A group of four clay jars cool after being removed from the bonfire and dipped in bark solution. The solution carbonizes as it comes in contact with the hot surface of the pot, creating a glossy darkened surface that reduces the jar's porosity. A portion of one jar's rim has broken off during the firing and finishing process. Visible on the lower pot surfaces is the maize cob (bledjukaan in Nafaanra) roulette applied to create a roughened surface prior to firing. Shallow grooves used to decorate the upper surfaces are visible on the jar in the foreground. Pieces of bark from the bark solution adhere to the jars' surfaces. Bondakile, October, 1982.
Finished and dried clay pottery jars are carefully placed on top of firewood in preparation for firing. Previously fired broken or flawed pots are used to bank the fuel, keeping it in place. Additional fuel will be placed on top of the stacked pottery and the fuel set on fire. The resulting bonfire will be allowed to burn down, after which the pots will be removed and finished while hot by being dipped in a bark solution. Mensah Listowell, Research Assistant (blue shirt), stands by as the potters prepare to place more fuel on the stacked pottery. Bondakile, October, 1982.
A potter uses a pole to carry a hot clay jar from the smoldering bonfire (behind). She is carrying it to a pottery bowl that contains a solution of pounded bark into which she will dip the jar to create a finish. Newly fired pots are visible in the remains of the bonfire, lying on their sides. A row of upturned, previously fired but broken pots forms a bank around the bonfire's edge. Bondakile, October, 1982.
Potters place the pounded bark of specific trees (surom, layene, koko or lakroas they are known in Nafaanra) in water to create a solution used to finish pots. The red-colored solution carbonizes on the surface of hot pots just removed from the bonfire. Here, the prepared solution awaits as the pots are being fired. A plastic container floats on the surface. Bondakile, October, 1982.
Clay pots that have been fired and finished by dipping in a bark solution cool as a group looks on. To the right, a woman is dipping a clay pot just removed from the fire in a bark solution contained within a large metal cooking pot. She uses a long pole to turn the pot. The bark solution carbonizes as it comes in contact with the hot clay surface, creating a darkened sheen, as on the pots to the left. From left, Vida, Enoch Mensah (research assistant, blue shirt) and Obimpeh. Center and right, Yaa Sunyani (blue head scarf) Akua Kpͻͻ and Yaa Kpͻͻ (pink top). In the background (right) a fenced kitchen garden is visible. Adadiem, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Adadiem
Subjects:
Potting; Metal pots; Finishing; Soup pots (sro cho); Headpan
A potter tends the bonfire in which clay pottery jars are being fired. She uses a long pole to adjust the grass fuel laid on top of the pots and the wood fuel beneath them. A bank of previously fired and broken pots holds the fire in place. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
The remains of a pottery-firing bonfire after the newly fired pots have been removed. Most of the jars visible here were fired prior to this bonfire. Broken or otherwise flawed, they were used to create a bank around the bonfire at its base. The bonfire's fuel has been reduced to an ash layer that remains in the center. Bondakile, October, 1982.
Sheep feed on the edges of a bonfire where clay jars are being fired. Grass has been laid as fuel over the carefully stacked pottery. Wood fuel lies beneath. At the bonfire's base, the broken pots used to bank the fire are visible. The fire will be allowed to burn down, after which the jars will be removed and, while still hot, dipped in a bark solution that coats the pot with a finish. Bondakile, October, 1982.
Fired, blackened clay grinding bowls are stacked (center). While hot from the fire, the bowls have been blackened by rolling them in dry grass or peanut shells. To the right, a bonfire firing is in progress. The outside perimeter of the fire is banked with previously fired but broken jars. To the left, a large clay bowl contains a bark solution into which the pots are dipped while still hot from the fire. Behind that, another bonfire burns. To the right (back, center) pots have been stacked in preparation for another bonfire firing. The fashion of blackening grinding bowls began in the Banda area sometime during the 20th century. Adadiem, 1994.
Dried clay jars are carefully placed on top of firewood in preparation for firing. Their surfaces have been textured by rolling a maize cob (bledjukaan in Nafaanra) over the jars' lower surface (maize cob roulette) and decorated with shallow arched grooves made when the pot was in a leather-hard state. Additional fuel will be placed on top of the stacked pottery before the fire is lit. After the fire has burned down the pots will be removed and finished by being dipped while hot in a bark solution. Bondakile, October, 1982.
As the bonfire burns down, a helper uses a long pole to prepare the newly fired clay pots for removal. The neatly stacked pots lie on their sides. Around the edges, a bank of previously fired and broken pots, some turned upside-down, were used to hold the fuel and pots in place as the bonfire was built. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
With moistened hands, a standing potter smooths the rim of a partially finished clay jar. As she works, she moves clockwise around the wooden stump that supports the palette (kpankpa in Nafaanra) on which the pot is being molded. Bondakile, October, 1982.
A potter uses a draw-and-drag (direct pull) technique as she begins to mold the body and rim of a pottery jar from a lump of moist clay. The clay rests on a palette (kpankpa in Nafaanra) supported by a stump. She moves clockwise around the stump as she uses her hands to pull the clay upward and outward to form the walls of the pot. Bondakile, October, 1982.
