Search

Start Over Subject(s) metalworking Subject(s) archaeology

1. Excavations at a metal working area, Ngre Kataa, 2009

Description:
Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6
Location(s) Facet:
Ngre Kataa
Subjects:
Workshop; Mound 6
Subjects Facet:
Handicraft; Metallurgy; Archaeology; Metalworking; Forging; Excavations (Archaeology); Iron; Copper alloys
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-27
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

2. Crucible, Kuulo Kataa, 2000

Description:
A crucible used to process copper alloys from Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12. Crucibles like this would have been used to heat copper alloys to a liquid state for use in casting, including casting through a lost-wax process. Scale in cm. Kuulo Kataa, 27 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Handicraft; Metal casting; Metalworking; Copper alloys; Lost wax casting; Archaeology; Lost-wax process; Crucibles; Artifacts (Antiquities)
Identifier:
Catalog number SF-KK-00-229
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2010-08-20
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

3. East wall, unit 130W 26S, Mound 138, Kuulo Kataa, 1995

Description:
A burned basin-like feature is visible in profile in the east wall of excavation unit 130W 26S, Mound 138, Kuulo Kataa. Clustered and adjacent to the burned area at the base of level 7 are three pottery pedestal bases, broken away from their original pots. The presence of slag and other burned features in adjacent units suggest that Mound 138 was a place where the site's occupants worked metals. A photo scale with 5 cm intervals points north. Kuulo Kataa, 14 July, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17575; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17576
Provenance:
Kuulo Kataa, Mound 138, Unit 130W 26S, East Wall
Date:
1995-07-14
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Archaeology; Excavations (archaeology); Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Contributors:
Andrew Black
Date searchable:
1995-07-14
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2019-11-08
People Facet:
Dr. Ann B. Stahl
Commentary:
Slide scanned by Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

4. East wall, unit 130W 26S, Mound 138, Kuulo Kataa, 1995

Description:
A burned basin-like feature is visible in profile in the east wall of excavation unit 130W 26S, Mound 138, Kuulo Kataa. Based on the presence of slag and other burned features in adjacent units, the mound is interpreted as a place where the site's occupants were working metals. A photo scale with 5 cm intervals points north. Kuulo Kataa, 14 July, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17574; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17576
Provenance:
Kuulo Kataa, Mound 138, Unit 130W 26S, East Wall
Date:
1995-07-14
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Archaeology; Excavations (archaeology); Metalworking
Identifier:
3
Creator:
Dr. Ann B. Stahl
Contributors:
Andrew Black
Date searchable:
1995-07-14
Genre Facet:
35 mm slide
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2019-11-08
People Facet:
Dr. Ann B. Stahl
Commentary:
Slide scanned by Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

5. Burned feature, unit 128W 26S, Mound 138, Kuulo Kataa, 1995

Description:
A burned, irregularly shaped basin-like feature exposed in level 3 of unit 128W 26S, Mound 138, Kuulo Kataa. The presence of slag and burned features like this one suggest that Mound 138 was a place where the site's occupants worked metals. Kuulo Kataa, 15 July, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17575; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17574
Provenance:
Kuulo Kataa, Mound 138, Unit 128W 26S, Level 3
Date:
1995-07-15
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Archaeology; Excavations (archaeology); Metalworking
Identifier:
26
Creator:
Dr. Ann B. Stahl
Contributors:
Andrew Black
Date searchable:
1995-07-15
Genre Facet:
35 mm slide
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2019-11-08
People Facet:
Dr. Ann B. Stahl
Commentary:
Slide scanned by Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

6. Burned feature in a metallurgical workshop, Mound 6, Ngre Kataa, 2009

Description:
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17593
Provenance:
Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Burned basin
Subjects Facet:
Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009-06-29
Date searchable:
2009
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

7. Burned feature, unit 50N 4W, Mound 6, Ngre Kataa, 2009

Description:
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17594
Provenance:
Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Burned basin
Subjects Facet:
Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009-06-29
Date searchable:
2009
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

8. In situ grinding stones and pottery, unit 44N 4W, Mound 6, Ngre Kataa, 2008

Description:
Several grinding stones, a whole pot and a cluster of pottery sherds have been exposed in situ at the base of level 3, unit 44N 4W at Mound 6, Ngre Kataa. The large grinding stone in the foreground (grinding stone 1, NK-08-112) is oriented with its grinding surface facing down. Another smaller stone rests on a soil pedestal created as archaeologists excavated surrounding soil to a lower level. Upper right, a whole pottery jar (NK-08-176) sits next to a large grinding stone (grinding stone 3, NK-08-173) oriented with its grinding surface up. To the far left, above the photo scale in centimeters, archaeologists have exposed the edges of a pottery jar, broken in half and lying on its side. As excavations extended into the adjacent unit (42N 4W, to the left), this broken pot was found to be associated with two tuyere fragments. This cluster of grindstones, tuyeres and nearby burned features is interpreted as part of a larger metal-working workshop, the activities of which led to the build up of mound 6. The soil on the right side of the unit is darker because it is moister than that on the left. View to west. Site Ngre Kataa. 1 July, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17601; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, level 3
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Tuyere
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Identifier:
Catalog numbers NK-08-112, 08-176 and 08-173
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-07-01
Date searchable:
2008
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

