Search

Start Over Subject(s) artifacts (antiquities) Genre digital image

51. Partial pottery vessel, Ngre Kataa, 2009

Description:
Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102;
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4, 97-105 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Jar
Subjects Facet:
Pottery; Archaeology; Artifacts (Antiquities)
Identifier:
NK 09-787
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

52. Iron projectile point fragment, Ngre Kataa, 2009

Description:
Partial iron projectile point, the tip of the head (left) broken off. The base of the head forms a right angle barb with the short tang. The tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood to form an arrow. This point was found in an area (mound 7) that archaeologists interpret as a house mound. The artifact is corroded by rust. Scale in cm. Length: 9.1 cm. Weight: 13.6 g. Site Ngre Kataa. 4 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 8
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-114
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

53. Iron disc, Ngre Kataa, 2009

Description:
Flat, thin iron disk (SF 09-159). The object is corroded by rust and its edges notched in two spots. Its function is unknown. The disc was found in a cluster (cluster D) with an iron bangle (SF 09-158) and two stones whose surfaces showed evidence of grinding. The cluster was part of a wider feature (clusters A-D) that archaeologists interpret as a shrine, which overlaid stratified deposits in a metallurgical workshop (mound 6). Scale in cm. Width: 8.1 cm. Thickness: .2 cm. Weight: 29.8 g. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19101
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 194 cm S, 4 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 09-159
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

54. Tri-looped iron bangle, Ngre Kataa, 2009

Description:
A tri-looped iron bangle (SF 09-158). The bangle was formed from a single round iron rod, looped three times at the top (detail, left). The rod is joined with a single twist at the base, with each end of the rod overlaid by a thin iron strap (bottom), causing slight thickening on either side of the twisted base. The bangle was found in close association with a flat iron disc (SF 09-159) and two stones whose surfaces showed evidence of grinding (cluster D). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.5 cm. Weight: 30.2 g. Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 195 cm S, 22 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-158
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

55. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Coverage:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

56. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

57. Pottery jar, mound 6, Ngre Kataa, 2008

Description:
Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19127
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W. Piece plot: 145-160 cm W, 12-30 cm S, 46-63 cm bd
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Fiber roulette
Subjects Facet:
Archaeology; Artifacts (Antiquities); Pottery
Identifier:
NK 08-176
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

58. Iron projectile point, Ngre Kataa, 2008

Description:
Iron projectile point fragment. The elongated head (left) has a single barb at its base and a short tang (right). The point has been corroded by rusting. Scale in cm. Length: 11.3 cm. Weight: 14 g. Site Ngre Kataa. 26 June 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 14
Date:
2008-06-26
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 08-024
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-06-26
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

59. Everted-rim pottery jar, Ngre Kataa, 2008

Description:
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:
2008-07-15
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Punctate; Cord roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
NK 08-406
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-15
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

60. Iron bangle, Ngre Kataa, 2008

Description:
An iron bangle (SF 08-182) made by coiling a flat iron rod with thinned pointed ends. The bangle was found in association with pottery, other bangles and artifacts (cluster A). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) that capped a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.2 cm. Weight: 38.8 cm. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143
Provenance:
Ngre Kataa, Mound 6, Unit 46N 8W, Level 1. Piece plot: 0 cm S, 110-117 cm W, 36-38 cm bd
Date:
2008-07-15
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 08-182
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-15
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111