Subject(s): metalworking - Improving African Futures Using Lessons from the Past

Start Over Subject(s) metalworking

1. Banda in the 15th to 17th centuries. Poster, 2011

Description:: An educational poster with pictures and text which describes Banda-area village life from the 15th through the 17th centuries. It briefly summarizes what has been learned from archaeological excavations at Kuulo Kataa about metal working. It also outlines the use of wild and domestic animals and the new objects and practices that developed in this time when trade connections with the Niger River area were strong. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17060 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17073
Location(s) Facet:: Banda
Subjects:: Kuulo Kataa; Community engagement; Poster
Subjects Facet:: Dogs; Handicraft; Metal casting; Smelting; Pottery making; Metalworking; Tobacco; Foodways; Ivory; Iron; Corn; Tobacco pipes; Copper alloys; Forging; Beads; Heritage
Creator:: Dr. Ann B. Stahl
Contributors:: Dr. Ann B. Stahl
Date searchable:: 1400-1650
Date searchable:: 2011-06
Genre:: Poster
Genre Facet:: Poster
Format:: Image
Language Facet:: English
Location(s):: Banda
Date Digitized:: 2016
People Facet:: Dr. Ann B. Stahl

2. Banda in the 13th to 15th centuries. Poster, 2011

Description:: An educational poster with pictures and text which describes Banda-area village life during the 13th to the 15th centuries. It briefly summarizes what has been learned from archaeological excavations about handicrafts at Ngre Kataa including metal working and pottery making. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are available in the Banda Cultural Centre, Ahenkro.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17060
Location(s) Facet:: Banda
Subjects:: Community engagement; Ornaments; Poster; Ngre Kataa
Subjects Facet:: Handicraft; Metal casting; Pottery making; Metalworking; Forging; Iron; Copper alloys; Ivory; Heritage
Creator:: Dr. Ann B. Stahl
Contributors:: Dr. Ann B. Stahl
Date searchable:: 1200-1450
Date searchable:: 2011-06
Genre:: Poster
Genre Facet:: Poster
Format:: Image
Language Facet:: English
Location(s):: Banda
Date Digitized:: 2016
People Facet:: Dr. Ann B. Stahl

3. Banda Cultural Centre painting of a man working metal, 2016

Description:: In June 2011, Banda Research Project team member Amanda Logan collaborated with local artist Kwame K.B. 2 to develop paintings for the doors of the Banda Cultural Centre's courtyard. The paintings illustrate crafts practiced in the area for which we have archaeological evidence. This image shows a blacksmith forging iron. Based on the presence of byproducts like slag and the tools used to make metal, we know that blacksmiths smelted and forged iron in the Banda area from at least 1000 years ago. Banda Cultural Centre, Ahenkro, June, 2016.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17078 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17079 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17084
Location(s) Facet:: Ahenkro
Subjects:: Banda Cultural Centre; Community engagement
Subjects Facet:: Handicraft; Metalworking
Creator:: Dr. Ann B. Stahl
Contributors:: Dr. Ann B. Stahl; Dr. Amanda L. Logan
Date searchable:: 2016
Date searchable:: 2016-06
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ahenkro;8.165961, -2.354312
People Facet:: Dr. Ann B. Stahl
Geographic Coordinates:: 8.165961, -2.354312

4. Excavations at a metal working area, Ngre Kataa, 2009

Description:: Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Ngre Kataa, Mound 6
Location(s) Facet:: Ngre Kataa
Subjects:: Workshop; Mound 6
Subjects Facet:: Handicraft; Metallurgy; Archaeology; Metalworking; Forging; Excavations (Archaeology); Iron; Copper alloys
Creator:: Dr. Ann B. Stahl
Contributors:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-27
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Geographic Coordinates:: 8.11277778, -2.30611111

5. Crucible, Kuulo Kataa, 2000

Description:: A crucible used to process copper alloys from Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12. Crucibles like this would have been used to heat copper alloys to a liquid state for use in casting, including casting through a lost-wax process. Scale in cm. Kuulo Kataa, 27 June, 2000.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12
Location(s) Facet:: Kuulo Kataa
Subjects Facet:: Handicraft; Metal casting; Metalworking; Copper alloys; Lost wax casting; Archaeology; Lost-wax process; Crucibles; Artifacts (Antiquities)
Identifier:: Catalog number SF-KK-00-229
Creator:: Dr. Ann B. Stahl
Contributors:: Dr. Ann B. Stahl
Date searchable:: 2000
Date searchable:: 2010-08-20
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Kuulo Kataa;8.14847222, -2.37472222
People Facet:: Dr. Ann B. Stahl
Geographic Coordinates:: 8.14847222, -2.37472222