9. In situ pottery and grinding stones, unit 42N 4W, Ngre Kataa, 2008

Description:
Excavations in unit 42N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at Mound 6, Ngre Kataa. Foreground, left, a grinding stone (GS 08-10) rests with its working surface face down. It sits at a slightly higher level than a nearby (left) whole pottery jar (NK 08-406). To the right of these, a partial pot (NK 08-282) and a tuyere fragment (NK 08-284) are clustered together with two halves of a broken pottery jar, lying with its exterior surface facing down. To the south (behind), near the sign board and framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Another partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12) have been exposed to the left of the sign board at 77 cm below the unit's datum. The narrow dark bands visible in the soil are the traces of animal burrows. Photo scale adjacent to the sign board in centimeters. View looking south. Site Ngre Kataa. 7 July 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19136; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19177; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:
Ngre Kataa, Mound 6, unit 42N 4W
Date:
2008-07-07
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Burned basin; Tuyere
Subjects Facet:
Archaeology; Excavations (Archaeology); Handicrafts; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-07-07
Date searchable:
2008
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

10. Excavation units at Mound 148, Kuulo Kataa, 2000

Description:
In-progress excavations of adjacent 2 x 2 m units at Mound 148, Kuulo Kataa. The base of units 70E 48-52N and 72E 50N have been excavated to depths ranging from 90-110 cm below datum. The large area of dark soil concentrated in unit 70E 50N (center) is intrusive pit fill which cut through the living surface at this mound level. An area of packed reddish-orange laterite gravel in unit 70E 52N (bottom, left) likely represents a prepared floor surface. To the right of the dark pit soil, in the boundary between units 70E 50N and 70E 48N, is a an irregularly shaped burned feature interpreted by archaeologists as likely associated with metalworking. Two radiocarbon samples associated with this burned feature had calibrated age ranges between c.1200-1400 CE. A cluster of hearth stones has been exposed in nearby unit 72E 50N (center photo). White bags filled with soil samples collected for flotation sit outside the excavated area together with excavation equipment. View looking eastwards. Kuulo Kataa, 11 July, 2000.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 148
Date:
2000-07-11
Location(s) Facet:
Kuulo Kataa
Subjects:
Floors; Pits
Subjects Facet:
Archaeology; Excavations (Archaeology); Metalworking
Identifier:
16
Creator:
Dr. Ann B. Stahl
Contributors:
Alex Caton
Date searchable:
2000-07-11
Date searchable:
2000
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2019-11-08
People Facet:
Dr. Ann B. Stahl
Commentary:
Slide scanned by Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

11. North wall, unit 46N 2W, Mound 6, Ngre Kataa, 2009

Description:
The mouth of a perforated shrine pot (left) is covered with the pedestaled base of another pot. It remains in situ as the surrounding areas of unit 46N 2W are excavated to lower levels. Behind, the stratified layers of Mound 6 are visible in the unit's north wall. Center (back) are a series of anvil and grinding stones exposed at higher mound levels in other excavation units. During excavations in 2008, a cluster of four anvil/grinding stones was found at a level slightly higher than but adjacent (left/west) to the perforated pot. At right, in lower levels, two grinding stones rest at an angle in association with a burned feature. Archaeologists interpret Mound 6 as a metallurgical workshop at which stratified levels built up through repeated use of the same location. Photo scale in centimeters. Site Ngre Kataa. 2 July, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19131
Provenance:
Ngre Kataa, Mound 6, unit 46N 2W
Date:
2009-07-02
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Stratigraphy
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009-07-02
Date searchable:
2009
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

12. Grinding stone, Mound 6, Ngre Kataa, 2008

Description:
A deeply worn grinding stone (grindstone 1, NK-08-112) removed from levels 1-2, unit 44N 4W, Mound 6, Ngre Kataa, photographed at the side of the excavation unit. The grinding stone was found in association with other grinding stones, tuyere fragments and whole and partial pots. When found, the grinding stone was oriented with its working surface facing downward. It was located adjacent to a concentration of dark soil (feature 1) that contained abundant oxidized sediment, slag and broken pottery. Archaeologists interpret the features at Mound 6 as facilities used to make and process metals. Photo scale in 5 centimeter increments. Ngre Kataa, 2 July, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17602
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, levels 1-2
Date:
2008-07-02
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-07-02
Date searchable:
2008
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

