A group of four clay jars cool after being removed from the bonfire and dipped in bark solution. The solution carbonizes as it comes in contact with the hot surface of the pot, creating a glossy darkened surface that reduces the jar's porosity. A portion of one jar's rim has broken off during the firing and finishing process. Visible on the lower pot surfaces is the maize cob (bledjukaan in Nafaanra) roulette applied to create a roughened surface prior to firing. Shallow grooves used to decorate the upper surfaces are visible on the jar in the foreground. Pieces of bark from the bark solution adhere to the jars' surfaces. Bondakile, October, 1982.
Finished and dried clay pottery jars are carefully placed on top of firewood in preparation for firing. Previously fired broken or flawed pots are used to bank the fuel, keeping it in place. Additional fuel will be placed on top of the stacked pottery and the fuel set on fire. The resulting bonfire will be allowed to burn down, after which the pots will be removed and finished while hot by being dipped in a bark solution. Mensah Listowell, Research Assistant (blue shirt), stands by as the potters prepare to place more fuel on the stacked pottery. Bondakile, October, 1982.
A potter uses a pole to carry a hot clay jar from the smoldering bonfire (behind). She is carrying it to a pottery bowl that contains a solution of pounded bark into which she will dip the jar to create a finish. Newly fired pots are visible in the remains of the bonfire, lying on their sides. A row of upturned, previously fired but broken pots forms a bank around the bonfire's edge. Bondakile, October, 1982.
Potters place the pounded bark of specific trees (surom, layene, koko or lakroas they are known in Nafaanra) in water to create a solution used to finish pots. The red-colored solution carbonizes on the surface of hot pots just removed from the bonfire. Here, the prepared solution awaits as the pots are being fired. A plastic container floats on the surface. Bondakile, October, 1982.
Clay pots that have been fired and finished by dipping in a bark solution cool as a group looks on. To the right, a woman is dipping a clay pot just removed from the fire in a bark solution contained within a large metal cooking pot. She uses a long pole to turn the pot. The bark solution carbonizes as it comes in contact with the hot clay surface, creating a darkened sheen, as on the pots to the left. From left, Vida, Enoch Mensah (research assistant, blue shirt) and Obimpeh. Center and right, Yaa Sunyani (blue head scarf) Akua Kpͻͻ and Yaa Kpͻͻ (pink top). In the background (right) a fenced kitchen garden is visible. Adadiem, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Adadiem
Subjects:
Potting; Metal pots; Finishing; Soup pots (sro cho); Headpan
A potter tends the bonfire in which clay pottery jars are being fired. She uses a long pole to adjust the grass fuel laid on top of the pots and the wood fuel beneath them. A bank of previously fired and broken pots holds the fire in place. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
The remains of a pottery-firing bonfire after the newly fired pots have been removed. Most of the jars visible here were fired prior to this bonfire. Broken or otherwise flawed, they were used to create a bank around the bonfire at its base. The bonfire's fuel has been reduced to an ash layer that remains in the center. Bondakile, October, 1982.
Sheep feed on the edges of a bonfire where clay jars are being fired. Grass has been laid as fuel over the carefully stacked pottery. Wood fuel lies beneath. At the bonfire's base, the broken pots used to bank the fire are visible. The fire will be allowed to burn down, after which the jars will be removed and, while still hot, dipped in a bark solution that coats the pot with a finish. Bondakile, October, 1982.
Fired, blackened clay grinding bowls are stacked (center). While hot from the fire, the bowls have been blackened by rolling them in dry grass or peanut shells. To the right, a bonfire firing is in progress. The outside perimeter of the fire is banked with previously fired but broken jars. To the left, a large clay bowl contains a bark solution into which the pots are dipped while still hot from the fire. Behind that, another bonfire burns. To the right (back, center) pots have been stacked in preparation for another bonfire firing. The fashion of blackening grinding bowls began in the Banda area sometime during the 20th century. Adadiem, 1994.
