Search

Start Over Subject(s) archaeology Date 2009

41. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

42. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

43. Burned features, unit 46N 2W, Ngre Kataa, 2009

Description:
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

44. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:
Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:
2009-06-23
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

45. Iron projectile point fragment, Ngre Kataa, 2009

Description:
Partial iron projectile point, the tip of the head (left) broken off. The base of the head forms a right angle barb with the short tang. The tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood to form an arrow. This point was found in an area (mound 7) that archaeologists interpret as a house mound. The artifact is corroded by rust. Scale in cm. Length: 9.1 cm. Weight: 13.6 g. Site Ngre Kataa. 4 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 8
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-114
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

46. Iron disc, Ngre Kataa, 2009

Description:
Flat, thin iron disk (SF 09-159). The object is corroded by rust and its edges notched in two spots. Its function is unknown. The disc was found in a cluster (cluster D) with an iron bangle (SF 09-158) and two stones whose surfaces showed evidence of grinding. The cluster was part of a wider feature (clusters A-D) that archaeologists interpret as a shrine, which overlaid stratified deposits in a metallurgical workshop (mound 6). Scale in cm. Width: 8.1 cm. Thickness: .2 cm. Weight: 29.8 g. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19101
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 194 cm S, 4 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 09-159
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

47. Tri-looped iron bangle, Ngre Kataa, 2009

Description:
A tri-looped iron bangle (SF 09-158). The bangle was formed from a single round iron rod, looped three times at the top (detail, left). The rod is joined with a single twist at the base, with each end of the rod overlaid by a thin iron strap (bottom), causing slight thickening on either side of the twisted base. The bangle was found in close association with a flat iron disc (SF 09-159) and two stones whose surfaces showed evidence of grinding (cluster D). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.5 cm. Weight: 30.2 g. Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 195 cm S, 22 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-158
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

48. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Coverage:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

49. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

50. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A pottery lid (NK 09-626) is positioned vertically with its interior surface facing south. Above it (slightly right) is a poorly preserved, friable dog skull. A large tree root has been truncated above and left of the pot lid. Beneath the lid is an iron bangle (SF 09-219), angled upward. The bangle is pressed up against a dog mandible, which has been placed at a diagonal angle below the pot lid, its mandibular joint oriented upward. Several teeth remain in the mandible. A burned feature can be seen immediately below this assemblage of objects. This cluster (B, 11) was part of a larger set of clusters (A-D) that archaeologists interpret as a shrine in a metallurgical workshop. Photo scale at top in cm. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 4-5, Cluster 11
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Ornaments; Bangles; Dogs; Shrines; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111