6. Burned feature, unit 128W 26S, Mound 138, Kuulo Kataa, 1995

Description:: A burned, irregularly shaped basin-like feature exposed in level 3 of unit 128W 26S, Mound 138, Kuulo Kataa. The presence of slag and burned features like this one suggest that Mound 138 was a place where the site's occupants worked metals. Kuulo Kataa, 15 July, 1995.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17575; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17574
Provenance:: Kuulo Kataa, Mound 138, Unit 128W 26S, Level 3
Date:: 1995-07-15
Location(s) Facet:: Kuulo Kataa
Subjects Facet:: Archaeology; Excavations (archaeology); Metalworking
Identifier:: 26
Creator:: Dr. Ann B. Stahl
Contributors:: Andrew Black
Date searchable:: 1995-07-15
Genre:: 35 mm slide
Genre Facet:: 35 mm slide
Location(s):: Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:: 2019-11-08
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Commentary:: Slide scanned by Ann B. Stahl
Geographic Coordinates:: 8.14847222, -2.37472222

7. East wall, unit 130W 26S, Mound 138, Kuulo Kataa, 1995

Description:: A burned basin-like feature is visible in profile in the east wall of excavation unit 130W 26S, Mound 138, Kuulo Kataa. Clustered and adjacent to the burned area at the base of level 7 are three pottery pedestal bases, broken away from their original pots. The presence of slag and other burned features in adjacent units suggest that Mound 138 was a place where the site's occupants worked metals. A photo scale with 5 cm intervals points north. Kuulo Kataa, 14 July, 1995.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17575; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17576
Provenance:: Kuulo Kataa, Mound 138, Unit 130W 26S, East Wall
Date:: 1995-07-14
Location(s) Facet:: Kuulo Kataa
Subjects Facet:: Archaeology; Excavations (archaeology); Metalworking; Pottery
Creator:: Dr. Ann B. Stahl
Contributors:: Andrew Black
Date searchable:: 1995-07-14
Genre:: 35 mm slide
Genre Facet:: 35 mm slide
Format:: Image
Location(s):: Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:: 2019-11-08
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Commentary:: Slide scanned by Ann B. Stahl
Geographic Coordinates:: 8.14847222, -2.37472222

8. East wall, unit 130W 26S, Mound 138, Kuulo Kataa, 1995

Description:: A burned basin-like feature is visible in profile in the east wall of excavation unit 130W 26S, Mound 138, Kuulo Kataa. Based on the presence of slag and other burned features in adjacent units, the mound is interpreted as a place where the site's occupants were working metals. A photo scale with 5 cm intervals points north. Kuulo Kataa, 14 July, 1995.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17574; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17576
Provenance:: Kuulo Kataa, Mound 138, Unit 130W 26S, East Wall
Date:: 1995-07-14
Location(s) Facet:: Kuulo Kataa
Subjects Facet:: Archaeology; Excavations (archaeology); Metalworking
Identifier:: 3
Creator:: Dr. Ann B. Stahl
Contributors:: Andrew Black
Date searchable:: 1995-07-14
Genre:: 35 mm slide
Genre Facet:: 35 mm slide
Location(s):: Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:: 2019-11-08
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Commentary:: Slide scanned by Ann B. Stahl
Geographic Coordinates:: 8.14847222, -2.37472222

