Number of results to display per page
Search Results
81. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009
- Description:
- A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
- Date:
- 2009-06-02
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-02
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
82. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009
- Description:
- The southeast corner of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop (mound 6). An anvil stone (top of photo; GS 09-06) is pedestaled insitu in the adjacent excavation unit (48N 0W). This stone was found immediately below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Stadia rod numbered intervals of 10 cm. View looking south. Site Ngre Kataa. 9 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19117
- Provenance:
- Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
- Date:
- 2009-07-09
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-09
- Genre Facet:
- Digital image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
83. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009
- Description:
- A boulder used as an anvil stone (GS 09-01) sits insitu in an excavated area interpreted as a metallurgical workshop. This was one of several boulders associated with burned features and other residues of metalworking. The boulder's upper surface showed signs of use wear and its south-facing side is marked by a deep cup-shaped depression that resulted from repeated use. A burned feature interpreted as the remains of a forge is visible behind the anvil stone (upper left) in the northwest corner of excavation unit 50N 2W. Flat photo scale in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
- Date:
- 2009-06-01
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-01
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
84. Insitu grinding stone and jar, mound 6, Ngre Kataa, 2008
- Description:
- View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19128
- Provenance:
- Ngre Kataa, Mound 6, Unit 44N 4W, Level 3
- Date:
- 2008-07-01
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Jar
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-01
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
85. Insitu anvil/grinding stones, Ngre Kataa, 2008
- Description:
- A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596
- Provenance:
- Ngre Kataa, Mound 6, Unit 46N 4W, Level 3
- Date:
- 2008-07-03
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Anvil stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-03
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
86. Burned feature and stone hammer, Ngre Kataa, 2008
- Description:
- A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
- Provenance:
- Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
- Date:
- 2008-07-05
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-05
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
87. Insitu grinding stone, Ngre Kataa, 2008
- Description:
- A large grinding stone (GS 08-04) rests insitu along the south edge of unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone's visible surface is concave in profile, a result of use. The surface that is oriented face down exhibited greater wear from grinding. The white marks on the stone's upper surface were created by excavators' tools as they dug. A piece of copper alloy rod (greenish in color, SF 08-53) is visible insitu in soil below the center of the grindstone. Root fragments are seen in the surrounding soil. Photo scale in cm. View looking south. Site Ngre Kataa. 1 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19130
- Provenance:
- Ngre Kataa, Mound 6, Unit 48N 4W, Level 4
- Date:
- 2008-07-01
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Copper alloy
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-01
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
88. In situ pottery, anvil and grinding stones, Ngre Kataa, 2008
- Description:
- Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19138
- Provenance:
- Ngre Kataa, Mound 6, 44N 6W, 70 cm bd
- Date:
- 2008-07-05
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone; Jar
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-05
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
89. In situ pottery and grinding stones, Ngre Kataa, 2008
- Description:
- Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
- Provenance:
- Ngre Kataa, Mound 6, 42-46N 4W, Level 2
- Date:
- 2008-07-05
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Anvil stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-05
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
90. Pottery bowl and iron bangles, Ngre Kataa, 2008
- Description:
- The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19144; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19147; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
- Provenance:
- Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
- Date:
- 2008-07-09
- Location(s) Facet:
- Ngre Kataa;8.11277778, -2.30611111
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-09
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;
- Coverage-Temporal:
- Ngre Kataa
- Geographic Coordinates:
- 8.11277778, -2.30611111