Adwoa Miwo (right) learns to make clay pots from her experienced potter mother, Peni Ngunu Chͻ (center), as they work together in the interior courtyard of their house. Mosi Nyuu (husband and father) looks on. Partially finished clay jars sit nearby, resting on the palettes (kapankpa in Nafaanra) on which they have been formed. The more experienced mother is making a larger jar than her apprentice daughter. Also placed around the house's interior courtyard are two dark-colored clay soup pots (chiin sinyjͻlͻ in Nafaanra) and a wooden mortar (right). Thatch- and metal-roofed rooms surround the courtyard. Dorbour, 1994.
This short Banda Heritage video made from still photographic images illustrates the potting techniques of Banda-area potters. It highlights the steps in their draw-and-drag forming method and the tools they use. Among the Nafana potters pictured in the video are Yaa Tenabrɛ, Adwoa Fodjoa, Peni Krah and Ama Donkor from Dorbour. Also pictured is a potter from Adadiem (1994) and an image from Bondakile (1982). Original images used to make the video are available in the Banda Heritage Repository. Dorbour, Adadiem, 1994. Bondakile 1982. Length: 5.05 minutes.
This short video made from still photographic images illustrates the firing techniques of Banda-area potters. It shows examples of bonfire firing and post-firing treatment of vessels in a solution of pounded bark. Images include a 1982 sequence following Mo potters in Bondakile and 1994 images of Nafana potters in Adadiem and Dorbour, featuring Afua Donkor and Yaa Nsiah Adiemu from the latter. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Adadiem, Dorbour, 1994. Length: 4.22 minutes.
A potter sits on a stool as she molds the upper body of a clay water jar (chͻkoo in Nafaanra). In her right hand she uses a maize cob (bledjukaan in Nafaanra), pulling it against the exterior surface to smooth and thin the clay. In the foreground are water jars whose leather-hard upper body and rim have been joined to a rounded base, their clay bases still moist and not yet smoothed. Large wooden mortars and a headpan containing moist clay sit nearby as she works in the shade of an open-sided room. Dorbour, 1994.
Afua Donkor, a Nafana potter, uses a pestle to pound bark that will be used to make a solution to finish clay pots. In a nearby headpan, more stripped bark awaits pounding. After pounding, the bark will be soaked in water. Hot clay pots just removed from the bonfire will be dipped and turned in the solution. This colors the pots and is said to reduce their porosity. She sits on a stool as she works in the courtyard near a hearth. Nearby is a large metal cooking pot, several wooden mortars and a number of pestles. Finished clay soup cooking pots (chiin sinyjͻlͻ in Nafaanra) sit behind her ready for sale. Dorbour, 1994.
Akua Donkor, a Nafana potter, etches grooves onto the leather-hard surface of a clay cooking pot (sro chͻ in Nafaanra) before it is fired. The lower part of the jar has been surface treated using a maize cob (bledjukaan in Nafaanra) as a roulette. This gives the pot surface texture, over which the grooved design is made. She wears bracelets that sometimes double as tools to decorate pots. Dorbour, 1994.
Yaa Tenabrԑ, a Nafana potter, sits on a wooden stool as she scapes the interior of a large clay pot. A metal bucket containing moist clay covered in plastic sits nearby. A well-worn grinding stone is visible at the top of the photo, on top of which rests a pink plastic cup. A small clay bowl filled with water sits next to it. The blue headpan to the right can no longer be used to carry things, but it remains useful as a support or stand for other things like round-based water storage pots. Dorbour, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Dorbour
Subjects:
Forming; Women's work; Potting; Plastic containers; Dorbour; Headpans; Metal buckets; Grinding stone
A standing potter bends over as she begins to pull a clay lump upwards and outwards, using a draw-and-drag (direct pull) technique to form the walls of a clay pot. The clay rests on a metal plate (kpankpa in Nafaanra) which allows her to move the pot aside to dry once its body and rim are formed. Once dry, she will add a rounded base. The finger marks visible at this stage of the pot's forming show the direction in which she pulls the clay as she works. Adadiem, 1994.
A seated Nafana potter uses her hands to mold the sides of a clay pot. Beginning with a lump of clay placed on a round palette (kpankpa in Nafaanra), she has used a draw-and-drag (direct pull) technique to form the pot. Nearby are the enamel ware plates that she uses as palettes or turntables on which to form pots. Another partially shaped pot is visible at the top of the photo. Dorbour, 1994.
A potter seated on the ground starts to form a clay pot. She begins with a lump of clay resting on a metal plate (kpankpa in Nafaanra) which she can turn as she uses a draw-and-drag (direct pull) technique to shape the pot. A second lump of clay has already begun to be formed (lower left) and a clay bowl contains water that she uses to moisten the clay as needed (lower right). Lying on the metal plates to the left are tools that she will use as she forms the pot including two maize cobs, a spatula and a stone. Dorbour, 1994.