Dried clay jars are carefully placed on top of firewood in preparation for firing. Their surfaces have been textured by rolling a maize cob (bledjukaan in Nafaanra) over the jars' lower surface (maize cob roulette) and decorated with shallow arched grooves made when the pot was in a leather-hard state. Additional fuel will be placed on top of the stacked pottery before the fire is lit. After the fire has burned down the pots will be removed and finished by being dipped while hot in a bark solution. Bondakile, October, 1982.
As the bonfire burns down, a helper uses a long pole to prepare the newly fired clay pots for removal. The neatly stacked pots lie on their sides. Around the edges, a bank of previously fired and broken pots, some turned upside-down, were used to hold the fuel and pots in place as the bonfire was built. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
With moistened hands, a standing potter smooths the rim of a partially finished clay jar. As she works, she moves clockwise around the wooden stump that supports the palette (kpankpa in Nafaanra) on which the pot is being molded. Bondakile, October, 1982.
A potter uses a draw-and-drag (direct pull) technique as she begins to mold the body and rim of a pottery jar from a lump of moist clay. The clay rests on a palette (kpankpa in Nafaanra) supported by a stump. She moves clockwise around the stump as she uses her hands to pull the clay upward and outward to form the walls of the pot. Bondakile, October, 1982.
Adwoa Miwo (right) learns to make clay pots from her experienced potter mother, Peni Ngunu Chͻ (center), as they work together in the interior courtyard of their house. Mosi Nyuu (husband and father) looks on. Partially finished clay jars sit nearby, resting on the palettes (kapankpa in Nafaanra) on which they have been formed. The more experienced mother is making a larger jar than her apprentice daughter. Also placed around the house's interior courtyard are two dark-colored clay soup pots (chiin sinyjͻlͻ in Nafaanra) and a wooden mortar (right). Thatch- and metal-roofed rooms surround the courtyard. Dorbour, 1994.
This short Banda Heritage video made from still photographic images illustrates the potting techniques of Banda-area potters. It highlights the steps in their draw-and-drag forming method and the tools they use. Among the Nafana potters pictured in the video are Yaa Tenabrɛ, Adwoa Fodjoa, Peni Krah and Ama Donkor from Dorbour. Also pictured is a potter from Adadiem (1994) and an image from Bondakile (1982). Original images used to make the video are available in the Banda Heritage Repository. Dorbour, Adadiem, 1994. Bondakile 1982. Length: 5.05 minutes.
This short video made from still photographic images illustrates the firing techniques of Banda-area potters. It shows examples of bonfire firing and post-firing treatment of vessels in a solution of pounded bark. Images include a 1982 sequence following Mo potters in Bondakile and 1994 images of Nafana potters in Adadiem and Dorbour, featuring Afua Donkor and Yaa Nsiah Adiemu from the latter. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Adadiem, Dorbour, 1994. Length: 4.22 minutes.
A potter sits on a stool as she molds the upper body of a clay water jar (chͻkoo in Nafaanra). In her right hand she uses a maize cob (bledjukaan in Nafaanra), pulling it against the exterior surface to smooth and thin the clay. In the foreground are water jars whose leather-hard upper body and rim have been joined to a rounded base, their clay bases still moist and not yet smoothed. Large wooden mortars and a headpan containing moist clay sit nearby as she works in the shade of an open-sided room. Dorbour, 1994.
Afua Donkor, a Nafana potter, uses a pestle to pound bark that will be used to make a solution to finish clay pots. In a nearby headpan, more stripped bark awaits pounding. After pounding, the bark will be soaked in water. Hot clay pots just removed from the bonfire will be dipped and turned in the solution. This colors the pots and is said to reduce their porosity. She sits on a stool as she works in the courtyard near a hearth. Nearby is a large metal cooking pot, several wooden mortars and a number of pestles. Finished clay soup cooking pots (chiin sinyjͻlͻ in Nafaanra) sit behind her ready for sale. Dorbour, 1994.
Akua Donkor, a Nafana potter, etches grooves onto the leather-hard surface of a clay cooking pot (sro chͻ in Nafaanra) before it is fired. The lower part of the jar has been surface treated using a maize cob (bledjukaan in Nafaanra) as a roulette. This gives the pot surface texture, over which the grooved design is made. She wears bracelets that sometimes double as tools to decorate pots. Dorbour, 1994.
