Two views of a twinned lost-wax cast copper alloy figurine from Kuulo Kataa, Mound 118, Unit 62W 4N, Level 3. Lower "foot" plate broken off from figurine body. Height: 3.7 cm. Weight: 13.2 g. Kuulo Kataa, 15 June, 1995.
Two views of a serpent-like figure made from an iron rod. The "head" of the direct metal sculpture resembles a triangular-tipped iron projectile point, similar to those found on the same site during the same time period. The body is formed by undulating S-shaped loops which are stacked atop one another to form the "tail." Kuulo Kataa, Mound 118, Unit 62W 4N, Level 1. Scale in cm. Length: 8.4 cm. 39.6 g. Kuulo Kataa, 15 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 118, Unit 62W 4N, Level 1
Location(s) Facet:
Kuulo Kataa
Subjects:
Serpents
Subjects Facet:
Direct metal sculpture; Archaeology; Snakes; Iron; Projectile point; Artifacts (Antiquities)
Two views of a twinned lost wax cast copper alloy figurine from Ngre Kataa, Mound 6, Unit 44N 6W, Feature 5 cluster. Height: 5.9 cm. Weight: 31.3 g. Ngre Kataa, 19 July, 2008.
Informational posters on Banda history and archaeology are displayed on easels in the hall of the Banda Cultural Centre. Examples of pottery recovered from excavations at Banda area sites rest on shelves in the background. Banda Cultural Centre, Ahenkro, 18 July, 2011.
Front and side views of a twinned, lost-wax-cast copper-alloy figurine from Kuulo Kataa, Mound 130, Unit 95E 108N, Level 2. Height: 3.9 cm. Weight: 3.8 g. Kuulo Kataa, 4 July, 2000.
Front and side views of a lost-wax cast copper alloy figurine from Kuulo Kataa, Mound 130, Unit 95E 108N, Level 3. Height: 3.5 cm. Weight: 2.4 g. Kuulo Kataa, 4 July, 2000.
A copper alloy finger ring made from a rod forged into undulating S-shaped loops and joined at its ends by a flat metal plate. Two views. From Kuulo Kataa, Mound 101, Unit 2W 2S, Level 7. Height: 1.4 cm. Width: 2.6 cm. Weight: 8.4 g. Kuulo Kataa, 9 June, 1995.
Members of the 2009 archaeological excavation team at Ngre Kataa. Team members included graduate students from the University of Ghana and North America, a representative of the Ghana Museums and Monuments Board and Banda men from Ahenkro and Nyrie. Back row (L-R): David Adjartey Tei-Mensah, Peter, Frimpong, Enoch Mensah, Yaw Mensah, Yaw Francis, Devin Tepleski. Middle row (L-R): Amanda Logan, Sampson Fordjour, Kofi Paul, Felix Ochra, Yaw Frimpong; J.K. Mensah; Kofi "Photo" Manu; Ann Stahl, Kwakye Eric, Frank, Kofi Nsia; Front, seated (L-R): Abass Iddrisu, Osei Kofi, Andrew Gurstelle (kneeling). 9 July, 2009, Ngre Kataa.
Banda Research Project team members present informational posters on Banda history and heritage to members of the Banda Traditional Council. Sampson Attah (kneeling, stripped shirt) describes the content of the "Banda in the 18th & 19th Centuries" poster to the paramount chief and elders. Project members Ann Stahl (kneeling) and Kofi "Photo" Manu (standing, brown print shirt) look on together with assembled elders. Banda Ahenkro Palace, 11 July, 2011.
The Banda Queen Mother (Lelԑԑ Akosua Kepefu) and her elders look at informational posters on Banda history and heritage prior to the community event at which they were launched. Lelԑԑ Kepefu (left) listens as as Elder and Linguist Afua Fofie points to an image of women spinning cotton thread on the "Banda in the 18th and 19th Centuries" poster. Banda Research Project team members Sampson Attah (standing, orange collar) and Timothy Fordjour (right) look on. Banda Cultural Centre, Ahenkro, 15 July, 2011.