Yaa Tenabrԑ, a Nafana potter, stands as she uses a spatula-like tool to smooth and thin the walls of a large clay pot which she is molding. She has shaped the pot using a draw-and-drag (direct pull) technique, beginning with a lump of clay and using her hands to draw the clay upwards and outwards. The pot rests on a round metal plate (kpankpa in Nafaanra) that can be turned on the stump on which it sits and on which the pot can be moved and set aside as it dries. Dorbour, 1994.
Adwoa Fodjoa, a Nafana potter, sits on a wooden stool as she thins the inside walls of a clay water pot (chͻkoo in Nafaanra). The pot has been formed and set aside to dry before the potter thins its walls. The round-based pot rests on a cloth as she works. Other water pots on which she is working sit near her, turned upside down. A metal plate that she uses as a palette (kpankpa in Nafaanra) on which to form pots sits by her foot. The clay jar in front of the pot on which she is working contains the water she uses to moisten the pot as needed. A tray with lumps of clay and two enamel ware pots sit nearby. Dorbour, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Dorbour
Subjects:
Forming; Women's work; Potting; Dorbour; Water pots (chokoo)
Ma Fiԑn of Gbao (left) and Abena Wusu of Dompofie (right) spin cotton thread. Their spindles (gԑndԑ in Nafaanra) are weighted by fired clay spindle whorls (gԑndԑ kaan in Nafaanra) which help the spindle to maintain an even spin. Ma Fiԑn uses a calabash bowl as a spinning surface. Abena Wusu uses an enamel-ware bowl placed on a basket. They use their right hand to guide thread onto the spindle as it spins. In their left hand they hold the raw cotton from which the thread is being spun. They control the tension and flow of the cotton by alternately pulling back and easing their left hands. Thread forms as the spindle spins, with the finished product building up in layers toward the spindle's lower end, near the whorl. The baskets on top of which they spin used to store spinning equipment when not in use. Until recent decades, spinning was a routine household activity for women who then gave thread to men skilled in weaving to make cloth for the household. Spindle whorls found on archaeological sites dating to the late 18th and 19th centuries tell us that spinning was also a household activity during those centuries. In the photo's background harvested foods are drying (groundnut, cassava, chili pepper). A large basket and other containers (including a plastic tub) sit next to dried calabash ready to be sent to market. To the right, a clay water pot (chͻkoo in Nafaanra) rests on a metal basin and in the top right is a metal water barrel. Four photos. Gbao, September, 1982.
An educational poster with pictures and text which describes Banda-area village life from the 15th through the 17th centuries. It briefly summarizes what has been learned from archaeological excavations at Kuulo Kataa about metal working. It also outlines the use of wild and domestic animals and the new objects and practices that developed in this time when trade connections with the Niger River area were strong. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text which describes Banda-area village life during the 13th to the 15th centuries. It briefly summarizes what has been learned from archaeological excavations about handicrafts at Ngre Kataa including metal working and pottery making. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are available in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text which describes Banda-area village life during the 18th and 19th centuries based on oral histories, written sources and archaeology. It describes early written references to Banda and briefly summarizes what has been learned about handicrafts like potting and cloth-making based on archaeological excavations at Makala Kataa. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text focused on how past people in the Banda area clothed their families. It describes how people dressed, how they made cotton cloth, and why cloth is no longer made in Banda. It is one of five posters prepared for a Banda community event held in 2014. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
Unfinished clay grinding bowls dry on the palettes (kpankpa in Nafaanra) on which they were formed. After they have dried to a leather-hard state, the potter will remove them from their palettes and score their interiors. The scoring creates a grinding surface used to process vegetables which are added to soups. These bowls may also serve as men's eating bowls (pԑԑ in Nafaanra). Immediately behind the drying bowls is a hearth, swept clean of ashes. Pottery jars can be seen drying in background, right. A chicken forages nearby. Bondakile, October, 1982.
A standing potter puts the finishing touches on the rim of a clay jar that she has molded using a draw-and-drag (direct pull) technique. She has finished the body, neck and rim of the jar and will now set it aside to dry. After it has dried to a leather-hard state, she will remove the jar from the palette (kpankpa in Nafaanra) on which it has been formed and she will add a rounded base. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. As she began she drew the moist clay upward and outward from the lump with which she started. Here she shapes the jar's neck and outward flaring rim. Before doing so, she has smoothed away finger marks created as she formed the jar's body. As she works, she moves around the stump that supports the palette on which the jar is being formed. Bondakile, October, 1982.
A potter has completed the draw-and-drag (direct pull) molding of a clay jar body and rim. The surface of the jar has been moistened and smoothed. It will be set aside to dry. Once it has dried to a leather-hard state, she will remove the partially finished jar from the palette (kpankpa in Nafaanra) on which she formed it and will add a rounded base using fresh, moist clay. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she has drawn the clay upward and outward with her hands. Here she begins to shape the form of the jar's neck and outward-flaring rim. As she works, she moves backwards around the stump that supports the palette (kpankpa in Nafaanra) on which the jar is being formed. Bondakile, October, 1982.
A basketry fish trap (exa in Ewe) made and used by Ewe fishermen in the Banda area, Ghana. Traps like these were used for fishing between the months of August and November. They were effective in catching different types of fish three inches in length or longer. Agbegikrom South, December, 1982.