Yaa Tenabrԑ, a Nafana potter, sits on a wooden stool as she scapes the interior of a large clay pot. A metal bucket containing moist clay covered in plastic sits nearby. A well-worn grinding stone is visible at the top of the photo, on top of which rests a pink plastic cup. A small clay bowl filled with water sits next to it. The blue headpan to the right can no longer be used to carry things, but it remains useful as a support or stand for other things like round-based water storage pots. Dorbour, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Dorbour
Subjects:
Forming; Women's work; Potting; Plastic containers; Dorbour; Headpans; Metal buckets; Grinding stone
A standing potter bends over as she begins to pull a clay lump upwards and outwards, using a draw-and-drag (direct pull) technique to form the walls of a clay pot. The clay rests on a metal plate (kpankpa in Nafaanra) which allows her to move the pot aside to dry once its body and rim are formed. Once dry, she will add a rounded base. The finger marks visible at this stage of the pot's forming show the direction in which she pulls the clay as she works. Adadiem, 1994.
A seated Nafana potter uses her hands to mold the sides of a clay pot. Beginning with a lump of clay placed on a round palette (kpankpa in Nafaanra), she has used a draw-and-drag (direct pull) technique to form the pot. Nearby are the enamel ware plates that she uses as palettes or turntables on which to form pots. Another partially shaped pot is visible at the top of the photo. Dorbour, 1994.
A potter seated on the ground starts to form a clay pot. She begins with a lump of clay resting on a metal plate (kpankpa in Nafaanra) which she can turn as she uses a draw-and-drag (direct pull) technique to shape the pot. A second lump of clay has already begun to be formed (lower left) and a clay bowl contains water that she uses to moisten the clay as needed (lower right). Lying on the metal plates to the left are tools that she will use as she forms the pot including two maize cobs, a spatula and a stone. Dorbour, 1994.
Yaa Tenabrԑ, a Nafana potter, stands as she uses a spatula-like tool to smooth and thin the walls of a large clay pot which she is molding. She has shaped the pot using a draw-and-drag (direct pull) technique, beginning with a lump of clay and using her hands to draw the clay upwards and outwards. The pot rests on a round metal plate (kpankpa in Nafaanra) that can be turned on the stump on which it sits and on which the pot can be moved and set aside as it dries. Dorbour, 1994.
Adwoa Fodjoa, a Nafana potter, sits on a wooden stool as she thins the inside walls of a clay water pot (chͻkoo in Nafaanra). The pot has been formed and set aside to dry before the potter thins its walls. The round-based pot rests on a cloth as she works. Other water pots on which she is working sit near her, turned upside down. A metal plate that she uses as a palette (kpankpa in Nafaanra) on which to form pots sits by her foot. The clay jar in front of the pot on which she is working contains the water she uses to moisten the pot as needed. A tray with lumps of clay and two enamel ware pots sit nearby. Dorbour, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Dorbour
Subjects:
Forming; Women's work; Potting; Dorbour; Water pots (chokoo)
Ma Fiԑn of Gbao (left) and Abena Wusu of Dompofie (right) spin cotton thread. Their spindles (gԑndԑ in Nafaanra) are weighted by fired clay spindle whorls (gԑndԑ kaan in Nafaanra) which help the spindle to maintain an even spin. Ma Fiԑn uses a calabash bowl as a spinning surface. Abena Wusu uses an enamel-ware bowl placed on a basket. They use their right hand to guide thread onto the spindle as it spins. In their left hand they hold the raw cotton from which the thread is being spun. They control the tension and flow of the cotton by alternately pulling back and easing their left hands. Thread forms as the spindle spins, with the finished product building up in layers toward the spindle's lower end, near the whorl. The baskets on top of which they spin used to store spinning equipment when not in use. Until recent decades, spinning was a routine household activity for women who then gave thread to men skilled in weaving to make cloth for the household. Spindle whorls found on archaeological sites dating to the late 18th and 19th centuries tell us that spinning was also a household activity during those centuries. In the photo's background harvested foods are drying (groundnut, cassava, chili pepper). A large basket and other containers (including a plastic tub) sit next to dried calabash ready to be sent to market. To the right, a clay water pot (chͻkoo in Nafaanra) rests on a metal basin and in the top right is a metal water barrel. Four photos. Gbao, September, 1982.