Banda Research Project team member Yaw Frimpong (blue shirt with the Banda Cultural Centre "Unity" logo) serves as a docent for one of the informational posters on Banda history and archaeology launched at a 2011 community event. Project team member Frimpong from Nyire (tan shirt) shares insight as several community members listen. A young man in the rear uses his cell phone to take a photo of the poster as he listens to the conversation. Banda Cultural Centre, Ahenkro, 15 July, 2011.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre; Community engagement; Community event; Poster
Members of the archaeological excavation team at Ngre Kataa. Team members included graduate students from the University of Ghana and from North America, a representative of the Ghana Museums and Monuments Board and Banda men from Ahenkro and Nyrie. Back row (L-R): Amy Groleau, Kofi Paul, Yaw Frimpong, Kofi "Photo" Manu, Felix Ochra, Mr. Monney, Nelson Anane, Sampson Fordjour, Yaw Mensah, Enoch Mensah, Ben Nutor, Amanda Logan, Osei Kofi. Front row (L-R): Ann Stahl, J. K. Mensah, Idrusu, Abass Iddrisu, Kofi Nsia, Kwakye Eric. Ngre Kataa, 19 July, 2008.
Banda Research Project team members Kofi Paul and Kofi Nsia screen soil from a Mound 7 excavation unit at Ngre Kataa as team member Idrusu brings another headpan of soil. The excavated soil is sieved through 1/4 inch mesh screen in order to recover artifacts (fragments of pottery, metals, beads, animal bone) that will be bagged, cataloged and studied. Studying these objects and the contexts from which they were recovered (their provenience) helps archaeologists to learn about the daily lives of past people. Ngre Kataa, 9 July, 2008.
Archaeological team member Enoch Mesah (left, white shirt) explains what archaeologists have been learning through excavation of Mound 7 at Ngre Kataa. He addresses Tolɛɛ Gbankama, chief of Nyire (standing, center, white shirt) and accompanying Nyire elders during a site visit. Archaeological team member Kofi Nsia pauses excavation during the conversation, the short-handled hoe with which he is working resting on the ground in front of him. Ngre Kataa, 6 July, 2009.
Community members discuss one of the informational posters on Banda history and archaeology launched at a 2011 community event. Banda Cultural Centre, Ahenkro, 15 July, 2011.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre; Community engagement; Community event; Poster
Boase Chief Tolԑԑ Ligbi Wulotei (center) looks at pottery from Banda area archaeological sites while Banda Project team member Boye (far right) looks on. Banda Cultural Centre, Ahenkro, 15 July, 2011.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre; Community engagement; Community event
Banda Research Project team member Samuel Babatu (white shirt) serves as a docent for one of the informational posters on Banda history and archaeology launched at a 2011 community event. Young people gather to listen as he discusses the poster's content. In the background, other project team-member docents (Boye, Kofi "Photo" Manu and Yaw Frimpong) share other posters. Banda Cultural Centre, Ahenkro, 15 July, 2011.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre; Community engagement; Community event; Poster
Young people look at and talk about the"Banda in the 15th to 17th Centuries" informational poster during a Banda Heritage community event. Banda Cultural Centre, Ahenkro, 15 July, 2011.
Banda Research Project team members present informational posters on Banda history and heritage to members of the Banda Traditional Council. Sampson Attah (kneeling, stripped shirt) describes the content of the "Learning about Life in the Past" poster to the paramount chief and elders. Project members James Anane (standing, red shirt) and Ann Stahl (kneeling, right) look on. Banda Ahenkro Palace, 11 July, 2011.
Members of the 1990 archaeological excavation team at Makala Kataa. Team members included Banda men from Ahenkro and Makala. Back row (L-R): Kwasi Donkor, Donkor Johnson, __, Lamini, Kwasi Mensah (driver), Kwadwo Manu, Obour Bartholomew, Yaw Francis, Enoch Mensah, Mensah Listowell (red shirt). Front row (L-R) Daniel Mensah, Kwabena Mensah, Malik Abrefa, Ann Stahl, Yaw Frimpong, Osei Kofi. Also pictured are Peter Donkor and Richard Aboabo. Makala, July, 1990.
Members of the 1989 archaeological excavation team at Makala Kataa. Team members included Banda men from Ahenkro and Makala. Left-right: Enoch Mensah, Yaw Frimpong, Kwasi Donkor, Obour Bartholomew, ___, Osei Kofi, Samuel Babatu, Yaw Francis, Mustapha, Donkor Johnson. Makala Kataa, July, 1989.
Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
Miniature lost wax cast spoon, perhaps a gold weight. From Ngre Kataa, Mound 7, Unit 14N 22E, Level 8. Length: 4.3 cm. Weight: 2.1 g. Ngre Kataa, 27 June, 2009.