9. In situ grinding stones and pottery, unit 44N 4W, Mound 6, Ngre Kataa, 2008

Description:: Several grinding stones, a whole pot and a cluster of pottery sherds have been exposed in situ at the base of level 3, unit 44N 4W at Mound 6, Ngre Kataa. The large grinding stone in the foreground (grinding stone 1, NK-08-112) is oriented with its grinding surface facing down. Another smaller stone rests on a soil pedestal created as archaeologists excavated surrounding soil to a lower level. Upper right, a whole pottery jar (NK-08-176) sits next to a large grinding stone (grinding stone 3, NK-08-173) oriented with its grinding surface up. To the far left, above the photo scale in centimeters, archaeologists have exposed the edges of a pottery jar, broken in half and lying on its side. As excavations extended into the adjacent unit (42N 4W, to the left), this broken pot was found to be associated with two tuyere fragments. This cluster of grindstones, tuyeres and nearby burned features is interpreted as part of a larger metal-working workshop, the activities of which led to the build up of mound 6. The soil on the right side of the unit is darker because it is moister than that on the left. View to west. Site Ngre Kataa. 1 July, 2008.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17601; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:: Ngre Kataa, Mound 6, Unit 44N 4W, level 3
Date:: 2008-07-01
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Tuyere
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Identifier:: Catalog numbers NK-08-112, 08-176 and 08-173
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008-07-01
Date searchable:: 2008
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

10. Drawing a plan map, Mound 6, Ngre Kataa, 2008

Description:: Banda Research Project team members Amanda Logan (right) and Amy Groleau (left) draw a plan map of units 44N 4W and 44N 6W, Mound 6, Ngre Kataa. They map in situ artifacts and features, including several large grinding stones, a whole pot, pottery clusters and a tuyere fragment. Wooden stakes mark the corners of 2 x 2 meter excavation units. A photo scale place near a partially exposed everted rim jar in unit 44N 6W (NK-08-407) is in 5 centimeter increments. Ngre Kataa, 7 July, 2008.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Ngre Kataa, Mound 6
Date:: 2008-07-07
Location(s) Facet:: Ngre Kataa
Subjects:: Mapping; Grinding stone
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008-07-07
Date searchable:: 2008
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

11. Excavation units at Mound 148, Kuulo Kataa, 2000

Description:: In-progress excavations of adjacent 2 x 2 m units at Mound 148, Kuulo Kataa. The base of units 70E 48-52N and 72E 50N have been excavated to depths ranging from 90-110 cm below datum. The large area of dark soil concentrated in unit 70E 50N (center) is intrusive pit fill which cut through the living surface at this mound level. An area of packed reddish-orange laterite gravel in unit 70E 52N (bottom, left) likely represents a prepared floor surface. To the right of the dark pit soil, in the boundary between units 70E 50N and 70E 48N, is a an irregularly shaped burned feature interpreted by archaeologists as likely associated with metalworking. Two radiocarbon samples associated with this burned feature had calibrated age ranges between c.1200-1400 CE. A cluster of hearth stones has been exposed in nearby unit 72E 50N (center photo). White bags filled with soil samples collected for flotation sit outside the excavated area together with excavation equipment. View looking eastwards. Kuulo Kataa, 11 July, 2000.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Kuulo Kataa, Mound 148
Date:: 2000-07-11
Location(s) Facet:: Kuulo Kataa
Subjects:: Floors; Pits
Subjects Facet:: Archaeology; Excavations (Archaeology); Metalworking
Identifier:: 16
Creator:: Dr. Ann B. Stahl
Contributors:: Alex Caton
Date searchable:: 2000-07-11
Date searchable:: 2000
Genre:: 35 mm slide
Genre Facet:: 35 mm slide
Format:: Image
Location(s):: Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:: 2019-11-08
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Commentary:: Slide scanned by Ann B. Stahl
Geographic Coordinates:: 8.14847222, -2.37472222

12. In situ pottery and grinding stones, unit 42N 4W, Ngre Kataa, 2008

Description:: Excavations in unit 42N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at Mound 6, Ngre Kataa. Foreground, left, a grinding stone (GS 08-10) rests with its working surface face down. It sits at a slightly higher level than a nearby (left) whole pottery jar (NK 08-406). To the right of these, a partial pot (NK 08-282) and a tuyere fragment (NK 08-284) are clustered together with two halves of a broken pottery jar, lying with its exterior surface facing down. To the south (behind), near the sign board and framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Another partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12) have been exposed to the left of the sign board at 77 cm below the unit's datum. The narrow dark bands visible in the soil are the traces of animal burrows. Photo scale adjacent to the sign board in centimeters. View looking south. Site Ngre Kataa. 7 July 2008.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19136; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19177; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:: Ngre Kataa, Mound 6, unit 42N 4W
Date:: 2008-07-07
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Burned basin; Tuyere
Subjects Facet:: Archaeology; Excavations (Archaeology); Handicrafts; Metalworking; Pottery
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008-07-07
Date searchable:: 2008
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