A potter uses a metal spatula as she forms the neck area of clay jar which she has shaped using a draw-and-drag (direct pull) technique. The striations on the body of the jar were created by a maize cob (bledjukaan in Nafaanra) which she used to shape and smooth the pot's wall. These will be smoothed away as she continues to form the pot. She moves around the stump on which the pot rests as she works. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she draws the clay upward and outward from the center as she moves clockwise around the stump that holds the movable palette (kpankpa in Nafaanra) on which the jar is being formed. The fingermarks left as she pulls and thins the clay will be smoothed over as she continues to shape the jar. Bondakile, October, 1982.
A potter uses a maize cob (bledjukaan in Nafaanra) to smooth the surface of clay jar body that she is molding by a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she has drawn the clay upward and outward, thinning the walls as she works. Here she moves clockwise around the stump that holds the palette (kpankpa in Nafaanra) on which the jar is being formed as she draws the maize cob up, pulling it towards her body. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Here she uses a flat metal spatula to smooth the now-formed jar's exterior surface. She places the edge of her tool at the neck and makes downward strokes to create a smooth surface on the moist clay. As she works, she moves around the stump that supports the palette (kpankpa in Nafaanra) on which the jar is being formed. Bondakile, October, 1982.
A woman stacks clay grinding bowls on top of wood in preparation for a bonfire firing. The bowls are placed to ensure even exposure to the heat of the bonfire. She will place additional fuel on top of the bowls before lighting the fire. Adadiem, 1994.
A potter completes decorations on a clay cooking pot (sro chͻ in Nafaanra). Another pot sits nearby, turned upside down. The lower bodies of the pots have been surface treated by rolling a maize cob (bledjukaan in Nafaanra) across the leather-dry surface of the clay jar. Shallow grooved lines have been etched over top. The clay jars are now ready to be fired. Dorbour, 1994.
A group of unfired clay pots to which red slip (chuma in Nafaanra) has been applied prior to firing. The string of Babobab tree seeds (foreground) is used to burnish the slip. By rubbing the dried slip vigorously with the seeds, the slip adheres to the surface and becomes shiny. To the right rear are several unfired clay eating bowls (kpokpoo in Nafaanra). Dorbour, 1994.
Ten clay cooking pots (sro chͻ in Nafaanra) have been placed upside down on a bed of firewood in preparation for a bonfire that will fire the clay pots. These pots have been red-slipped (chuma in Nafaanra) before firing. In the background is the bark that will be used to cover and surround the pottery before the bonfire is lit. Once lit, the fire burns for beween 30 minutes and an hour, after which the clay jars will be useable and ready for sale. Dorbour, 1994.
A potter uses a metal bracelet as a roulette to make shallow grooves on the leather-hard surface of a cooking pot (sro chͻ in Nafaanra). She rolls the bracelet across a surface that has been textured using a maize cob (bledjukaan in Nafaanra) roulette. Next she will make shallow grooves along the boundary between the smooth upper body of the jar and the maize cob-routletted lower areas. Dorbour, 1994.
Akua Donkor, a Nafana potter, uses a rounded-edged tool to make shallow grooves on the upper body of a soup pot (chiin sinyjͻlͻ in Nafaanra). The clay pot has been allowed to dry to a leather-hard state before the decorations are applied. She has used a maize cob (bledjukaan in Nafaanra) as a roulette (roller) to surface treat the base of the clay pot. A single grooved line sets the maize cob rouletted zone from the smoothed surface above it. The woman wears bracelets that can double as tools for decorating pots. Dorbour, 1994.
A number of large and medium-sized clay jars have been placed upside down on a bed of fire wood in preparation for a bonfire firing. Several previously fired and broken clay pots together with large stones are used to bank the edges of the stacked firewood. More firewood is stacked behind the bonfire area. Adadiem, 1994.
Small clay eating bowls like this one (kpokpoo in Nafaanra) were typically used by women. This one has been blackened after a fashion that became popular in the 20th century. Similar bowls are found on archaeological sites around the Banda area, though often with a flat, pedestaled base and seldom blackened. Dorbour, 1994.
Afua Donkor, a Nafana potter, inspects clay jars of various shapes and sizes that await firing. The liquid red slip (chuma in Nafaanra) has been applied, allowed to dry and then burnished in prepartion for firing. Visible around the courtyard are wooden mortars, a pestle and a metal cooking pot. Thatch-roofed rooms surround the courtyard. Dorbour, 1994.
Peni Krah, a Nafana potter, sits on the ground and uses her left hand to turn the palette (kpankpa in Nafaanra) on which she has molded a clay soup pot (chiin sinyjͻlͻ in Nafaanra), smoothing its rim with a moist cloth held in her right hand. The headpan to her right contains moist clay. Dorbour, 1994.
Fired, blackened clay grinding bowls are stacked (center). While hot from the fire, the bowls have been blackened by rolling them in dry grass or peanut (boŋgrɛ in Nafaanra) shells. To the right, a bonfire firing is in progress. The outside perimeter of the fire is banked with previously fired but broken jars. To the left, a large clay bowl contains a bark solution into which the pots are dipped while still hot from the fire. Behind that, another bonfire burns. To the right (back, center) pots have been stacked in preparation for another bonfire firing. The fashion of blackening grinding bowls began in the Banda area sometime during the 20th century. Adadiem, 1994.
