Photo of a pottery bowl rim and body, with profile depicted (left). The bowl's interior surface is decorated with lines of red paint applied in reticulate and pendant patterns. The rim of the bowl is slightly everted. A portion of the interior surface is blackened as an effect of firing. An INAA sample ("Banda 27-11") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 34 cm at exterior lip. Sherd represents an estimated 20% of the bowl's circumference. Scale in cm. Site Banda 27. 28 February, 2001.
Photo of a pottery bowl rim and body, exterior surface, with profile depicted (left). The rim of the bowl is slightly everted. The bowl's exterior is decorated with several bands of red paint, one applied below the angle of the rim, one mid-way down the bowl body, and one toward the base. Blackened areas of the exterior are a result of firing. An INAA sample ("Banda 27-11") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 34 cm at exterior lip. Sherd represents an estimated 20% of the bowl's circumference. Scale in cm. Banda 27. 28 February, 2001.
Photo of a pottery bowl rim, exterior surface, with profile depicted (left). The bowl is decorated with several shallow horizontal grooves above its angular carination. A row of vertical impressions marks the carination, below which is a zone of angled "dentate" impressions, bounded by a shallow groove at its lower edge. Traces of red paint appear on the upper portions of the bowl. An INAA sample ("Banda 27-1") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 20 cm at the interior lip. Sherd represents an estimated 15% of the bowl's circumference. Scale in cm. Site Banda 27. 29 January, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Banda 27, Mound 1, Unit 1, Level 3
Date:
2001-01-29
Location(s) Facet:
Site Banda 27
Subjects:
Dentate impression; Red paint; Bowl; Neutron Activation Analysis
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, levels 3-6. The jar (Vessel 1) was found upside-down, resting on its rim and in association with a cluster of several other complete (Vessels 2 & 3) and broken pots in what has been interpreted as a kitchen area. The round-based jar is decorated on its lower surface by faint twisted cord-roulette impressions. The zone of cord rouletting is separated from the undecorated surface above by three arching grooves or channels. Multiple small circular punctates mark the place where grooved lines meet. Whole pot. Rim diameter c. 30 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Photo of a dark brown pottery jar rim, neck and body, with profile depicted (left). The rim of the jar is everted in profile. Below the neck, the body of the jar is decorated with a carved roulette rolled across the surface to create a herringbone design. The zone of carved roulette impression is bounded by a horizontal shallow groove. A curvilinear groove cuts across the roulette impression. The ceramic fabric contained both laterite and white grit, as well as finely crushed iron slag. INAA analysis ("NA B-143-8") assigned this jar to the "K1" group, with the implication that it was likely made on the east side of the Banda hills. Rim diameter: 22 cm at interior lip. Sherd represents an estimated 25% of the circumference of the jar. Scale in cm. Site B-143. 14 March, 2001.
Photo of a red-painted and mica-slipped bowl rim, with profile depicted (left). Toward the lip, multiple horizontal bands of grooving and dentate (comb) impression are overlaid by red paint. Below this is a zone with horizontal lines of wavy line impression and grooving overlaid by a mica slip. The lower zone is red-painted. The ceramic fabric includes finely crushed white grit which includes some quartz. An INAA sample ("A94-8") was assigned to the "L" group, indicating that the bowl was made from clays mined west of the Banda hills. Rim diameter: 14 cm at the interior lip. Sherd represents an estimated 15% of the bowl's circumference. Scale in cm. Site A-94. 21 February, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site A-94, Mound 2, Unit 1, Level 6
Date:
2001-02-21
Location(s) Facet:
Site A-94
Subjects:
Wavy line impression; Dentate impression; Red paint; Mica slip; Bowl; Neutron Activation Analysis
Photo of the rim and shoulder of a large pottery bowl, with profile depicted (left). The bowl's exterior is decorated with a herringbone design, created by rolling a carved wooden roulette across its entire surface, except for a narrow band just below the bowl's lip. A single diagonal shallow groove was applied across the surface above the shoulder. An INAA sample (NA "A212-8") from this bowl was "unassigned" to a specific group of ceramic fabrics, lending no insight into where the bowl was made. Rim diameter: 20 cm at the interior lip. Sherd represents about 11% of the bowl's circumference. Scale in cm. Site A-212. 18 February, 2001.