13. Grinding stone, Mound 6, Ngre Kataa, 2008

Description:: A deeply worn grinding stone (grindstone 1, NK-08-112) removed from levels 1-2, unit 44N 4W, Mound 6, Ngre Kataa, photographed at the side of the excavation unit. The grinding stone was found in association with other grinding stones, tuyere fragments and whole and partial pots. When found, the grinding stone was oriented with its working surface facing downward. It was located adjacent to a concentration of dark soil (feature 1) that contained abundant oxidized sediment, slag and broken pottery. Archaeologists interpret the features at Mound 6 as facilities used to make and process metals. Photo scale in 5 centimeter increments. Ngre Kataa, 2 July, 2008.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17602
Provenance:: Ngre Kataa, Mound 6, Unit 44N 4W, levels 1-2
Date:: 2008-07-02
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone
Subjects Facet:: Archaeology; Excavations (Archaeology); Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008-07-02
Date searchable:: 2008
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

14. Burned feature, unit 50N 4W, Mound 6, Ngre Kataa, 2009

Description:: The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17594
Provenance:: Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
Date:: 2009-06-29
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Burned basin
Subjects Facet:: Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009-06-29
Date searchable:: 2009
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

15. Burned feature in a metallurgical workshop, Mound 6, Ngre Kataa, 2009

Description:: The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17593
Provenance:: Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
Date:: 2009-06-29
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Burned basin
Subjects Facet:: Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009-06-29
Date searchable:: 2009
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

16. Perforated pottery jar, Mound 6, Ngre Kataa, 2009

Description:: A perforated pottery jar lidded with the pedestaled base of another pot sits in situ at the base of level 6, unit 46N 2W at Mound 6. The pot contained eight cowries and is interpreted by archaeologists as a shrine pot placed in association with metalworking facilities. Photo scale in 5 cm increments. Site Ngre Kataa. 24 June, 2009.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597
Provenance:: Ngre Kataa, Mound 6, 46N 2W, Level 6
Date:: 2009-06-24
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Shrines; Pottery; Metalworking; Cowries; Artifacts (Antiquities)
Identifier:: Catalog number NK-09-789
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009-06-24
Date searchable:: 2009
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

17. North wall, unit 46N 2W, Mound 6, Ngre Kataa, 2009

Description:: The mouth of a perforated shrine pot (left) is covered with the pedestaled base of another pot. It remains in situ as the surrounding areas of unit 46N 2W are excavated to lower levels. Behind, the stratified layers of Mound 6 are visible in the unit's north wall. Center (back) are a series of anvil and grinding stones exposed at higher mound levels in other excavation units. During excavations in 2008, a cluster of four anvil/grinding stones was found at a level slightly higher than but adjacent (left/west) to the perforated pot. At right, in lower levels, two grinding stones rest at an angle in association with a burned feature. Archaeologists interpret Mound 6 as a metallurgical workshop at which stratified levels built up through repeated use of the same location. Photo scale in centimeters. Site Ngre Kataa. 2 July, 2009.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19131
Provenance:: Ngre Kataa, Mound 6, unit 46N 2W
Date:: 2009-07-02
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Stratigraphy
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009-07-02
Date searchable:: 2009
Genre:: Digital image
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Facet:: Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

18. Large slag nodule, Ngre Kataa, Mound 8, 2008

Description:: Iron slag is formed as a byproduct of iron smelting. Here a large slag nodule has broken in half, revealing its interior texture. At the archaeological site of Ngre Kataa, large chunks of 'bubbly' slag like this were occasionally found in household and other contexts, away from areas otherwise associated with metal-working activities. Potters at the time of the site's occupation had begun to use crushed iron slag as a tempering agent in their potting clays, which may explain why large nodules were being carried and cached in areas away from metal-working locations. Ngre Kataa, June, 2008.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Ngre Kataa, Mound 8, Unit 8N 127E, Level 3
Date:: 2008-06-23
Location(s) Facet:: Ngre Kataa
Subjects:: Slag
Subjects Facet:: Archaeology; Metalworking; Metallurgy; Pottery making; Artifacts (Antiquities)
Identifier:: NK08-027
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-06-23
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

