Photo of a pottery bowl rim, interior view, with profile depicted (left). The shallow bowl's flattened rim is decorated with intersecting red painted lines, and the interior surface with zones of red paint. A narrow band of red paint appears on the external lip of the bowl, which has an otherwise plain exterior surface. An INAA sample ("Banda 27-7") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 26 cm at the interior lip. Sherd represents an estimated 12% of the bowl's circumference. Scale in cm. Site Banda 27. 27 January, 2001.
Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
An insitu anvil stone (GS 08-25) is surrounded by several fragmentary and one complete pottery vessel (NK08-407) in an area that archaeologists interpret as a metallurgical workshop. At the top and center (southeast) is a cluster of sherds from a broken pot and a piece of a tuyere. In the lower right, to the west of the anvil stone and framed by photo scales, is a circular burned feature (Feature 2) with an outer ring of oxidized red sediment (Munsell 2.5YR 5/6) and a yellowish red (Munsell 5YR 4/6) center. Features similar to this appeared across this workshop area and may have been created by exposing rounded base containers to high heat. A yellow glass bead (SF 08-234) was found in the fill of a shallow feature characterized by ashy soil and charcoal located immediately south (lower right) of the burned feature. Black-and-white photo scale marked in 5 cm increments. View looking southeast. Site Ngre Kataa. 8 July 2008.
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. At the base of the photo, center, is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north; above the photo scale) is a small coiled iron bangle made from a flattened piece of iron (SF NK 08-182). A smaller bangle-like artifact lies directly above the pot, center photo (north; SF 08-139). This area (cluster A) was part of a larger cluster (clusters A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View from above, north at top of photo. Photo scale in cm increments. Site Ngre Kataa. 9 July 2008.
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the trunk of a small tree is visible, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. Center photo, flanked by photo scales, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Looking eastward over excavation unit 48N 10W toward unit 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop, a series of anvil/grinding stones have been left in place and a burned feature exposed. Foreground, right, a large anvil stone (GS 09-33) rests atop another stone (GS 09-34). To the right (south), the circular rim of an everted-rim jar has been left in place. To the left (north) is a zone of darker ashy soil flecked with charcoal. Center photo is an anvil stone (GS 09-32), against which a partial elephant tusk--now removed--was found resting. Behind this stone is a tree root and base of a tree stump. The area from this stone (GS 09-32) and extending beyond the stump had been covered with artifacts (clusters B-D, now removed) that archaeologists interpret as a large shrine feature. Some of these artifacts were superimposed directly over the amorphous orange-red burned feature (center photo), which was likely created by high heat associated with forging metals. Other smaller stones have been left in place across the unit. Photo scales marked in 5 cm increments, arrows pointing north. Site Ngre Kataa. 4 July 2009.
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units (where the trunk of a small tree is visible, above left of the sign board). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. The everted rim of a pottery jar visible in the north wall of the excavation unit (top left) was part of an adjacent cluster (B) that also included iron bangles (SF 08-183 & 184). Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
View looking northward of early stage excavations at mound 6, Ngre Kataa, an area that archaeologists interpret as a metallurgical workshop. Center view is of units 42-48N 4W. In foreground, excavations in units 42N 4W and 44N 4W ave exposed clusters of pottery, a grinding stones, tuyeres and an area of burned soil associated with metal working. Foreground, bottom right, are a partial pottery jar (NK 08-520) and to its right (east) a small flat grinding stone (GS 08-12; ). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. A whole pottery vessel sit at a slightly lower level (NK 08-406) a short distance away (south east). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Excavations in the adjacent unit (46N 2W) in 2009 revealed a perforated shrine pot resting at a slightly lower level next to these stones. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 5 July 2008.
Excavations on the south edge of unit 44N 4W have exposed a cluster of insitu pottery and a tuyere fragment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Foreground, broken pieces of a pottery jar lie with their exterior surfaces facing down. Behind them and left rests a tuyere fragment (NK 08-284), its circular cross-section visible in front of the sign board. To the right (west) of this cluster is an area of dark reddened soil, one of many examples of burned soil in this area where metals were worked. This diffuse area of reddened soil extended underneath the sherd cluster, center photo. To the right, embedded in the balk behind the north arrow (to its south), the tip of a partial iron point (SF 08-159) is visible (right of the circular patch of dark soil). Photo scale in front marked in cm. Arrow pointing north. Site Ngre Kataa. 10 July 2008.
An arc of orange-red burned features is being revealed by excavations in units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the everted jar rim is visible in the north wall, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 16 July 2008.
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (center), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). These objects are surrounded by broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. View looking south. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (upper right), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). To the right of this, surrounded by moistened soil, the edge of a large grinding stone (GS 09-32) is visible. Surrounding these objects are broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. Arrow pointing north, view from above. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
An area of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Left, back (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units. The everted jar rim visible in the north wall of the excavation (upper right) was part of this wider set (cluster B). The base of these clusters was about 20-30 cm above the burned basins exposed in this photo, which were likely associated with metal forging. Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the north of the burned features (right, foreground), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Gathered around a table in the Banda Cultural Centre's exhibit hall during a workshop to gauge student interest in learning from heritage resources, University of Ghana Education PhD student Esther Attiogbe talks with a group of Junior High School girls about how women in the area made pottery from locally available clays. The photos of local pottery-making laid out on the table are ones included in the Banda Through Time repository. On shelves behind them are examples of pottery excavated from archaeological sites around the area. Banda Cultural Centre, Ahenkro, 25 June, 2019.
Gathered around a table in the Banda Cultural Centre's exhibit hall during a workshop to gauge interest in using local heritage resources to support classroom learning, several Banda area Junior High School teachers look at images included in the Banda Through Time digital repository. On shelves behind them are examples of pottery excavated from archaeological sites around the area. Banda Cultural Centre, Ahenkro, 26 June, 2019.