Search

Start Over Subject(s) pottery Date 2009

11. Clay smoking pipe, Ngre Kataa, 2009

Description:
A short-stemmed, locally made clay smoking pipe, 2 views (bottom: view from side with pipe bowl to the left; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's bowl has a flared pedestal base, the bottom of which shows signs of abrasion. Above its base, the pipe bowl is decorated with a zone of criss-cross incisions demarcated by two horizonal incisions (one above and one below). The bowl's rim is missing. Its stem joins the bowl above its base (a "double-angled" form). The stem flares somewhat toward its lip which is flattened. Photo scale in cm. Site Ngre Kataa. 27 May, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 28E, Level 5
Date:
2009-05-27
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF NK 09-008
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-27
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

12. Partial pottery vessel, Ngre Kataa, 2009

Description:
Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102;
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4, 97-105 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Jar
Subjects Facet:
Pottery; Archaeology; Artifacts (Antiquities)
Identifier:
NK 09-787
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

13. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

14. Burned features, unit 46N 2W, Ngre Kataa, 2009

Description:
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

15. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Coverage:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

16. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

17. Insitu anvil/grinding stones and burned feature, Ngre Kataa, 2009

Description:
Looking eastward over excavation unit 48N 10W toward unit 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop, a series of anvil/grinding stones have been left in place and a burned feature exposed. Foreground, right, a large anvil stone (GS 09-33) rests atop another stone (GS 09-34). To the right (south), the circular rim of an everted-rim jar has been left in place. To the left (north) is a zone of darker ashy soil flecked with charcoal. Center photo is an anvil stone (GS 09-32), against which a partial elephant tusk--now removed--was found resting. Behind this stone is a tree root and base of a tree stump. The area from this stone (GS 09-32) and extending beyond the stump had been covered with artifacts (clusters B-D, now removed) that archaeologists interpret as a large shrine feature. Some of these artifacts were superimposed directly over the amorphous orange-red burned feature (center photo), which was likely created by high heat associated with forging metals. Other smaller stones have been left in place across the unit. Photo scales marked in 5 cm increments, arrows pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19171
Provenance:
Ngre Kataa, Mound 6, Units 48N 10W, 48 N 8W, Level 4
Date:
2009-07-04
Location(s) Facet:
8.11277778, -2.30611111
Subjects:
Anvil stone; Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

18. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (center), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). These objects are surrounded by broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. View looking south. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19160; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19163; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19165; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19166
Provenance:
Ngre Kataa, Mound 6, 48N8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Bangles; Ornaments; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

19. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (upper right), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). To the right of this, surrounded by moistened soil, the edge of a large grinding stone (GS 09-32) is visible. Surrounding these objects are broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. Arrow pointing north, view from above. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19164; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19159
Provenance:
Ngre Kataa, Mound 6, 48N8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Bangles; Ornaments; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111