A group of four clay jars cool after being removed from the bonfire and dipped in bark solution. The solution carbonizes as it comes in contact with the hot surface of the pot, creating a glossy darkened surface that reduces the jar's porosity. A portion of one jar's rim has broken off during the firing and finishing process. Visible on the lower pot surfaces is the maize cob (bledjukaan in Nafaanra) roulette applied to create a roughened surface prior to firing. Shallow grooves used to decorate the upper surfaces are visible on the jar in the foreground. Pieces of bark from the bark solution adhere to the jars' surfaces. Bondakile, October, 1982.
Finished and dried clay pottery jars are carefully placed on top of firewood in preparation for firing. Previously fired broken or flawed pots are used to bank the fuel, keeping it in place. Additional fuel will be placed on top of the stacked pottery and the fuel set on fire. The resulting bonfire will be allowed to burn down, after which the pots will be removed and finished while hot by being dipped in a bark solution. Mensah Listowell, Research Assistant (blue shirt), stands by as the potters prepare to place more fuel on the stacked pottery. Bondakile, October, 1982.
A potter uses a pole to carry a hot clay jar from the smoldering bonfire (behind). She is carrying it to a pottery bowl that contains a solution of pounded bark into which she will dip the jar to create a finish. Newly fired pots are visible in the remains of the bonfire, lying on their sides. A row of upturned, previously fired but broken pots forms a bank around the bonfire's edge. Bondakile, October, 1982.
Potters place the pounded bark of specific trees (surom, layene, koko or lakroas they are known in Nafaanra) in water to create a solution used to finish pots. The red-colored solution carbonizes on the surface of hot pots just removed from the bonfire. Here, the prepared solution awaits as the pots are being fired. A plastic container floats on the surface. Bondakile, October, 1982.
Clay pots that have been fired and finished by dipping in a bark solution cool as a group looks on. To the right, a woman is dipping a clay pot just removed from the fire in a bark solution contained within a large metal cooking pot. She uses a long pole to turn the pot. The bark solution carbonizes as it comes in contact with the hot clay surface, creating a darkened sheen, as on the pots to the left. From left, Vida, Enoch Mensah (research assistant, blue shirt) and Obimpeh. Center and right, Yaa Sunyani (blue head scarf) Akua Kpͻͻ and Yaa Kpͻͻ (pink top). In the background (right) a fenced kitchen garden is visible. Adadiem, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Adadiem
Subjects:
Potting; Metal pots; Finishing; Soup pots (sro cho); Headpan
A potter tends the bonfire in which clay pottery jars are being fired. She uses a long pole to adjust the grass fuel laid on top of the pots and the wood fuel beneath them. A bank of previously fired and broken pots holds the fire in place. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
The remains of a pottery-firing bonfire after the newly fired pots have been removed. Most of the jars visible here were fired prior to this bonfire. Broken or otherwise flawed, they were used to create a bank around the bonfire at its base. The bonfire's fuel has been reduced to an ash layer that remains in the center. Bondakile, October, 1982.
Sheep feed on the edges of a bonfire where clay jars are being fired. Grass has been laid as fuel over the carefully stacked pottery. Wood fuel lies beneath. At the bonfire's base, the broken pots used to bank the fire are visible. The fire will be allowed to burn down, after which the jars will be removed and, while still hot, dipped in a bark solution that coats the pot with a finish. Bondakile, October, 1982.
Fired, blackened clay grinding bowls are stacked (center). While hot from the fire, the bowls have been blackened by rolling them in dry grass or peanut shells. To the right, a bonfire firing is in progress. The outside perimeter of the fire is banked with previously fired but broken jars. To the left, a large clay bowl contains a bark solution into which the pots are dipped while still hot from the fire. Behind that, another bonfire burns. To the right (back, center) pots have been stacked in preparation for another bonfire firing. The fashion of blackening grinding bowls began in the Banda area sometime during the 20th century. Adadiem, 1994.
Dried clay jars are carefully placed on top of firewood in preparation for firing. Their surfaces have been textured by rolling a maize cob (bledjukaan in Nafaanra) over the jars' lower surface (maize cob roulette) and decorated with shallow arched grooves made when the pot was in a leather-hard state. Additional fuel will be placed on top of the stacked pottery before the fire is lit. After the fire has burned down the pots will be removed and finished by being dipped while hot in a bark solution. Bondakile, October, 1982.