These fired clay pots are specifically designed for water storage. The water jar (chͻkoo in Nafaanra) on the left was made in Adadiem and the one on the right was made by a potter in Dorbour. Unlike pottery intended for other uses, potters do not finish pots intended for water storage in a bark solution to seal and color the pot. Instead, the surface of water storage pots needs to be porous to effectively cool the water stored inside. The size of the water jar's mouth allows access to the water inside but also limits evaporation. The color of these pots is a result of firing conditions. Dorbour, 1994.
Potting clay is spread to dry after being mined and brought to Dorbour by a potter, perhaps aided by her relatives. The clay includes a combination of plastic clay (chͻklͻlͻ in Nafaanra) and sandy clay (sisa in Nafaanra) which are mixed together at the place where the clay is mined. After drying, the clay will be pounded, sifted, mixed with water and kneaded until the clay is the right consistency. A potter only mixes as much clay as she needs to make a batch of pots (6-8). Children may help with the work of pounding and kneading the clay. In the background, houses made of atakpame (coursed earthen-walls) with thatched roofs are visible. Dorbour, 1994.
A potter's tools are laid out for view. Sitting on a well-worn clay-smeared grinding stone are two maize cobs (left; bledjukaan in Nafaanra), half of a seed pod from a tree (jenge in Nafaanra), and a spatula (unknown material). An enamel-ware pot holds several water-worn pebbles, several of which also sit in front of the grindstone. Pebbles (gbeliͻ in Nafaanra) are used to burnish the surface or make decorations on the pot's surface. In front of the grinding stone are two iron rings or "bracelets." The one with a wide flat side (gbooroo in Nafaanra) is used to scrape and thin the pot's walls after they have been allowed to dry. The other can be used to decorate pots. A small clay bowl holds water and a piece of cloth used to moisten and smooth the surface of the pot after it is formed. Dorbour, 1994.
Afua Donkor, a Nafana potter burnishes a dried but as-yet unfired clay pot on which she has applied a red slip (chuma in Nafaanra). She uses a strand of Baobab tree seeds (wasawasa in Nafaanra) to rub the slip, helping the color to adhere to the pot's surface and giving it a sheen. The slip is a thin solution made by mixing a red soil found on the Brawhani road with water. Some is contained in a small can sitting on the ground (left). Finished, unfired pots sit in the room behind the potter. Dorbour, 1994.
Afua Donkor, a Nafana potter, burnishes a dried but as-yet unfired clay pot on which she has applied a red slip (chuma in Nafaanra). She uses a strand of Baobab tree seeds (wasawasa in Nafaanra) to rub the slip, helping the color to adhere to the pot's surface and giving it a sheen. The base of the pot is left unslipped. Dorbour, 1994.
A potter handles a lump of clay that she will use to make a clay pot. Other lumps, each of which will be used to make a pot, are stacked on a metal tray awaiting use. Dorbour, 1994.
After drying, potting clay is stored in potters' houses until needed. When the potter is ready to make a batch of clay pots, she will first pound and then sift the clay. The sifted clay is then mixed with water and kneaded until it is the right consistency for making a pot. Dorbour, 1994
A woman in Dumboli spins cotton thread. She holds raw cotton fiber in her left hand. She has attached a strand of fiber to her spindle (gԑndԑ in Nafaanra), and she prepares to set it and the spindle whorl (gԑndԑ kaan in Nafaanra) which weights it in motion with her right hand. The whorl spins inside a small white vessel (possibly an animal skull or turtle shell) resting on a basket lid. The woman sits on a low stool. Various containers used in food preparation sit behind her. The basket on which she is spinning is used to store her equipment when not in use. Seeing women spinning in their homes would have been common before the second half of the 20th century. Archaeologists find spindle whorls in houses on sites dating to the later 18th and 19th centuries. In earlier times, however, it appears that thread was primarily made in market centers rather than in households. Two photos. Dumboli, 1994.
This short video made from still photographic images shows how potters mine and process the clay they use to make pots. The video includes images of Mo potters in Bondakile and Nafana potters in Dorbour, including Yakosua. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Dorbour, 1994. Length: 2.25 minutes.
A young boy stands at the base of the clay pit where potters from Bondakile mine the clay they use for making pottery. Soils from upper and lower levels are mixed together to make a workable potting clay. Children help relatives who are potters to dig and process the clay. Two photos. Bondakile, October, 1982.
This short video made from still photographic images shows how Mo potters in Bondakile make clay jars using a draw-and-drag technique. The focus is on forming of the jar's body and rim. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Length: 2.59 minutes.
