A circular iron bangle, made from a rounded iron rod with abutting ends (bottom of photo). The bangle's surface is corroded by rust. This artifact was found closely associated with a copper alloy twinned figurine, a tanged iron blade, a rounded quartz pebble and several other objects, which archaeologists interpret as a shrine cluster. The cluster was placed among metal-working features in a metallurgical workshop.Scale in cm. Maximum diameter: 8.1 cm. Weight: 75 g. Site Ngre Kataa. 19 July 2008.
Triangular-headed iron projectile point with a barb at the head's base (left) and a long tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found in an area (mound 7) that archaeologists interpret as a house mound. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 9 cm. Weight: 9.2 g. Site Ngre Kataa. 7 July, 2008.
Triangular-headed iron projectile point (SF 09-033) with a slightly squared base (left ) and a short tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found close to several anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 8.1 cm. Weight: 9.3 g. Site Ngre Kataa. 30 May 2009.
Iron projectile point with an asymmetrical head (left), a single barbed at the base of the head and a small barb on the opposite side along the tang. To make an arrow, the long tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood. This artifact was found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The point has been corroded by rusting. Scale in cm. Length: 15.2 cm. Weight: 13.7 g. Site Ngre Kataa. 2 June 2009.
A curved iron blade (brɔfiɛn in Nafaanra), rounded at the tip (left), slightly shouldered at the base, with a long tang (right) for the purpose of hafting. The tool shows signs of corrosion. The artfiact was excavated from a house mound and found in a level of midden-like deposits. Scale in cm. Length: 11.2 cm. Weight: 11.7 gm. Site Kuulo Kataa. 14 June, 1995.
Triangular-headed iron projectile point with a single barb at the base of its head (left) and a long thin tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a shaft made of bamboo, reed or lightweight wood to which it was hafted. The artifact shows signs of corrosion. The point was excavated from a deep midden mound in an disturbed by a pig burrow. Scale in cm. Length: 12.4 cm. Weight: 14.2 g. Site Ngre Kataa. 25 June, 2008.
Triangular-headed projectile point with barbs on either side of the head's base (left). Its long tang (right) is bent. To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found in an area that archaeologists interpret as a metallurgical workshop. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 9.8 cm. Weight: 10.2 g. Site Ngre Kataa. 5 July, 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 44N 6W, Level 3; piece plot: 67-71 cm S, 142-156 W
A piece of a copper alloy (brass) bar, found in association with burned features that archaeologists interpret as linked to metalworking (left: side view; right, end views). The bar is square in cross-section (right). One end appears finished and has a slight circular depression or dimple (bottom right). The other end (top right) is jagged and appears to be broken from a longer bar. The artifact was recovered from soil associated with an amorphous burned feature, underneath which were a series of burned basins likely created by forging activities. The object is similar in appearance to brass bars known from the Ma'adin Ijafen cache of brass ingots documented by Theodore Monod in eastern Mauritania in the 1960s. As such, this may be the form in which metalworkers got the copper alloys that were worked at the site. Length: 1.7 cm. Weight: 2.8 g. Scale in cm. Site Ngre Kataa. 25 June 2009.
A flat, thin iron disk. The object is corroded by rust. Its function is unknown. The disc was found in close association with a large anvil or grinding stone and adjacent to a distinctive pottery vessel and a smaller, irregularly shaped piece of flat iron (SF 09-171). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 9.4 cm. Thickness: .2 cm. Weight: 49.3 g. Site Ngre Kataa. 4 July 2009.
A flat, irregularly shaped iron with circular depression. The object is corroded by rust and its original form and function are unknown. It was found in close association with a large anvil or grinding stone (GS 09-15), a circular iron disk (SF 09-370) and a distinctive pottery vessel (NK 09-787). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 5.7 cm. Thickness: .2 cm. Weight: 9 g. Site Ngre Kataa. 4 July 2009.