13. Drawing a plan map, Mound 6, Ngre Kataa, 2008

Description:
Banda Research Project team members Amanda Logan (right) and Amy Groleau (left) draw a plan map of units 44N 4W and 44N 6W, Mound 6, Ngre Kataa. They map in situ artifacts and features, including several large grinding stones, a whole pot, pottery clusters and a tuyere fragment. Wooden stakes mark the corners of 2 x 2 meter excavation units. A photo scale place near a partially exposed everted rim jar in unit 44N 6W (NK-08-407) is in 5 centimeter increments. Ngre Kataa, 7 July, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6
Date:
2008-07-07
Location(s) Facet:
Ngre Kataa
Subjects:
Mapping; Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-07-07
Date searchable:
2008
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

14. Large slag nodule, Ngre Kataa, Mound 8, 2008

Description:
Iron slag is formed as a byproduct of iron smelting. Here a large slag nodule has broken in half, revealing its interior texture. At the archaeological site of Ngre Kataa, large chunks of 'bubbly' slag like this were occasionally found in household and other contexts, away from areas otherwise associated with metal-working activities. Potters at the time of the site's occupation had begun to use crushed iron slag as a tempering agent in their potting clays, which may explain why large nodules were being carried and cached in areas away from metal-working locations. Ngre Kataa, June, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 3
Date:
2008-06-23
Location(s) Facet:
Ngre Kataa
Subjects:
Slag
Subjects Facet:
Archaeology; Metalworking; Metallurgy; Pottery making; Artifacts (Antiquities)
Identifier:
NK08-027
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

15. Large slag nodule, Ngre Kataa, Mound 8, 2008

Description:
Iron slag is formed as a byproduct of iron smelting. Here a large slag nodule has broken in half, revealing its interior texture. At the archaeological site of Ngre Kataa, large chunks of 'bubbly' slag like this were occasionally found in household and other contexts, away from areas otherwise associated with metal-working activities. Potters at the time of the site's occupation had begun to use crushed iron slag as a tempering agent in their potting clays, which may explain why large nodules were being carried and cached in areas away from metal-working locations. Ngre Kataa, June, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 3
Date:
2008-06-23
Location(s) Facet:
Ngre Kataa
Subjects:
Slag
Subjects Facet:
Archaeology; Metalworking; Metallurgy; Pottery making; Artifacts (Antiquities)
Identifier:
NK08-027
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-06-23
Date searchable:
2008
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

16. Burned features, unit 46N 2W, Ngre Kataa, 2009

Description:
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

17. Burned features unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned features is exposed in the northwest corner of excavation unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). Along the unit's west wall (left in photo) is an amorphous zone of fire-hardened red (Munsell color 2.5YR 3/6) matrix. A piece of brass bar (SF NK 09-293) was found in soil associated with this burned feature. Above and to the right (northeast), two circular burned features are visible in outline. These basin-shaped features had a thin lining of fire-hardened sediment, red to dark red (Munsell 2.5 YR 3/6 & 4/8) in color. The basins were filled with loose ashy sediment and small pieces of charcoal. A sample of burned matrix from feature 1 (top right basin) yielded a thermoluminescence (TL) age estimate of 1500 +/- 40 CE (Univ. Wash. 2455). Further excavation revealed additional basin-shaped features beneath the amorphous burned feature. The excavation unit's northwest corner peg is visible, upper left. View looking north. Site Ngre Kataa. 27 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19109; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19111
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-27
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-07
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

18. Excavated burned basins, unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned basin-shaped features is exposed in the northwest corner of unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). The basins comprised a thin layer of fire-hardened sediment, red to dark red (Munsell colors 2.5 YR 3/6 & 4/8) in color. Basin features 1 (top right) and 2 (left of feature 1) measured about 8-9 cm deep and were filled with ashy soil. Basin feature 5 (far left) was shallower. Its fire-hardened surface showed a pinkish tinge. Samples of burned basin matrix from features 1 and 5 yielded thermoluminescence (TL) age estimates of 1500 +/- 40 CE (feature 1; Univ. Wash. 2455) and 1580 +/- 40 CE (feature 5; Univ. Wash. 2456). Photo bar marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 29 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-29
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

19. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:
Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:
2009-06-23
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

20. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:
Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:
2009-06-23
Location(s) Facet:
8.11277778, -2.30611111
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111