Search

Start Over Subject(s) archaeology Date 2009

31. Excavated burned basins, unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned basin-shaped features is exposed in the northwest corner of unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). The basins comprised a thin layer of fire-hardened sediment, red to dark red (Munsell colors 2.5 YR 3/6 & 4/8) in color. Basin features 1 (top right) and 2 (left of feature 1) measured about 8-9 cm deep and were filled with ashy soil. Basin feature 5 (far left) was shallower. Its fire-hardened surface showed a pinkish tinge. Samples of burned basin matrix from features 1 and 5 yielded thermoluminescence (TL) age estimates of 1500 +/- 40 CE (feature 1; Univ. Wash. 2455) and 1580 +/- 40 CE (feature 5; Univ. Wash. 2456). Photo bar marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 29 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-29
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

32. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Two stones showing evidence of use as grinding stones sit nearby, a north arrow placed by one(GS 09-10; center photo) and one in the southwest corner of the excavation unit (GS 09-08; bottom right). Another insitu anvil stone (GS 09-6) sits in the northeast corner of an adjacent excavation unit (48N 0W; top right of photo). The narrow band of loose soil angled across the southwest corner of the excavation was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19119
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

33. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-01) sits insitu in an excavated area interpreted as a metallurgical workshop. This was one of several boulders associated with burned features and other residues of metalworking. The boulder's upper surface showed signs of use wear and its south-facing side is marked by a deep cup-shaped depression that resulted from repeated use. A burned feature interpreted as the remains of a forge is visible behind the anvil stone (upper left) in the northwest corner of excavation unit 50N 2W. Flat photo scale in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

34. Anvil stones in a metallurgical workshop, mound 6, Ngre Kataa, 2009

Description:
Excavations uncovered three insitu boulders placed in a row that were used as anvil stones in an area interpreted as a metallurgical workshop. Multiple surfaces of the boulders show signs of wear caused by hammering and grinding. Repeated use of the anvil stone in the foreground (GS 09-03) has created a clear depression on its upper surface and its left side is flattened by wear. The middle anvil stone (GS 09-02) has multiple depressions created by use on its upper surface. The anvil in the rear of the photo (GS 09-01) shows wear on its top and side surfaces, with dirt still embedded in a deep cup-shaped depression on its south-facing side in this photo. To the east (right) of the boulder in foreground, the flat surface of a grinding stone (GS 09-04) is visible in the east wall of the excavation unit. A broken pedestal base of a pot sits on its side to the east (right) of the middle anvil stone. In the upper left corner of the photo, a burned feature interpreted by archaeologists as the remains of a forge has been exposed. The red-and-white band above the photo sign is a two meter scale, marked in 10 cm increments. View looking north across two exavation units: 50N 2W (top of photo) and 48N 2W (bottom of photo). The 2x2m units have been excavated to slightly different depths. Site Ngre Kataa. 1 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19121; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19181; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19182
Provenance:
Ngre Kataa, Mound 6, Units 48N 2W and 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

35. Iron disc, Ngre Kataa, 2009

Description:
A flat, thin iron disk. The object is corroded by rust. Its function is unknown. The disc was found in close association with a large anvil or grinding stone and adjacent to a distinctive pottery vessel and a smaller, irregularly shaped piece of flat iron (SF 09-171). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 9.4 cm. Thickness: .2 cm. Weight: 49.3 g. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 134-140 cm S, 144-151 cm W, 100-107 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 09-370
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

36. 17-19103

Description:
A flat, irregularly shaped iron with circular depression. The object is corroded by rust and its original form and function are unknown. It was found in close association with a large anvil or grinding stone (GS 09-15), a circular iron disk (SF 09-370) and a distinctive pottery vessel (NK 09-787). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 5.7 cm. Thickness: .2 cm. Weight: 9 g. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 130-134 cm S, 152-155 cm W, 109-112 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 90-371
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

37. Partial pottery vessel, Ngre Kataa, 2009

Description:
Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102;
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4, 97-105 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Jar
Subjects Facet:
Pottery; Archaeology; Artifacts (Antiquities)
Identifier:
NK 09-787
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

38. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:
Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:
2009-06-23
Location(s) Facet:
8.11277778, -2.30611111
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

39. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:
The southeast corner of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop (mound 6). An anvil stone (top of photo; GS 09-06) is pedestaled insitu in the adjacent excavation unit (48N 0W). This stone was found immediately below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Stadia rod numbered intervals of 10 cm. View looking south. Site Ngre Kataa. 9 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19117
Provenance:
Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:
2009-07-09
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-09
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

40. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:
The south wall of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop. An anvil stone (GS 09-06; left of the sign board) is pedestaled insitu in the adjacent excavation unit (48N 0W). Other pedestaled grinding stones are visible to the right and behind the sign board. These stones were found just below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below the anvil stone. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Ashy lenses are visible in the south and west walls. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Width of unit: 2 meters. Site Ngre Kataa. 9 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19116
Provenance:
Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:
2009-07-09
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111