19. Large slag nodule, Ngre Kataa, Mound 8, 2008

Description:: Iron slag is formed as a byproduct of iron smelting. Here a large slag nodule has broken in half, revealing its interior texture. At the archaeological site of Ngre Kataa, large chunks of 'bubbly' slag like this were occasionally found in household and other contexts, away from areas otherwise associated with metal-working activities. Potters at the time of the site's occupation had begun to use crushed iron slag as a tempering agent in their potting clays, which may explain why large nodules were being carried and cached in areas away from metal-working locations. Ngre Kataa, June, 2008.
Rights:: Creative Commons Attribution--NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Ngre Kataa, Mound 8, Unit 8N 127E, Level 3
Date:: 2008-06-23
Location(s) Facet:: Ngre Kataa
Subjects:: Slag
Subjects Facet:: Archaeology; Metalworking; Metallurgy; Pottery making; Artifacts (Antiquities)
Identifier:: NK08-027
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008-06-23
Date searchable:: 2008
Genre Facet:: Digital image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

20. Burned features and insitu stones, Ngre Kataa, 2009

Description:: View across open excavations in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The photo centers on units 46N 8W (foreground) and the southern half of 48N 8W, the north wall of which (at 47N) can be seen behind the sign board. The exposed areas were excavated in 2008 and the photo taken in preparation for 2009 excavations. Traces of circular burned features, red-orange and yellow in color, can be seen in the freshly scraped surface of these units. The uppermost north arrow sits to the right (east) of the circular outline of a still-buried everted-rim jar. Another everted-jar rim can be seen exposed in the north wall at 47N. This rim and associated artifacts formed cluster B, part of a larger shrine feature (clusters A-D) that extended across the northern half of unit 48N 8W (beneath and behind the small tree trunk visible above and left of the sign board). Cluster A (unit 46N 8W) comprised a large pottery bowl surrounded by six iron bangles that was removed in 2008. It was positioned above and slightly west (left) of the burned feature (center photo) that is intersected by a tree root. Cluster B included the artifacts seen here in the north wall at 47N, together with an associated cluster of a pedestal-handled pot lid, dog skull and jaw bones revealed by further excavation beneath and west (left) of the tree stump. In the upper right of the photo (north and east), insitu anvil (GS 09-15, left) and grinding (GS 09-12, right) stones are visible in unit 50N 6W. Photo scales marked in 5 cm increments and measuring tape marks 2 m. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19152
Provenance:: Ngre Kataa, Mound 6, Units 46-48N 8W, 100 cm bd
Date:: 2009-06-06
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Pottery; Shrines
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-06
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa; 8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

21. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:: Insitu anvil/grinding stones in excavation unit 50N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. A large anvil stone (GS 09-15, foreground, left) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. A large tree root is visible to the west of the stone, behind which is an area of unexcavated soil on top of which pottery sherds had been found (now removed). To the east and flanked by the black-and-white photo scale is the partial rim of an everted-rim jar (NK 09-749). To the north of this, a large flat grinding stone (GS 09-12) has been pedestaled in place. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:: 2009-06-06
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-06
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

22. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:: Insitu anvil/grinding stones in excavation unit 50N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Left of center photo, a large anvil stone (GS 09-15) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. Behind this stone is an area of unexcavated soil on top of which pottery sherds had been found (now removed). Lower foreground, flanked by the black-and-white photo scale, is the partial rim of an everted-rim jar (NK 09-749). To the north of this (right), a large flat grinding stone with a well-worn upper surface (GS 09-12) has been pedestaled in place. Visible in the southern corner of the west wall of the unit (upper left) in this photo is a flat iron disk (SF 09-159), embedded in the wall above a small stone. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:: 2009-06-06
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-06
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

23. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:: Two views of insitu anvil/grinding stones in excavation unit 50N 6W, part of an area (mound 6) that archaeologists interpret as a metallurgical workshop. In the photo looking northward (arrows point north), a large anvil stone (GS 09-15, foreground, left) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. A large tree root is visible to the west of the stone, behind which is an area of unexcavated soil on top of which pottery sherds had been found (now removed). To the east and flanked by the black-and-white photo scale is the partial rim of an everted-rim jar (NK 09-749). To the north of this, a large flat grinding stone (GS 09-12) has been pedestaled in place. In the view looking west, the well-worn upper surface of this narrow stone can be seen. Visible in the southern corner of the west wall of the unit (upper left) in this photo is a flat iron disc (SF 09-159), embedded in the wall above a small stone. Further excavation showed that this disc was part of an object cluster that included a tri-looped iron bangle and interpreted as part of a shrine. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19118
Provenance:: Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:: 2009-06-06
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-06
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