A crucible used to process copper alloys from Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12. Crucibles like this would have been used to heat copper alloys to a liquid state for use in casting, including casting through a lost-wax process. Scale in cm. Kuulo Kataa, 27 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Handicraft; Metal casting; Metalworking; Copper alloys; Lost wax casting; Archaeology; Lost-wax process; Crucibles; Artifacts (Antiquities)
Finger ring made from twisted copper alloy wire. From Ngre Kataa, Mound 6, Unit 44N 4W, Level 5. Width: 2.3 cm. Weight: 1.6 g. Ngre Kataa, 8 July, 2009.
Several grinding stones, a whole pot and a cluster of pottery sherds have been exposed in situ at the base of level 3, unit 44N 4W at Mound 6, Ngre Kataa. The large grinding stone in the foreground (grinding stone 1, NK-08-112) is oriented with its grinding surface facing down. Another smaller stone rests on a soil pedestal created as archaeologists excavated surrounding soil to a lower level. Upper right, a whole pottery jar (NK-08-176) sits next to a large grinding stone (grinding stone 3, NK-08-173) oriented with its grinding surface up. To the far left, above the photo scale in centimeters, archaeologists have exposed the edges of a pottery jar, broken in half and lying on its side. As excavations extended into the adjacent unit (42N 4W, to the left), this broken pot was found to be associated with two tuyere fragments. This cluster of grindstones, tuyeres and nearby burned features is interpreted as part of a larger metal-working workshop, the activities of which led to the build up of mound 6. The soil on the right side of the unit is darker because it is moister than that on the left. View to west. Site Ngre Kataa. 1 July, 2008.
Banda Research Project team members Amanda Logan (right) and Amy Groleau (left) draw a plan map of units 44N 4W and 44N 6W, Mound 6, Ngre Kataa. They map in situ artifacts and features, including several large grinding stones, a whole pot, pottery clusters and a tuyere fragment. Wooden stakes mark the corners of 2 x 2 meter excavation units. A photo scale place near a partially exposed everted rim jar in unit 44N 6W (NK-08-407) is in 5 centimeter increments. Ngre Kataa, 7 July, 2008.
Excavations in unit 42N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at Mound 6, Ngre Kataa. Foreground, left, a grinding stone (GS 08-10) rests with its working surface face down. It sits at a slightly higher level than a nearby (left) whole pottery jar (NK 08-406). To the right of these, a partial pot (NK 08-282) and a tuyere fragment (NK 08-284) are clustered together with two halves of a broken pottery jar, lying with its exterior surface facing down. To the south (behind), near the sign board and framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Another partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12) have been exposed to the left of the sign board at 77 cm below the unit's datum. The narrow dark bands visible in the soil are the traces of animal burrows. Photo scale adjacent to the sign board in centimeters. View looking south. Site Ngre Kataa. 7 July 2008.
A twinned lost wax cast copper alloy figurine from Ngre Kataa, Mound 6, Unit 44N 6W, Feature 5 cluster. Archaeologists interpret the Feature 5 cluster as a shrine placed among metalworking facilities. Height: 5.9 cm. Weight: 31.3 g. Ngre Kataa, 19 July, 2008.
A deeply worn grinding stone (grindstone 1, NK-08-112) removed from levels 1-2, unit 44N 4W, Mound 6, Ngre Kataa, photographed at the side of the excavation unit. The grinding stone was found in association with other grinding stones, tuyere fragments and whole and partial pots. When found, the grinding stone was oriented with its working surface facing downward. It was located adjacent to a concentration of dark soil (feature 1) that contained abundant oxidized sediment, slag and broken pottery. Archaeologists interpret the features at Mound 6 as facilities used to make and process metals. Photo scale in 5 centimeter increments. Ngre Kataa, 2 July, 2008.
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
A finger ring made of twisted copper alloy wire is photographed in situ. Base of level 5, unit 44N 4W, Mound 6, Ngre Kataa. Scale in 5 centimeter increments. Ngre Kataa, 8 July, 2009.
The mouth of a perforated shrine pot (left) is covered with the pedestaled base of another pot. It remains in situ as the surrounding areas of unit 46N 2W are excavated to lower levels. Behind, the stratified layers of Mound 6 are visible in the unit's north wall. Center (back) are a series of anvil and grinding stones exposed at higher mound levels in other excavation units. During excavations in 2008, a cluster of four anvil/grinding stones was found at a level slightly higher than but adjacent (left/west) to the perforated pot. At right, in lower levels, two grinding stones rest at an angle in association with a burned feature. Archaeologists interpret Mound 6 as a metallurgical workshop at which stratified levels built up through repeated use of the same location. Photo scale in centimeters. Site Ngre Kataa. 2 July, 2009.