A woman in Bondakile spins cotton thread from raw fiber held in her left hand. She holds the raw cotton between her thumb and index finger, using her middle finger to provide tension as she stretches and thins the fibers using her right hand. The thread is wound thickly toward the base of the spindle (gԑndԑ in Nafaanra) above the spindle whorl (gԑndԑ kan in Nafaanra) which is barely visible at the base of the spindle. The woman uses (what appears to be) a turtle shell (carapace) as a surface on which to spin. She has stabilized the shell with a piece of folded cloth which sits on top of an enamel ware plate. A calabash and a plastic bucket site nearby. Spinning was a routine household activity done by women until commercially manufactured cloth became commonplace (second half of the 20th century). Two photos. Bondakile, 1994.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Bondakile
Subjects:
Plastic containers; Women's work ; Cotton thread; Techniques
In June 2011, Banda Research Project team member Amanda Logan collaborated with local artist Kwame K.B. 2 to develop paintings for the doors of the Banda Cultural Centre's courtyard. The paintings illustrate crafts practiced in the area for which we have archaeological evidence. This image shows a blacksmith forging iron. Based on the presence of byproducts like slag and the tools used to make metal, we know that blacksmiths smelted and forged iron in the Banda area from at least 1000 years ago. Banda Cultural Centre, Ahenkro, June, 2016.
Potters in Adadiem place bark over clay pots that have been stacked on top of a bed of firewood. The bonfire has been lit and the bark serves as additional fuel. More red-slipped clay pots sit behind, waiting for the next firing. One woman carries a child on her back. The bonfire will burn for between 30 minutes and an hour, after which the pots will be ready for use or sale. Abena Donkor (far right) assists while Solomon Kojo, young boy in brown shorts, looks on. Two photos. Adadiem, 1994.
In June 2011, Banda Research Project team member Amanda Logan collaborated with local artist Kwame K.B. 2 to develop paintings for the Banda Cultural Centre's courtyard doors. The paintings illustrate crafts practiced in the area for which we have archaeological evidence. This image shows a woman headloading pottery on her way to market. Pottery making and marketing has been practiced in the Banda area for thousands of years. Scientific studies of pottery from archaeological sites across the region show that pottery was made in different locations over time and was widely traded within and beyond the region. Banda Cultural Centre, Ahenkro, June, 2016.
In June 2011, Banda Research Project team member Amanda Logan collaborated with local artist Kwame K.B. 2 to develop paintings for the Banda Cultural Centre's courtyard doors. The paintings illustrate crafts practiced in the area for which we have archaeological evidence. This image shows a woman spinning cotton thread (right) and a man wearing a locally made blue-and-white strip-woven cloth (left). Archaeologists find spindle whorls used to make thread on late 18th-and early 19th-century archaeological sites. This shows that households produced their own cloth during recent centuries. Before the 17th century, cotton cloth seems to have been less common and was probably acquired through trade from market centers. Banda Cultural Centre, Ahenkro, June, 2016.
Afua Donkor, a Nafana potter, selects and places fuel as she prepares to fire clay soup pots (chiin sinyjͻlͻ in Nafaanra) that have been slipped red. Other clay pots sit nearby awaiting firing, some in a headpan. The pots are carefully stacked on top of the wood and additional fuel placed on top. Additional firewood is stacked behind and in front lays the bark that she will use to cover the clay pots before lighting the bonefire. Once lit, the bonfire will burn for between 30 and 60 minutes, after which the fired pottery will be hardened, useable and ready for sale. Two photos. Dorbour, 1994.
Potters and their helpers place hot clay jars, just removed from the bonfire, into a solution made from pounded tree bark. They use their long wooden poles to carry the pots to large pottery bowls containing the bark solution. They dip and turn the pot in the solution, allowing it to carbonize on the surface of the hot jar. This finishing step colors the jar's surface and makes its walls less porous which is said to improve its cooking performance. The remains of the bonfire, banked by previously fired broken pots, can be seen in the rear center. Four photos. Bondakile, October, 1982.
Yaa Tenabrԑ, a Nafana potter, stands as she begins to pull a clay lump upwards and outwards, using a draw-and-drag (direct pull) technique to form the walls of a clay pot. The clay rests on a metal plate (kpankpa in Nafaanra) supported by a wooden stump. She moves clockwise around the stump, using her left hand to draw clay up from the center of the lump and her right hand to shape and thin what will become the walls of the pot. As she pulls and smooths the clay, she forms the upper body and rim of the pot. The finger marks visible at this stage of the pot's forming show the direction in which she pulls the clay as she works. These marks will be smoothed away as she continues to form the pot. She uses a maize cob (bedjukaan in Nafaanra) as a tool to shape and smooth the pot's walls. She uses a spatula-like tool to thin and further smooth the surface. When she is finished forming the body and rim, she will set the clay jar aside to dry on the wooden pallet on which it rests. Once dry, she will add a rounded base to the pot. Five photos. Dorbour, 1994.
In June 2011, Banda Research Project team member Amanda Logan collaborated with local artist Kwame K.B. 2 to develop paintings for the Banda Cultural Centre's courtyard doors. The paintings illustrate handicrafts practiced in the area for which we have archaeological evidence. Here Kwame K.B. 2 stands next to his painting of a woman carrying pottery to market. Ahenkro, 8 June, 2011.