24. Burned features unit 50N 8W, Ngre Kataa, 2009

Description:: A cluster of burned features is exposed in the northwest corner of excavation unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). Along the unit's west wall (left in photo) is an amorphous zone of fire-hardened red (Munsell color 2.5YR 3/6) matrix. A piece of brass bar (SF NK 09-293) was found in soil associated with this burned feature. Above and to the right (northeast), two circular burned features are visible in outline. These basin-shaped features had a thin lining of fire-hardened sediment, red to dark red (Munsell 2.5 YR 3/6 & 4/8) in color. The basins were filled with loose ashy sediment and small pieces of charcoal. A sample of burned matrix from feature 1 (top right basin) yielded a thermoluminescence (TL) age estimate of 1500 +/- 40 CE (Univ. Wash. 2455). Further excavation revealed additional basin-shaped features beneath the amorphous burned feature. The excavation unit's northwest corner peg is visible, upper left. View looking north. Site Ngre Kataa. 27 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19109; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19111
Provenance:: Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:: 2009-06-27
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-07
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

25. Excavated burned basins, unit 50N 8W, Ngre Kataa, 2009

Description:: A cluster of burned basin-shaped features is exposed in the northwest corner of unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). The basins comprised a thin layer of fire-hardened sediment, red to dark red (Munsell colors 2.5 YR 3/6 & 4/8) in color. Basin features 1 (top right) and 2 (left of feature 1) measured about 8-9 cm deep and were filled with ashy soil. Basin feature 5 (far left) was shallower. Its fire-hardened surface showed a pinkish tinge. Samples of burned basin matrix from features 1 and 5 yielded thermoluminescence (TL) age estimates of 1500 +/- 40 CE (feature 1; Univ. Wash. 2455) and 1580 +/- 40 CE (feature 5; Univ. Wash. 2456). Photo bar marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 29 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:: Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:: 2009-06-29
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-29
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

26. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:: A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Two stones showing evidence of use as grinding stones sit nearby, a north arrow placed by one(GS 09-10; center photo) and one in the southwest corner of the excavation unit (GS 09-08; bottom right). Another insitu anvil stone (GS 09-6) sits in the northeast corner of an adjacent excavation unit (48N 0W; top right of photo). The narrow band of loose soil angled across the southwest corner of the excavation was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19119
Provenance:: Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:: 2009-06-02
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-02
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

27. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:: A boulder used as an anvil stone (GS 09-01) sits insitu in an excavated area interpreted as a metallurgical workshop. This was one of several boulders associated with burned features and other residues of metalworking. The boulder's upper surface showed signs of use wear and its south-facing side is marked by a deep cup-shaped depression that resulted from repeated use. A burned feature interpreted as the remains of a forge is visible behind the anvil stone (upper left) in the northwest corner of excavation unit 50N 2W. Flat photo scale in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:: Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:: 2009-06-01
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-01
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

28. Anvil stones in a metallurgical workshop, mound 6, Ngre Kataa, 2009

Description:: Excavations uncovered three insitu boulders placed in a row that were used as anvil stones in an area interpreted as a metallurgical workshop. Multiple surfaces of the boulders show signs of wear caused by hammering and grinding. Repeated use of the anvil stone in the foreground (GS 09-03) has created a clear depression on its upper surface and its left side is flattened by wear. The middle anvil stone (GS 09-02) has multiple depressions created by use on its upper surface. The anvil in the rear of the photo (GS 09-01) shows wear on its top and side surfaces, with dirt still embedded in a deep cup-shaped depression on its south-facing side in this photo. To the east (right) of the boulder in foreground, the flat surface of a grinding stone (GS 09-04) is visible in the east wall of the excavation unit. A broken pedestal base of a pot sits on its side to the east (right) of the middle anvil stone. In the upper left corner of the photo, a burned feature interpreted by archaeologists as the remains of a forge has been exposed. The red-and-white band above the photo sign is a two meter scale, marked in 10 cm increments. View looking north across two exavation units: 50N 2W (top of photo) and 48N 2W (bottom of photo). The 2x2m units have been excavated to slightly different depths. Site Ngre Kataa. 1 June, 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19121; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19181; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19182
Provenance:: Ngre Kataa, Mound 6, Units 48N 2W and 50N 2W, Level 4
Date:: 2009-06-01
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-01
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

29. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:: Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:: Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:: 2009-06-23
Location(s) Facet:: 8.11277778, -2.30611111
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-23
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

30. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:: The southeast corner of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop (mound 6). An anvil stone (top of photo; GS 09-06) is pedestaled insitu in the adjacent excavation unit (48N 0W). This stone was found immediately below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Stadia rod numbered intervals of 10 cm. View looking south. Site Ngre Kataa. 9 July 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19117
Provenance:: Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:: 2009-07-09
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-07-09
Genre Facet:: Digital image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

31. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:: The south wall of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop. An anvil stone (GS 09-06; left of the sign board) is pedestaled insitu in the adjacent excavation unit (48N 0W). Other pedestaled grinding stones are visible to the right and behind the sign board. These stones were found just below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below the anvil stone. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Ashy lenses are visible in the south and west walls. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Width of unit: 2 meters. Site Ngre Kataa. 9 July 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19116
Provenance:: Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:: 2009-07-09
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-07-09
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

32. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:: View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Provenance:: Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Date:: 2009-06-24
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-24
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

33. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:: A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
Provenance:: Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:: 2009-06-02
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-02
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

34. Burned features, unit 46N 2W, Ngre Kataa, 2009

Description:: Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
Provenance:: Ngre Kataa, Mound 6, Unit 46N 2W
Date:: 2009-06-24
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-24
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

35. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:: Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:: Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:: 2009-06-23
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-06-23
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

36. Insitu grinding stone and jar, mound 6, Ngre Kataa, 2008

Description:: View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19128
Provenance:: Ngre Kataa, Mound 6, Unit 44N 4W, Level 3
Date:: 2008-07-01
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Jar
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-01
Genre Facet:: Digital image
Format:: Image
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

37. In situ pottery and grinding stones, Ngre Kataa, 2008

Description:: Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:: Ngre Kataa, Mound 6, 42-46N 4W, Level 2
Date:: 2008-07-05
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Anvil stone
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-05
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

38. In situ pottery, anvil and grinding stones, Ngre Kataa, 2008

Description:: Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19138
Provenance:: Ngre Kataa, Mound 6, 44N 6W, 70 cm bd
Date:: 2008-07-05
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone; Jar
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-05
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

39. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:: The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19144; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19147; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:: Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:: 2008-07-09
Location(s) Facet:: Ngre Kataa;8.11277778, -2.30611111
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-09
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;
Coverage-Temporal:: Ngre Kataa
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

40. Insitu anvil/grinding stones, Ngre Kataa, 2008

Description:: A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596
Provenance:: Ngre Kataa, Mound 6, Unit 46N 4W, Level 3
Date:: 2008-07-03
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Anvil stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-03
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

41. Burned feature and stone hammer, Ngre Kataa, 2008

Description:: A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
Provenance:: Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:: 2008-07-05
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-05
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

42. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:: The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. At the base of the photo, center, is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north; above the photo scale) is a small coiled iron bangle made from a flattened piece of iron (SF NK 08-182). A smaller bangle-like artifact lies directly above the pot, center photo (north; SF 08-139). This area (cluster A) was part of a larger cluster (clusters A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View from above, north at top of photo. Photo scale in cm increments. Site Ngre Kataa. 9 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19146; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:: Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:: 2008-07-09
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-09
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

43. Burned features in a metalworking area, Ngre Kataa, 2008

Description:: An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the trunk of a small tree is visible, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. Center photo, flanked by photo scales, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19178
Provenance:: Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:: 2008-07-17
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-17
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
People Depicted:: Abass Idrisu
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

44. Insitu anvil/grinding stones and burned feature, Ngre Kataa, 2009

Description:: Looking eastward over excavation unit 48N 10W toward unit 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop, a series of anvil/grinding stones have been left in place and a burned feature exposed. Foreground, right, a large anvil stone (GS 09-33) rests atop another stone (GS 09-34). To the right (south), the circular rim of an everted-rim jar has been left in place. To the left (north) is a zone of darker ashy soil flecked with charcoal. Center photo is an anvil stone (GS 09-32), against which a partial elephant tusk--now removed--was found resting. Behind this stone is a tree root and base of a tree stump. The area from this stone (GS 09-32) and extending beyond the stump had been covered with artifacts (clusters B-D, now removed) that archaeologists interpret as a large shrine feature. Some of these artifacts were superimposed directly over the amorphous orange-red burned feature (center photo), which was likely created by high heat associated with forging metals. Other smaller stones have been left in place across the unit. Photo scales marked in 5 cm increments, arrows pointing north. Site Ngre Kataa. 4 July 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19171
Provenance:: Ngre Kataa, Mound 6, Units 48N 10W, 48 N 8W, Level 4
Date:: 2009-07-04
Location(s) Facet:: 8.11277778, -2.30611111
Subjects:: Anvil stone; Grinding stone; Jar
Subjects Facet:: Excavations (Archaeology); Archaeology; Pottery; Metalworking; Forging
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-07-04
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