Side view of a broken pottery sherd with a large slag inclusion. The use of crushed slag as a tempering material included in potting clay is first seen in pottery associated with Ngre phase sites in the Banda area. The use of crushed slag as a temper intensifies during Kuulo phase times, after which it becomes uncommon. Ngre Kataa, June, 2008.
A light-colored slurry plaster marks the outlines of earthen walls exposed through excavations at Mound 7, Ngre Kataa. The upside down "T" shape shows the intersection of two walls. The vertically oriented wall is made from a lighter colored clayey soil compared to the darker horizontally oriented wall. Both walls were coated on the inside and outside with a thin plaster, appearing as a light-colored thin line exposed as archaeologists excavated the horizontal level. A red-and-white photo scale lies across one of the walls near a north arrow and a photo board with provenience information. Ngre Kataa, 6 June, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 12N 24E, 80 cm below datum
A light-colored slurry plaster marks the outlines of earthen walls exposed through excavations at Mound 7, Ngre Kataa. View looking eastward. The L-shaped juncture where two walls intersect is visible (bottom). The interior and exterior of the walls were coated with a thin plaster, appearing as a light-colored thin line exposed by archaeologists as they dug down. A two-meter scale appears (left). To the right and outside the building is a cluster of stones, some perhaps used in food processing activities. Ngre Kataa, 6 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Units 12N 24E and 12N 26E, 80 cm below datum
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Building; Clay; Plastering; Walls; Grinding stone
A light-colored slurry plaster marks the outlines of earthen walls exposed through excavations at Mound 7, Ngre Kataa. View looking westward. The T-shaped juncture where two walls intersect is visible (center, top). The interior and exterior of the walls were coated with a thin plaster, appearing as a light-colored thin line exposed by archaeologists as they dug down. A two-meter scale appears (right) by a photo board. To the left and outside the building is a cluster of stones, some perhaps used in food processing activities. Ngre Kataa, 6 June, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Units 12N 24E and 12N 26E, 80 cm below datum
Iron slag is formed as a byproduct of iron smelting. Here a large slag nodule has broken in half, revealing its interior texture. At the archaeological site of Ngre Kataa, large chunks of 'bubbly' slag like this were occasionally found in household and other contexts, away from areas otherwise associated with metal-working activities. Potters at the time of the site's occupation had begun to use crushed iron slag as a tempering agent in their potting clays, which may explain why large nodules were being carried and cached in areas away from metal-working locations. Ngre Kataa, June, 2008.
Iron slag is formed as a byproduct of iron smelting. Here a large slag nodule has broken in half, revealing its interior texture. At the archaeological site of Ngre Kataa, large chunks of 'bubbly' slag like this were occasionally found in household and other contexts, away from areas otherwise associated with metal-working activities. Potters at the time of the site's occupation had begun to use crushed iron slag as a tempering agent in their potting clays, which may explain why large nodules were being carried and cached in areas away from metal-working locations. Ngre Kataa, June, 2008.
Insitu pottery and iron artifacts associated with clusters B and C of what archaeologists interpret as a shrine (clusters A-D) which capped stratified deposits in a metallurgical workshop. Far left in unit 48N 10W, the flat surface of an anvil/grinding stone (GS 09-32) is exposed, to the left (west) of which a poorly preserved portion of an elephant tusk was found (now removed). To the right (east) of the large stone is Cluster B, which includes the group of sherds seen in the vertical exposure in front and left (west) of the tree stump. Behind the tree stump is a large cluster (C) of pottery lids, partial pots and iron objects. Photo scale marked in 5 cm increments. View looking towards northwest. Site Ngre Kataa. 10 June 2009.
Insitu pottery and iron artifacts associated with clusters B-D of what archaeologists interpret as a shrine (clusters A-D) which capped stratified deposits in a metallurgical workshop. Bottom left, at the base of a balk supporting the unit peg, is cluster D, comprised of two stones flanking an iron disc, laid flat (SF 09-158), and a tri-looped iron bangle (SF 09-159). In front and left (east) of the tree stump is a large cluster (C) of pottery lids, partial pots and iron objects, including an iron bangle (SF 09-148) and a pair of miniature iron manacles (SF 09-171, "B"-shaped object). To the right (west) of the tree stump, another cluster of pottery and iron objects can be seen. Top right of the photo, a yellow notebook rests on top of an anvil/grinding stone (GS 09-32), next to which rested a poorly preserved section of an elephant ivory tusk. North arrow photo scale marked in 5 cm increments, arrow pointing north. View looking towards southwest. Site Ngre Kataa. 10 June 2009.