Ama Donkor, a Nafana potter, sits as she uses moist clay to form the base of a soup pot (chiin sinyjͻlͻ in Nafaanra). She is adding the base to a body and rim that she made the day before and set aside to dry. The clay pot rests on a metal plate that she can turn as she works (kpankpa in Nafaanra). She adds small lumps of clay as she gradually builds the rounded base of the pot. Three photos. Dorbour, 1994.
Banda Queen Mother Lelԑԑ Akosua Kepefu (center) shows an example of locally made strip-woven cloth to a young painter as a model for a painting on the Banda Cultural Centre doors. Enoch Mensah holds one end of the cloth. To the right, Afua Fofie, Linguist, looks on with artist Kwame K.B. 2. They stand on Ahenkro's main street (view towards the south). Ahenkro, 5 June, 2011.
Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
A crucible used to process copper alloys from Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12. Crucibles like this would have been used to heat copper alloys to a liquid state for use in casting, including casting through a lost-wax process. Scale in cm. Kuulo Kataa, 27 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Handicraft; Metal casting; Metalworking; Copper alloys; Lost wax casting; Archaeology; Lost-wax process; Crucibles; Artifacts (Antiquities)
Spindle whorls (gԑndԑ kaan in Nafaanra) are made by Muslim men in Kokua, a village on the Sampa-Asri road. Here a man decorates fired clay whorls, applying bands of colors (white, red, yellow) to their dark surface. He applies the color using a stylus, twisting the whorl to create horizontal bands around the whorl's circumference. In the foreground a finished spindle whorl sits on top of unpainted whorls in a metal pot. A bundle of thin wooden spindles sits at the man's foot, next to a calabash that holds white pigment. Yellow pigment is held by another container, possibly a turtle shell (carapace). Next to it, a red pigment stone (ochre) rests on a heavily worn grinding stone. The beauty of such a painted spindle whorl inspired the Nafaanra proverb "Chlͻ were nyu na gԑndԑ yi" (The woman is as beautiful as the spindle whorl.") Archaeological examples of whorls found on late 18th- and 19th-century sites in the Banda area are often shaped like these from Kokua, but few show signs of paint, perhaps because it has worn off during use. Kokua, 1994.
A man in Dompofie makes a basketry tray (gbrewa in Nafaanra). He uses a (metal?) tube as a frame. First the warp slats are placed at intervals on the frame. Then the weft slats are interwoven with the weft, starting from the center and working outward to the edges. Trays like this could be used in crop processing or for temporarily storing foodstuffs. A finished, well-worn basketry tray is visible, upper left, leaning against a pole. Dompofie, 1995.
A spindle (gԑndԑ in Nafaanra) and a spindle whorl (gԑndԑ kaan in Nafaanra) used to make cotton thread. A black camera lens cap shows scale. For much of the 20th century, spinning was a routine activity for women. Some of the spun cotton thread was dyed blue. The blue thread was woven together with white thread to make durable strip-woven cloths that were highly valued. The rounded spindle whorl is made from fired clay and painted with white and red designs. The spindle whorl's decoration inspired the Nafaanra proverb: "Chlͻ were nyu na gԑndԑ yi" (The woman is as beautiful as the spindle whorl." Archaeologists have found spindle whorls on Banda-area archaeological sites dating to the late 18th and early 19th century. Before that time it seems that spinning cotton was not a routine household activity and that cloth was made in market centers. The spindle whorl is laying on a courtyard floor, with an eroding plaster layer visible in the background. Gbao, September, 1982.
Surface next to the deep clay pit where potters form Bondakile mine the clay they use for making pottery. Piles of excavated clay surround the pit. Bondakile, October, 1982.
These partially formed clay jars (chͻ in Nafaanra) are drying, resting on the palette (kpankpa in Nafaanra) on which they were formed. Once dried to a leather-hard state, the potter removes them from the plate and, using fresh moist clay, adds a rounded base to the jar. To the left, a metal cooking vessel rests nearby. Bondakile, October, 1982.
A toddler girl wearing a protective strand of beads sits beside finished clay grinding bowls that have been set aside to continue drying before firing. The scoring on the interior of the bowl provides a rough surface against which cooked vegetables can be ground into a paste before being added to a soup. These bowls may also serve as men's eating bowls (pԑԑ in Nafaanra). Bondakile, October, 1982.
A plastic bowl holds pieces of animal bone that have been burned at a high temperature (calcined). Calcined bone turns white and its texture becomes chalky. Women periodically rub this bone chalk on their fingers to aid handling of the cotton as they spin to make cotton thread from raw fiber. Also in the bowl is a round clay spindle whorl (gԑndԑ kaan in Nafaanra) painted with white lines and a daub of white-and black cloth. Gbao, September, 1982.
A man in Sabiye weaves a fiber mat (dԑnglԑ in Nafaanra) using 'gbannaa'. The mat is rolled and he works on its outer edge. Mats like these were pliable and used in a variety of ways. People slept on them within their houses. When people died, they might be wrapped in one of these valuable mats before being buried. Two photos. Sabiye, 1994.
