An educational poster with pictures and text which describes Banda-area village life from the 15th through the 17th centuries. It briefly summarizes what has been learned from archaeological excavations at Kuulo Kataa about metal working. It also outlines the use of wild and domestic animals and the new objects and practices that developed in this time when trade connections with the Niger River area were strong. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text which describes Banda-area village life during the 13th to the 15th centuries. It briefly summarizes what has been learned from archaeological excavations about handicrafts at Ngre Kataa including metal working and pottery making. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are available in the Banda Cultural Centre, Ahenkro.
In June 2011, Banda Research Project team member Amanda Logan collaborated with local artist Kwame K.B. 2 to develop paintings for the doors of the Banda Cultural Centre's courtyard. The paintings illustrate crafts practiced in the area for which we have archaeological evidence. This image shows a blacksmith forging iron. Based on the presence of byproducts like slag and the tools used to make metal, we know that blacksmiths smelted and forged iron in the Banda area from at least 1000 years ago. Banda Cultural Centre, Ahenkro, June, 2016.
Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
A crucible used to process copper alloys from Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12. Crucibles like this would have been used to heat copper alloys to a liquid state for use in casting, including casting through a lost-wax process. Scale in cm. Kuulo Kataa, 27 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Handicraft; Metal casting; Metalworking; Copper alloys; Lost wax casting; Archaeology; Lost-wax process; Crucibles; Artifacts (Antiquities)
A burned, irregularly shaped basin-like feature exposed in level 3 of unit 128W 26S, Mound 138, Kuulo Kataa. The presence of slag and burned features like this one suggest that Mound 138 was a place where the site's occupants worked metals. Kuulo Kataa, 15 July, 1995.
A burned basin-like feature is visible in profile in the east wall of excavation unit 130W 26S, Mound 138, Kuulo Kataa. Clustered and adjacent to the burned area at the base of level 7 are three pottery pedestal bases, broken away from their original pots. The presence of slag and other burned features in adjacent units suggest that Mound 138 was a place where the site's occupants worked metals. A photo scale with 5 cm intervals points north. Kuulo Kataa, 14 July, 1995.
A burned basin-like feature is visible in profile in the east wall of excavation unit 130W 26S, Mound 138, Kuulo Kataa. Based on the presence of slag and other burned features in adjacent units, the mound is interpreted as a place where the site's occupants were working metals. A photo scale with 5 cm intervals points north. Kuulo Kataa, 14 July, 1995.
Several grinding stones, a whole pot and a cluster of pottery sherds have been exposed in situ at the base of level 3, unit 44N 4W at Mound 6, Ngre Kataa. The large grinding stone in the foreground (grinding stone 1, NK-08-112) is oriented with its grinding surface facing down. Another smaller stone rests on a soil pedestal created as archaeologists excavated surrounding soil to a lower level. Upper right, a whole pottery jar (NK-08-176) sits next to a large grinding stone (grinding stone 3, NK-08-173) oriented with its grinding surface up. To the far left, above the photo scale in centimeters, archaeologists have exposed the edges of a pottery jar, broken in half and lying on its side. As excavations extended into the adjacent unit (42N 4W, to the left), this broken pot was found to be associated with two tuyere fragments. This cluster of grindstones, tuyeres and nearby burned features is interpreted as part of a larger metal-working workshop, the activities of which led to the build up of mound 6. The soil on the right side of the unit is darker because it is moister than that on the left. View to west. Site Ngre Kataa. 1 July, 2008.
Banda Research Project team members Amanda Logan (right) and Amy Groleau (left) draw a plan map of units 44N 4W and 44N 6W, Mound 6, Ngre Kataa. They map in situ artifacts and features, including several large grinding stones, a whole pot, pottery clusters and a tuyere fragment. Wooden stakes mark the corners of 2 x 2 meter excavation units. A photo scale place near a partially exposed everted rim jar in unit 44N 6W (NK-08-407) is in 5 centimeter increments. Ngre Kataa, 7 July, 2008.