As the bonfire burns down, a helper uses a long pole to prepare the newly fired clay pots for removal. The neatly stacked pots lie on their sides. Around the edges, a bank of previously fired and broken pots, some turned upside-down, were used to hold the fuel and pots in place as the bonfire was built. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
With moistened hands, a standing potter smooths the rim of a partially finished clay jar. As she works, she moves clockwise around the wooden stump that supports the palette (kpankpa in Nafaanra) on which the pot is being molded. Bondakile, October, 1982.
A potter uses a draw-and-drag (direct pull) technique as she begins to mold the body and rim of a pottery jar from a lump of moist clay. The clay rests on a palette (kpankpa in Nafaanra) supported by a stump. She moves clockwise around the stump as she uses her hands to pull the clay upward and outward to form the walls of the pot. Bondakile, October, 1982.
Adwoa Miwo (right) learns to make clay pots from her experienced potter mother, Peni Ngunu Chͻ (center), as they work together in the interior courtyard of their house. Mosi Nyuu (husband and father) looks on. Partially finished clay jars sit nearby, resting on the palettes (kapankpa in Nafaanra) on which they have been formed. The more experienced mother is making a larger jar than her apprentice daughter. Also placed around the house's interior courtyard are two dark-colored clay soup pots (chiin sinyjͻlͻ in Nafaanra) and a wooden mortar (right). Thatch- and metal-roofed rooms surround the courtyard. Dorbour, 1994.
This short video made from still photographic images illustrates the firing techniques of Banda-area potters. It shows examples of bonfire firing and post-firing treatment of vessels in a solution of pounded bark. Images include a 1982 sequence following Mo potters in Bondakile and 1994 images of Nafana potters in Adadiem and Dorbour, featuring Afua Donkor and Yaa Nsiah Adiemu from the latter. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Adadiem, Dorbour, 1994. Length: 4.22 minutes.
A potter sits on a stool as she molds the upper body of a clay water jar (chͻkoo in Nafaanra). In her right hand she uses a maize cob (bledjukaan in Nafaanra), pulling it against the exterior surface to smooth and thin the clay. In the foreground are water jars whose leather-hard upper body and rim have been joined to a rounded base, their clay bases still moist and not yet smoothed. Large wooden mortars and a headpan containing moist clay sit nearby as she works in the shade of an open-sided room. Dorbour, 1994.
Afua Donkor, a Nafana potter, uses a pestle to pound bark that will be used to make a solution to finish clay pots. In a nearby headpan, more stripped bark awaits pounding. After pounding, the bark will be soaked in water. Hot clay pots just removed from the bonfire will be dipped and turned in the solution. This colors the pots and is said to reduce their porosity. She sits on a stool as she works in the courtyard near a hearth. Nearby is a large metal cooking pot, several wooden mortars and a number of pestles. Finished clay soup cooking pots (chiin sinyjͻlͻ in Nafaanra) sit behind her ready for sale. Dorbour, 1994.
Unfinished clay grinding bowls dry on the palettes (kpankpa in Nafaanra) on which they were formed. After they have dried to a leather-hard state, the potter will remove them from their palettes and score their interiors. The scoring creates a grinding surface used to process vegetables which are added to soups. These bowls may also serve as men's eating bowls (pԑԑ in Nafaanra). Immediately behind the drying bowls is a hearth, swept clean of ashes. Pottery jars can be seen drying in background, right. A chicken forages nearby. Bondakile, October, 1982.
A standing potter puts the finishing touches on the rim of a clay jar that she has molded using a draw-and-drag (direct pull) technique. She has finished the body, neck and rim of the jar and will now set it aside to dry. After it has dried to a leather-hard state, she will remove the jar from the palette (kpankpa in Nafaanra) on which it has been formed and she will add a rounded base. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. As she began she drew the moist clay upward and outward from the lump with which she started. Here she shapes the jar's neck and outward flaring rim. Before doing so, she has smoothed away finger marks created as she formed the jar's body. As she works, she moves around the stump that supports the palette on which the jar is being formed. Bondakile, October, 1982.