An educational poster with pictures and text which describes Banda-area village life from the 15th through the 17th centuries. It briefly summarizes what has been learned from archaeological excavations at Kuulo Kataa about metal working. It also outlines the use of wild and domestic animals and the new objects and practices that developed in this time when trade connections with the Niger River area were strong. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text which describes Banda-area village life during the 13th to the 15th centuries. It briefly summarizes what has been learned from archaeological excavations about handicrafts at Ngre Kataa including metal working and pottery making. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are available in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text which describes Banda-area village life during the 18th and 19th centuries based on oral histories, written sources and archaeology. It describes early written references to Banda and briefly summarizes what has been learned about handicrafts like potting and cloth-making based on archaeological excavations at Makala Kataa. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text focused on how past people in the Banda area clothed their families. It describes how people dressed, how they made cotton cloth, and why cloth is no longer made in Banda. It is one of five posters prepared for a Banda community event held in 2014. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
Unfinished clay grinding bowls dry on the palettes (kpankpa in Nafaanra) on which they were formed. After they have dried to a leather-hard state, the potter will remove them from their palettes and score their interiors. The scoring creates a grinding surface used to process vegetables which are added to soups. These bowls may also serve as men's eating bowls (pԑԑ in Nafaanra). Immediately behind the drying bowls is a hearth, swept clean of ashes. Pottery jars can be seen drying in background, right. A chicken forages nearby. Bondakile, October, 1982.
A standing potter puts the finishing touches on the rim of a clay jar that she has molded using a draw-and-drag (direct pull) technique. She has finished the body, neck and rim of the jar and will now set it aside to dry. After it has dried to a leather-hard state, she will remove the jar from the palette (kpankpa in Nafaanra) on which it has been formed and she will add a rounded base. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. As she began she drew the moist clay upward and outward from the lump with which she started. Here she shapes the jar's neck and outward flaring rim. Before doing so, she has smoothed away finger marks created as she formed the jar's body. As she works, she moves around the stump that supports the palette on which the jar is being formed. Bondakile, October, 1982.
A potter has completed the draw-and-drag (direct pull) molding of a clay jar body and rim. The surface of the jar has been moistened and smoothed. It will be set aside to dry. Once it has dried to a leather-hard state, she will remove the partially finished jar from the palette (kpankpa in Nafaanra) on which she formed it and will add a rounded base using fresh, moist clay. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she has drawn the clay upward and outward with her hands. Here she begins to shape the form of the jar's neck and outward-flaring rim. As she works, she moves backwards around the stump that supports the palette (kpankpa in Nafaanra) on which the jar is being formed. Bondakile, October, 1982.
A basketry fish trap (exa in Ewe) made and used by Ewe fishermen in the Banda area, Ghana. Traps like these were used for fishing between the months of August and November. They were effective in catching different types of fish three inches in length or longer. Agbegikrom South, December, 1982.
A potter uses a metal spatula as she forms the neck area of clay jar which she has shaped using a draw-and-drag (direct pull) technique. The striations on the body of the jar were created by a maize cob (bledjukaan in Nafaanra) which she used to shape and smooth the pot's wall. These will be smoothed away as she continues to form the pot. She moves around the stump on which the pot rests as she works. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she draws the clay upward and outward from the center as she moves clockwise around the stump that holds the movable palette (kpankpa in Nafaanra) on which the jar is being formed. The fingermarks left as she pulls and thins the clay will be smoothed over as she continues to shape the jar. Bondakile, October, 1982.
