Search

Start Over Subject(s) metalworking

41. Burned feature and stone hammer, Ngre Kataa, 2008

Description:
A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

42. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. At the base of the photo, center, is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north; above the photo scale) is a small coiled iron bangle made from a flattened piece of iron (SF NK 08-182). A smaller bangle-like artifact lies directly above the pot, center photo (north; SF 08-139). This area (cluster A) was part of a larger cluster (clusters A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View from above, north at top of photo. Photo scale in cm increments. Site Ngre Kataa. 9 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19146; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:
Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:
2008-07-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

43. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the trunk of a small tree is visible, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. Center photo, flanked by photo scales, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19178
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:
2008-07-17
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-17
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Depicted:
Abass Idrisu
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

44. Insitu anvil/grinding stones and burned feature, Ngre Kataa, 2009

Description:
Looking eastward over excavation unit 48N 10W toward unit 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop, a series of anvil/grinding stones have been left in place and a burned feature exposed. Foreground, right, a large anvil stone (GS 09-33) rests atop another stone (GS 09-34). To the right (south), the circular rim of an everted-rim jar has been left in place. To the left (north) is a zone of darker ashy soil flecked with charcoal. Center photo is an anvil stone (GS 09-32), against which a partial elephant tusk--now removed--was found resting. Behind this stone is a tree root and base of a tree stump. The area from this stone (GS 09-32) and extending beyond the stump had been covered with artifacts (clusters B-D, now removed) that archaeologists interpret as a large shrine feature. Some of these artifacts were superimposed directly over the amorphous orange-red burned feature (center photo), which was likely created by high heat associated with forging metals. Other smaller stones have been left in place across the unit. Photo scales marked in 5 cm increments, arrows pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19171
Provenance:
Ngre Kataa, Mound 6, Units 48N 10W, 48 N 8W, Level 4
Date:
2009-07-04
Location(s) Facet:
8.11277778, -2.30611111
Subjects:
Anvil stone; Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

45. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units (where the trunk of a small tree is visible, above left of the sign board). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. The everted rim of a pottery jar visible in the north wall of the excavation unit (top left) was part of an adjacent cluster (B) that also included iron bangles (SF 08-183 & 184). Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19180; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19140; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19178; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19149; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19169
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:
2008-07-17
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-17
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

46. Insitu pottery and grinding stones, Ngre Kataa, 2008

Description:
View looking northward of early stage excavations at mound 6, Ngre Kataa, an area that archaeologists interpret as a metallurgical workshop. Center view is of units 42-48N 4W. In foreground, excavations in units 42N 4W and 44N 4W ave exposed clusters of pottery, a grinding stones, tuyeres and an area of burned soil associated with metal working. Foreground, bottom right, are a partial pottery jar (NK 08-520) and to its right (east) a small flat grinding stone (GS 08-12; ). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. A whole pottery vessel sit at a slightly lower level (NK 08-406) a short distance away (south east). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Excavations in the adjacent unit (46N 2W) in 2009 revealed a perforated shrine pot resting at a slightly lower level next to these stones. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 5 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19136; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:
Ngre Kataa, Mound 6, 42-48N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

47. Burned feature and stone hammer, Ngre Kataa, 2008

Description:
A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the right (west) of the hammerstone. The feature is likely associated with forging activities. The narrow dark lines in the soil are traces of animal burrowing activity. Photo scale by sign board in cm increments. View from above, arrow pointing north. Site Ngre Kataa. 7 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:
2008-07-07
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-07
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

48. In situ pottery and tuyere, Ngre Kataa, 2008

Description:
Excavations on the south edge of unit 44N 4W have exposed a cluster of insitu pottery and a tuyere fragment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Foreground, broken pieces of a pottery jar lie with their exterior surfaces facing down. Behind them and left rests a tuyere fragment (NK 08-284), its circular cross-section visible in front of the sign board. To the right (west) of this cluster is an area of dark reddened soil, one of many examples of burned soil in this area where metals were worked. This diffuse area of reddened soil extended underneath the sherd cluster, center photo. To the right, embedded in the balk behind the north arrow (to its south), the tip of a partial iron point (SF 08-159) is visible (right of the circular patch of dark soil). Photo scale in front marked in cm. Arrow pointing north. Site Ngre Kataa. 10 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, 44 N 4W, Level 3
Date:
2008-07-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Tuyere
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

49. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An arc of orange-red burned features is being revealed by excavations in units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the everted jar rim is visible in the north wall, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 16 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170
Date:
2008-07-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

50. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used an an anvil stone (GS 09-03) sits insitu, center photo, in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The surface facing the camera is worn flat and smooth from use. Its upper surface shows depressions created by use. Behind this boulder is a flat grinding stone (GS 09-04) with a very worn upper surface. Another boulder (GS 09-02) is visible left (north). Behind it the pedestal base of a pot is visible along the adjacent unit's southern edge. The moistened soil in front of the sign board marked by two orange pin flags marks the find spot of an iron point (SF 09-033). Photo scale along unit edge measures two meters. Arrow pointing north. Site Ngre Kataa. 30 May 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19089
Provenance:
Ngre Kataa, Mound 6, Unit 48N 2W, Level 4-5
Date:
2009-05-30
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-30
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

51. Burned feature, unit 50N 2W, Ngre Kataa, 2009

Description:
A vertical bank of orange-colored fire-hardened soil abuts a cluster of stones in what archaeologists interpret as a forge feature in a metallurgical workshop. The furnace feature occupied the northwest corner of the excavation unit. In the southern haf of the 2x2 m unit were large boulders used as anvil/grinding stones (GS 09-01 and 09-02). A tree root is visible along the base of the unit's western wall (left). Photo scale by burned feature marked in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Furnaces
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

52. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An area of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Left, back (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units. The everted jar rim visible in the north wall of the excavation (upper right) was part of this wider set (cluster B). The base of these clusters was about 20-30 cm above the burned basins exposed in this photo, which were likely associated with metal forging. Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the north of the burned features (right, foreground), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:
2008-07-17
Location(s) Facet:
8.11277778, -2.30611111
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-17
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111