Search Constraints
You searched for:
Subject(s)
archaeology
Remove constraint Subject(s): archaeology
Subject(s)
pottery
Remove constraint Subject(s): pottery
Genre
digital image
Remove constraint Genre: digital image
« Previous |
1 - 10 of 38
|
Next »
Number of results to display per page
Search Results
- Description:
- Banda Research Project team members Amanda Logan (right) and Amy Groleau (left) draw a plan map of units 44N 4W and 44N 6W, Mound 6, Ngre Kataa. They map in situ artifacts and features, including several large grinding stones, a whole pot, pottery clusters and a tuyere fragment. Wooden stakes mark the corners of 2 x 2 meter excavation units. A photo scale place near a partially exposed everted rim jar in unit 44N 6W (NK-08-407) is in 5 centimeter increments. Ngre Kataa, 7 July, 2008.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6
- Date:
- 2008-07-07
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Mapping; Grinding stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008-07-07
- Date searchable:
- 2008
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- People Facet:
- Dr. Ann B. Stahl
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Boase Chief Tolԑԑ Ligbi Wulotei (center) looks at pottery from Banda area archaeological sites while Banda Project team member Boye (far right) looks on. Banda Cultural Centre, Ahenkro, 15 July, 2011.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Location(s) Facet:
- Ahenkro
- Subjects:
- Banda Cultural Centre; Community engagement; Community event
- Subjects Facet:
- Archaeology; Heritage; Pottery
- Creator:
- Dr. Ann B. Stahl
- Contributors:
- Dr. Ann B. Stahl
- Date searchable:
- 2011
- Date searchable:
- 2011-07-15
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ahenkro;8.165961, -2.354312
- People Facet:
- Dr. Ann B. Stahl
- Geographic Coordinates:
- 8.165961, -2.354312
- Description:
- Side view of a broken pottery sherd with a large slag inclusion. The use of crushed slag as a tempering material included in potting clay is first seen in pottery associated with Ngre phase sites in the Banda area. The use of crushed slag as a temper intensifies during Kuulo phase times, after which it becomes uncommon. Ngre Kataa, June, 2008.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 8, Unit 8N 127E, Level 9
- Date:
- 2008-06-24
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Slag
- Subjects Facet:
- Archaeology; Pottery; Pottery making; Artifacts (Antiquities)
- Identifier:
- NK08-046
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008-06-24
- Date searchable:
- 2008
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Several grinding stones, a whole pot and a cluster of pottery sherds have been exposed in situ at the base of level 3, unit 44N 4W at Mound 6, Ngre Kataa. The large grinding stone in the foreground (grinding stone 1, NK-08-112) is oriented with its grinding surface facing down. Another smaller stone rests on a soil pedestal created as archaeologists excavated surrounding soil to a lower level. Upper right, a whole pottery jar (NK-08-176) sits next to a large grinding stone (grinding stone 3, NK-08-173) oriented with its grinding surface up. To the far left, above the photo scale in centimeters, archaeologists have exposed the edges of a pottery jar, broken in half and lying on its side. As excavations extended into the adjacent unit (42N 4W, to the left), this broken pot was found to be associated with two tuyere fragments. This cluster of grindstones, tuyeres and nearby burned features is interpreted as part of a larger metal-working workshop, the activities of which led to the build up of mound 6. The soil on the right side of the unit is darker because it is moister than that on the left. View to west. Site Ngre Kataa. 1 July, 2008.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17601 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
- Provenance:
- Ngre Kataa, Mound 6, Unit 44N 4W, level 3
- Date:
- 2008-07-01
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Tuyere
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Metalworking
- Identifier:
- Catalog numbers NK-08-112, 08-176 and 08-173
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008-07-01
- Date searchable:
- 2008
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- People Facet:
- Dr. Ann B. Stahl
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17593
- Provenance:
- Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
- Date:
- 2009-06-29
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Burned basin
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009-06-29
- Date searchable:
- 2009
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- People Facet:
- Dr. Ann B. Stahl
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17594
- Provenance:
- Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
- Date:
- 2009-06-29
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Burned basin
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009-06-29
- Date searchable:
- 2009
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- People Facet:
- Dr. Ann B. Stahl
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Coverage:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102 ;
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 4, 97-105 cm bd
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Jar
- Subjects Facet:
- Pottery; Archaeology; Artifacts (Antiquities)
- Identifier:
- NK 09-787
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Commentary:
- Composite photo made using Adobe Photoshop 2020
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
- Date:
- 2009-06-24
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-24
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- « Previous
- Next »
- 1
- 2
- 3
- 4