A potter uses a maize cob (bledjukaan in Nafaanra) to smooth the surface of clay jar body that she is molding by a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she has drawn the clay upward and outward, thinning the walls as she works. Here she moves clockwise around the stump that holds the palette (kpankpa in Nafaanra) on which the jar is being formed as she draws the maize cob up, pulling it towards her body. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Here she uses a flat metal spatula to smooth the now-formed jar's exterior surface. She places the edge of her tool at the neck and makes downward strokes to create a smooth surface on the moist clay. As she works, she moves around the stump that supports the palette (kpankpa in Nafaanra) on which the jar is being formed. Bondakile, October, 1982.
A woman stacks clay grinding bowls on top of wood in preparation for a bonfire firing. The bowls are placed to ensure even exposure to the heat of the bonfire. She will place additional fuel on top of the bowls before lighting the fire. Adadiem, 1994.
A potter completes decorations on a clay cooking pot (sro chͻ in Nafaanra). Another pot sits nearby, turned upside down. The lower bodies of the pots have been surface treated by rolling a maize cob (bledjukaan in Nafaanra) across the leather-dry surface of the clay jar. Shallow grooved lines have been etched over top. The clay jars are now ready to be fired. Dorbour, 1994.
A group of unfired clay pots to which red slip (chuma in Nafaanra) has been applied prior to firing. The string of Babobab tree seeds (foreground) is used to burnish the slip. By rubbing the dried slip vigorously with the seeds, the slip adheres to the surface and becomes shiny. To the right rear are several unfired clay eating bowls (kpokpoo in Nafaanra). Dorbour, 1994.
Ten clay cooking pots (sro chͻ in Nafaanra) have been placed upside down on a bed of firewood in preparation for a bonfire that will fire the clay pots. These pots have been red-slipped (chuma in Nafaanra) before firing. In the background is the bark that will be used to cover and surround the pottery before the bonfire is lit. Once lit, the fire burns for beween 30 minutes and an hour, after which the clay jars will be useable and ready for sale. Dorbour, 1994.
A potter uses a metal bracelet as a roulette to make shallow grooves on the leather-hard surface of a cooking pot (sro chͻ in Nafaanra). She rolls the bracelet across a surface that has been textured using a maize cob (bledjukaan in Nafaanra) roulette. Next she will make shallow grooves along the boundary between the smooth upper body of the jar and the maize cob-routletted lower areas. Dorbour, 1994.
Akua Donkor, a Nafana potter, uses a rounded-edged tool to make shallow grooves on the upper body of a soup pot (chiin sinyjͻlͻ in Nafaanra). The clay pot has been allowed to dry to a leather-hard state before the decorations are applied. She has used a maize cob (bledjukaan in Nafaanra) as a roulette (roller) to surface treat the base of the clay pot. A single grooved line sets the maize cob rouletted zone from the smoothed surface above it. The woman wears bracelets that can double as tools for decorating pots. Dorbour, 1994.
A number of large and medium-sized clay jars have been placed upside down on a bed of fire wood in preparation for a bonfire firing. Several previously fired and broken clay pots together with large stones are used to bank the edges of the stacked firewood. More firewood is stacked behind the bonfire area. Adadiem, 1994.
Small clay eating bowls like this one (kpokpoo in Nafaanra) were typically used by women. This one has been blackened after a fashion that became popular in the 20th century. Similar bowls are found on archaeological sites around the Banda area, though often with a flat, pedestaled base and seldom blackened. Dorbour, 1994.
Afua Donkor, a Nafana potter, inspects clay jars of various shapes and sizes that await firing. The liquid red slip (chuma in Nafaanra) has been applied, allowed to dry and then burnished in prepartion for firing. Visible around the courtyard are wooden mortars, a pestle and a metal cooking pot. Thatch-roofed rooms surround the courtyard. Dorbour, 1994.
Peni Krah, a Nafana potter, sits on the ground and uses her left hand to turn the palette (kpankpa in Nafaanra) on which she has molded a clay soup pot (chiin sinyjͻlͻ in Nafaanra), smoothing its rim with a moist cloth held in her right hand. The headpan to her right contains moist clay. Dorbour, 1994.