An iron artifact (SF 09-031) recovered from screened soil taken from the southern end of excavation unit 50N 2W where two large boulders used as anvil/grinding stones were located. In the unit's northwest corner was a burned feature interpreted as the remains of a forge in an area where metalworking took place. The flat iron object is pointed on one end and has two rounded lobes at the other, perhaps to facilitate turning (like a key?). Its function is unknown. The object has been corroded by rusting. Scale in cm. Length: 5.7 cm. Weight: 9.3 g. Site Ngre Kataa. 30 May 2009.
View across open excavations in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The photo centers on units 46N 8W (foreground) and the southern half of 48N 8W, the north wall of which (at 47N) can be seen behind the sign board. The exposed areas were excavated in 2008 and the photo taken in preparation for 2009 excavations. Traces of circular burned features, red-orange and yellow in color, can be seen in the freshly scraped surface of these units. The uppermost north arrow sits to the right (east) of the circular outline of a still-buried everted-rim jar. Another everted-jar rim can be seen exposed in the north wall at 47N. This rim and associated artifacts formed cluster B, part of a larger shrine feature (clusters A-D) that extended across the northern half of unit 48N 8W (beneath and behind the small tree trunk visible above and left of the sign board). Cluster A (unit 46N 8W) comprised a large pottery bowl surrounded by six iron bangles that was removed in 2008. It was positioned above and slightly west (left) of the burned feature (center photo) that is intersected by a tree root. Cluster B included the artifacts seen here in the north wall at 47N, together with an associated cluster of a pedestal-handled pot lid, dog skull and jaw bones revealed by further excavation beneath and west (left) of the tree stump. In the upper right of the photo (north and east), insitu anvil (GS 09-15, left) and grinding (GS 09-12, right) stones are visible in unit 50N 6W. Photo scales marked in 5 cm increments and measuring tape marks 2 m. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Insitu pottery and iron artifacts associated with clusters C and D of what archaeologists interpret as a shrine that capped stratified deposits in a metallurgical workshop. Cluster D appears in the foreground, left, below unexcavated soil remaining around the 48N 8W unit peg. Here two small stones flank a flat iron disc (SF 09-159, left) and a tri-looped iron bangle (SF 09-158, right). Cluster C is a large grouping of pottery and iron objects located north of the tree stump, center photo. Included were several whole pottery lids, a broken but mostly complete jar associated with an iron bangle (SF 09-148) and a pair of miniature iron manacles (SF 09-171). The bangle is visible, resting on a soil pedestal in front of the tree trunk's center. In the photo's upper right, a large anvil stone (GS 09-32), on which sits a yellow notebook, is visible. Flanking this stone on its western edge was a portion of an ivory tusk. Photo scale marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 10 June 2009.
Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Center photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. At center photo, bottom, a pot lid with a strap handle (NK 09-382) rests on its side. To the right of the north arrow, portions of an another pedestal-handled pot lid lie with its interior oriented upward. Photo scale at upper right marked in cm. Arrow pointing north. Site Ngre Kataa. 10 June 2009.
Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Lower center of the photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. Photo scale marked in cm. View looking south. Site Ngre Kataa. 10 June 2009.
Excavation of a shrine cluster, two images. The image on left shows a pottery cluster, first exposed in June 2008, as it appeared on 10 June 2009. At bottom center of this image is a pedestal base, above which is a tight cluster of rim sherds. The curved sherd on the far right in this image is the outer edge of the pedestal-handled lid, which is fully exposed in the photo on the right, taken on 16 June 2009. A dog skull in a highly friable state is visible above and to the right of this lid in both photos. In the imgae on the right, an iron bangle (SF 09-219) can be seen resting in an angled position, below and left of which is a dog mandible. These were uncovered by excavation below and behind the pedestal base seen in the picture on the left. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 and 16 June 2009.
An iron bangle (SF 09-132) made from a flattened iron rod with overlapping ends. One end of the bangle is bent inward. The bangle occurred as an isolated find in the upper levels of an area (mound 6) that archaeologists interpret as a metallurgical workshop. The bangle has been corroded by rusting. Scale in cm. Width: 7.9 cm. Weight: 25.6 g. Site Ngre Kataa. 6 June 2009.