Two men (left) stand on the edge of a deep pit previously mined by potters from around Bui Village as a source of potting clay. The deep clay pit was used before the mid-20th century when potters were still practicing their craft east of the Banda hills. The clay pit was located along a stream which drained into the Black Volta on its south bank, on the road leading west from Bui Village. The pit was located in an area later flooded by the rising waters of Bui Lake after construction of the Bui Dam. A red-and-white 2 meter photo scale stands upright in the pit to show the pit's depth. West of Bui, 1989.
Excavations in unit 42N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at Mound 6, Ngre Kataa. Foreground, left, a grinding stone (GS 08-10) rests with its working surface face down. It sits at a slightly higher level than a nearby (left) whole pottery jar (NK 08-406). To the right of these, a partial pot (NK 08-282) and a tuyere fragment (NK 08-284) are clustered together with two halves of a broken pottery jar, lying with its exterior surface facing down. To the south (behind), near the sign board and framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Another partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12) have been exposed to the left of the sign board at 77 cm below the unit's datum. The narrow dark bands visible in the soil are the traces of animal burrows. Photo scale adjacent to the sign board in centimeters. View looking south. Site Ngre Kataa. 7 July 2008.
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
A folded textile made of handwoven cotton strips, photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. The name of this cloth design is Kakya. Single strands of blue warp thread create vertical lines against a background of white warp and weft threads. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
A wooden spindle wrapped with cotton thread rests on top of a folded black-and-white textile made from handwoven cotton strips. Cloth of this design is called Kyara. Hand stiching can be seen along the edges where strips have been sewn together. These were among heirloom objects on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre with sponsorship by Dr. Amanda L. Logan. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft;
A bow-shaped tool (klada in Nafaanra) made from flexible wood and taut string rests on a folded handwoven blue-and-white textile called Kyara. Women used the bow to prepare cotton for spinning into thread. After removing seeds from the cotton, they held the bow's string over the fibers. Plucking the string caused cotton fibers to stick to it. By pulling up on the bow, the cotton became fluffed and its fibers aligned, making it easier to spin. The klada and handwoven textiles seen in the picture were among heirloom objects on display as part of a Heritage Day and Olden Times Foods Fair held at the Banda Cultural Centre. Ahenkro, 2014-07-31.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
A textile made of handwoven cotton strips, photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. This cloth is called Kyekye and is sewn from strips of similar dark blue-and-white design. Variation in patterning is created by offsetting strips. Sections of solid color created by weaving blue weft over blue warp threads are sewn to strip sections with horizontal stripes created by alternating blue and white weft threads. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
A folded white textile made of handwoven cotton strips, photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre, with sponsorship from Amanda L. Logan. The name of this cloth design is Bɔfige. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
Two folded textiles made from handwoven cotton strips, pieced together in a design called Dɔnkɔnfra. They were photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. One cloth rests on top of the other. The lighter colored strips in each cloth have white warp threads woven together with white, red and blue weft threads. Darker strips were woven from blue and white warp and weft threads. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
A folded gray-and-white textile made of handwoven cotton strips, photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. Textiles of this design are called Gbenalekinu. A narrow band of red woven accent can be seen on two of the strips. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
A textile made of handwoven cotton strips, photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. This cloth is called Mmɔlɔ and is sewn from strips of similar blue-and-white striped design. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
8.165892, -2.354363
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
Two textiles made from handwoven cotton strips rest on an aluminum tray, together with a spindle wrapped with locally made cotton thread, next to which is some unspun fluffed cotton. This blue-and-white cloth design is known as Mmɔlɔ Kyara. Visible at the top of the image are two baskets in which women keep their spinning equipment. To the right, a calabash ladle rests inside a calabash bowl (chrԑgbͻͻ in Nafaanra). These heirloom objects were among displays at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre with sponsorship by Dr. Amanda L. Logan. Ahenkro, 31 July, 2014.
A folded textile made of handwoven cotton strips, photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. The name of this cloth design is Mmɔlɔ Kyara. A wood spindle wrapped with locally made cotton thread rests alongside the cloth. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
8.165892, -2.354363
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
Two folded textiles made from handwoven cotton strips, pieced together in a design called Mmɔlɔ Kyara. They were photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. One cloth is made from alternating strips of white and blue-and-white striped cloth. The other is made of similar blue-and-white strips, in which white weft threads create a checkered design. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft
Two textiles made from handwoven cotton strips rest on an aluminum tray, together with a spindle wrapped with locally made cotton thread, next to which is some unspun fluffed cotton. This blue-and-white cloth design is known as Mmɔlɔ Kyara. Visible at the top of the image are two baskets in which women keep their spinning equipment. To the right, a calabash ladle rests inside a calabash bowl (chrԑgbͻͻ in Nafaanra). These heirloom objects were among displays at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre with sponsorship by Dr. Amanda L. Logan. Ahenkro, 31 July, 2014.
A textile made of handwoven cotton strips, photographed while on display at a Heritage Day and Olden Times Food Fair held at the Banda Cultural Centre. This cloth is called Nyankakya and is sewn from strips of similar white-and-blue design. Ahenkro, 31 July, 2014.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects Facet:
Textiles; West African strip weaving; Weaving; Handicraft