Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Center photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. At center photo, bottom, a pot lid with a strap handle (NK 09-382) rests on its side. To the right of the north arrow, portions of an another pedestal-handled pot lid lie with its interior oriented upward. Photo scale at upper right marked in cm. Arrow pointing north. Site Ngre Kataa. 10 June 2009.
Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Lower center of the photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. Photo scale marked in cm. View looking south. Site Ngre Kataa. 10 June 2009.
Insitu pottery and iron artifacts associated with clusters B and C of what archaeologists interpret as a shrine that capped stratified deposits in a metallurgical workshop. Cluster B encompassed the objects on the south (right) side of the photo, west of (below) the tree stump. To the right of the black-and-white photo stick (lower right) is an iron spike (SF 09-174), a half bangle (SF 09-173) and a slightly curved iron disc (SF 09-172) in a carefully placed composition. Immediately to the east (above in the photo), an aglomeration of pottery sherds is stacked. Later excavation revealed a pedestal-handled pottery lid, dog skull and jaw bones carefully placed below these sherds in cluster B. Cluster C encompassed the artifacts to the north (left) of the tree stump. These included a series of pottery lids, portions of single pottery jar and sherds from other pots. An iron bangle (SF 09-148) is visible above and slightly left of the top photo scale, sitting adjacent to a pottery lid (NK 09-381) lying with its interior surface up. This wider shrine assemblage overlaid burned features associated with metalworking activities. Black-and-white photo scale in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 10 June 2009.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 20. The jar was located in the west profile wall of the unit. The jar has a carinated shoulder and a rounded base. A single horizontal line of wavy line impression was applied to the neck constriction, with the area above the carination otherwise plain. The base of the jar is surface treated with a fiber (perhaps braided strip) roulette. Two roughly parallel horizontal grooved lines are superimposed over the roulette treatment. Whole pot. Rim diameter 17.5 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 3 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 20, W Wall.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also finely crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known source group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also fine crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 15, South Wall
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, Levels 4-5. The jar (Vessel 3) was found sitting upright in association with a cluster of several other complete and broken pots (Vessels 1 & 2) in what has been interpreted as a kitchen area. Most of the jar has been surface treated with a twisted cord roulette. Single pendant grooved lines surround the circumference of the jar. A total of five circular impressions, perhaps made with a hollow reed, are placed below the intersection points of the pendant grooves. A hole in the base of the pot (ca. 7 cm across) may have been deliberately broken in this otherwise whole pot. Rim diameter: 17.5 cm at exterior lip. Site Ngre Kataa ("Banda 40"). 3 April, 2001.
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, Levels 4-6. The jar (Vessel 2) was found sitting upright in association with a cluster of several other complete (Vessels 1 & 3) and broken pots in what has been interpreted as a kitchen area. The upper surface of the round-based jar is undecorated. In a zone bounded by double grooved lines, the base and lower surface of the jar is surface treated with maize cob roulette. Groups of three circular punctates mark the spots where gooved lines meet. A hole in the base of the pot (4 x 3.5 cm) may have been deliberately broken in this otherwise whole pot. Rim diameter: 20.5 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 4 March, 2001.
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 16. The undecorated exterior surface of the round-based jar is orange-brown from firing, with areas of black fire-clouding. Roughly 30% of jar is represented. Rim diameter: 21 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 28 March, 2001.
Photo of an everted-rim pottery jar (Vessel B) excavated from Kuulo Kataa, Mound 101, Unit 2W 2S, levels 6-7, where the jar was positioned upright. A broken pedestal base (Vessel A, originally part of another vessel) sat atop the jar. The jar has a carinated shoulder and a rounded base. Above the carination, the jar's exterior surface is decorated with four horizontal grooved lines, between which are lines of dentate impression. Immediately above the carination in three locations around the vessel's circumference are triangular clusters formed by three circulate punctates joined by short grooved lines enclosing dentate impressions. In a zone marked by two parallel grooved lines, the jar's base is surface treated with carved routlette impressions. Rim diameter 20.8 cm at interior lip. Vessel height (base to rim) 15.8 cm. Photo scale in cm. Kuulo Kataa, 9 June, 1995.
Photo of a pottery bowl rim, interior view, with profile depicted (left). The shallow bowl's flattened rim is decorated with intersecting red painted lines, and the interior surface with zones of red paint. A narrow band of red paint appears on the external lip of the bowl, which has an otherwise plain exterior surface. An INAA sample ("Banda 27-7") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 26 cm at the interior lip. Sherd represents an estimated 12% of the bowl's circumference. Scale in cm. Site Banda 27. 27 January, 2001.
Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.