Excavations in unit 42N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at Mound 6, Ngre Kataa. Foreground, left, a grinding stone (GS 08-10) rests with its working surface face down. It sits at a slightly higher level than a nearby (left) whole pottery jar (NK 08-406). To the right of these, a partial pot (NK 08-282) and a tuyere fragment (NK 08-284) are clustered together with two halves of a broken pottery jar, lying with its exterior surface facing down. To the south (behind), near the sign board and framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Another partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12) have been exposed to the left of the sign board at 77 cm below the unit's datum. The narrow dark bands visible in the soil are the traces of animal burrows. Photo scale adjacent to the sign board in centimeters. View looking south. Site Ngre Kataa. 7 July 2008.
Photo of a pottery bowl rim and body, with profile depicted (left). The bowl's interior surface is decorated with lines of red paint applied in reticulate and pendant patterns. The rim of the bowl is slightly everted. A portion of the interior surface is blackened as an effect of firing. An INAA sample ("Banda 27-11") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 34 cm at exterior lip. Sherd represents an estimated 20% of the bowl's circumference. Scale in cm. Site Banda 27. 28 February, 2001.
Photo of a pottery bowl rim and body, exterior surface, with profile depicted (left). The rim of the bowl is slightly everted. The bowl's exterior is decorated with several bands of red paint, one applied below the angle of the rim, one mid-way down the bowl body, and one toward the base. Blackened areas of the exterior are a result of firing. An INAA sample ("Banda 27-11") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 34 cm at exterior lip. Sherd represents an estimated 20% of the bowl's circumference. Scale in cm. Banda 27. 28 February, 2001.
Photo of a pottery bowl rim, exterior surface, with profile depicted (left). The bowl is decorated with several shallow horizontal grooves above its angular carination. A row of vertical impressions marks the carination, below which is a zone of angled "dentate" impressions, bounded by a shallow groove at its lower edge. Traces of red paint appear on the upper portions of the bowl. An INAA sample ("Banda 27-1") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 20 cm at the interior lip. Sherd represents an estimated 15% of the bowl's circumference. Scale in cm. Site Banda 27. 29 January, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Banda 27, Mound 1, Unit 1, Level 3
Date:
2001-01-29
Location(s) Facet:
Site Banda 27
Subjects:
Dentate impression; Red paint; Bowl; Neutron Activation Analysis
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
The mouth of a perforated shrine pot (left) is covered with the pedestaled base of another pot. It remains in situ as the surrounding areas of unit 46N 2W are excavated to lower levels. Behind, the stratified layers of Mound 6 are visible in the unit's north wall. Center (back) are a series of anvil and grinding stones exposed at higher mound levels in other excavation units. During excavations in 2008, a cluster of four anvil/grinding stones was found at a level slightly higher than but adjacent (left/west) to the perforated pot. At right, in lower levels, two grinding stones rest at an angle in association with a burned feature. Archaeologists interpret Mound 6 as a metallurgical workshop at which stratified levels built up through repeated use of the same location. Photo scale in centimeters. Site Ngre Kataa. 2 July, 2009.
A partially reconstructed everted-rim pottery jar excavated from Banda area site A-212, Mound 7, level 10. The jar's exterior surface is decorated below the neck with closely spaced rows of dentate (comb) impressions, intersected by a double diagonal line of dentate impressions. Double lines of dentate impression applied in a chevron pattern form a band between the upper zone of dentate decoration and jar's plain base. The jar's interior is finished with an orange-red slip. An INAA sample ("A212-16") from this jar and was assigned to the "G1" group of ceramic fabrics and therefore likely made west of the Banda hills. Rim diameter 24 cm at exterior lip. Photo scale in cm. Site A-212. 1 February, 2001.
Photo of a partial rim and neck of a mica- and red-slipped everted jar, with vessel profile depicted, left. Red slip has been applied to the rim. Overall mica slip covers the area from the neck down. The neck area is decorated with closely spaced horizontal grooves, with mica slip applied over top. A row of dentate (comb) impression marks the transition to a mica-slipped, but otherwise undecorated, body. INAA sample ("Banda 40-11") assigned to the "L" group of ceramic fabrics; therefore, likely made from clays mined west of the Banda hills. Rim diameter 24 cm at exterior lip. Neck diameter 16 cm at interior constriction. Scale in cm. Ngre Kataa (Banda 40), 30 March, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 4, Unit 1, Level 27
Date:
2001-03-30
Location(s) Facet:
Ngre Kataa
Subjects:
Mica slip; Red slip; Dentate impression; Jar; Neutron Activation Analysis
Photo of a reconstructed carinate globular pottery jar, with profile depicted (left). The jar was found in an upright position beneath a lens of hardened clay, its rim at 211 cm below datum and its base at 224 cm bd. The jar's mouth is small. Below its lip is a ridge marked with vertical impressions. The surface above the carinated shoulder is decorated with alternating horizontal lines of dentate (comb) impression and grooving. Below the carination, the base and lower portions of the jar are decorated with a carved roulette impression. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. An INAA sample (NA "KK 95-61") from this jar was assigned to the "K1" group of ceramic fabrics. The jar was therefore likely made east of the Banda hills. A jar of similar form, decoration, and interior wear (KK 95-693) was found one meter away and at a slightly lower level in the east profile wall of the excavation unit. Rim diameter: 8 cm. Photo scale in cm. Kuulo Kataa. 13 June, 1995.