45. Burned features in a metalworking area, Ngre Kataa, 2008

Description:: An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units (where the trunk of a small tree is visible, above left of the sign board). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. The everted rim of a pottery jar visible in the north wall of the excavation unit (top left) was part of an adjacent cluster (B) that also included iron bangles (SF 08-183 & 184). Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19180; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19140; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19178; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19149; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19169
Provenance:: Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:: 2008-07-17
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-17
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

46. Insitu pottery and grinding stones, Ngre Kataa, 2008

Description:: View looking northward of early stage excavations at mound 6, Ngre Kataa, an area that archaeologists interpret as a metallurgical workshop. Center view is of units 42-48N 4W. In foreground, excavations in units 42N 4W and 44N 4W ave exposed clusters of pottery, a grinding stones, tuyeres and an area of burned soil associated with metal working. Foreground, bottom right, are a partial pottery jar (NK 08-520) and to its right (east) a small flat grinding stone (GS 08-12; ). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. A whole pottery vessel sit at a slightly lower level (NK 08-406) a short distance away (south east). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Excavations in the adjacent unit (46N 2W) in 2009 revealed a perforated shrine pot resting at a slightly lower level next to these stones. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 5 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19136; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:: Ngre Kataa, Mound 6, 42-48N 4W, Level 2
Date:: 2008-07-05
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-05
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

47. Burned feature and stone hammer, Ngre Kataa, 2008

Description:: A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the right (west) of the hammerstone. The feature is likely associated with forging activities. The narrow dark lines in the soil are traces of animal burrowing activity. Photo scale by sign board in cm increments. View from above, arrow pointing north. Site Ngre Kataa. 7 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175
Provenance:: Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:: 2008-07-07
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-07
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

48. In situ pottery and tuyere, Ngre Kataa, 2008

Description:: Excavations on the south edge of unit 44N 4W have exposed a cluster of insitu pottery and a tuyere fragment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Foreground, broken pieces of a pottery jar lie with their exterior surfaces facing down. Behind them and left rests a tuyere fragment (NK 08-284), its circular cross-section visible in front of the sign board. To the right (west) of this cluster is an area of dark reddened soil, one of many examples of burned soil in this area where metals were worked. This diffuse area of reddened soil extended underneath the sherd cluster, center photo. To the right, embedded in the balk behind the north arrow (to its south), the tip of a partial iron point (SF 08-159) is visible (right of the circular patch of dark soil). Photo scale in front marked in cm. Arrow pointing north. Site Ngre Kataa. 10 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:: Ngre Kataa, Mound 6, 44 N 4W, Level 3
Date:: 2008-07-10
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking; Tuyere
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-10
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

49. Burned features in a metalworking area, Ngre Kataa, 2008

Description:: An arc of orange-red burned features is being revealed by excavations in units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the everted jar rim is visible in the north wall, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 16 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170
Date:: 2008-07-16
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-16
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

50. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:: A boulder used an an anvil stone (GS 09-03) sits insitu, center photo, in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The surface facing the camera is worn flat and smooth from use. Its upper surface shows depressions created by use. Behind this boulder is a flat grinding stone (GS 09-04) with a very worn upper surface. Another boulder (GS 09-02) is visible left (north). Behind it the pedestal base of a pot is visible along the adjacent unit's southern edge. The moistened soil in front of the sign board marked by two orange pin flags marks the find spot of an iron point (SF 09-033). Photo scale along unit edge measures two meters. Arrow pointing north. Site Ngre Kataa. 30 May 2009.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19089
Provenance:: Ngre Kataa, Mound 6, Unit 48N 2W, Level 4-5
Date:: 2009-05-30
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2009
Date searchable:: 2009-05-30
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:: 8.11277778, -2.30611111

Search

Search Constraints

Search Results