Photo of an everted-rim jar. The round-based pot is decorated on its lower surface by maize cob impressions, created by rolling a kernel-less maize cob over the pot's surface. The top edge of the maize-cob-rouletted zone is marked by pendant grooves or channels. Small circular punctates mark the place where pendant grooved lines meet. A single grooved line offsets this decorated zone from an undecorated zone below the jar's neck. Whole pot. Scale in cm. Site A-9. 1 Feb. 2001.
Body sherds from a large jar. The exterior surface is decorated with bands of horizontal grooving, inside of which are bands of dentate (comb) impressions. Rows of dentate impression applied at an angle create a chevron design across the central zone. An overall red paint or slip finishes the surface. An INAA sample from this jar ("Banda 27-13") was assigned to the "K2" group of ceramic fabrics. It was therefore liked made from clays mined east of the Banda hills. Scale in cm. Site Banda 27. 1 March, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Banda 27, Mound 2, Unit 1, Level 16
Date:
2001-03-01
Subjects:
Red paint; Dentate impression; Jar; Neutron Activation Analysis
Photo of a buff-colored pottery bowl rim and carination, with profile depicted (left). The bowl is decorated with two shallow horizontal grooves, applied below the lip on the exterior surface. Below this is a band of shallow criss-cross incised lines, beneath which is a plain zone, followed by a more deeply incised band of criss-cross incisions, applied just above the exaggerated carination (angled shoulder). Based on patterned overlap in the criss-cross lines, the lines slanted upper left to lower right were made first, after which the lines slanted upper right to lower left were made. The exterior surface below the carination is undecorated. The ceramic fabric included some laterite grit as well as a small amount of finely crushed slag. An INAA sample from this bowl (NA "B143-2") was "unassigned" to a specific group, lending no insight into where the bowl was made. Rim diameter: 15 cm at interior lip. Sherd represents about 15% of the vessel's circumference. Scale in cm. Site B-143. 13 March, 2001.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Levels 5-6. The jar (Vessel 1) was located in the north profile wall of the unit, together with another vessel (Vessel 2).
The jar has a carinated shoulder and a rounded base. To the right and below the carination, a portion of the exterior surface has broken away. The upper area of the jar is decorated with three horizontal grooved lines, inbetween which are lines of dentate impression. Just above the carination is another line of dentate impression and a grooved line. To the left and right, on the upper side of the carination, sets of two triangular designs were applied, consisting of three punctates connected by two short grooved lines. The area inside the triangle is marked by crossed dentate impressions, forming an "X" inside the triangle. This design was repeated twice on the recovered portion of the jar. It was likely repeated a third time on the missing portion. Below the carination are two shallow horizontal grooves. The jar's base is smooth, with no surface treatment applied. Roughly 65% of the vessel was recovered. Rim diameter 25 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 5. The jar (Vessel 2) was located in the north profile wall of the unit together with another vessel (Vessel 1). The jar has a carinated shoulder and a rounded base. The upper area of the jar is decorated with three horizontal grooved lines inbetween which are lines of dentate impression. The base of the jar is surface treated with a twisted cord roulette. Two roughly parallel horizontal grooved lines separate the cord rouletted zone from a plain zone below the carination. A hole in the base of the pot (ca. 7 cm across) may have been deliberately broken in this otherwise whole pot. Rim diameter 22 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 20. The jar was located in the west profile wall of the unit. The jar has a carinated shoulder and a rounded base. A single horizontal line of wavy line impression was applied to the neck constriction, with the area above the carination otherwise plain. The base of the jar is surface treated with a fiber (perhaps braided strip) roulette. Two roughly parallel horizontal grooved lines are superimposed over the roulette treatment. Whole pot. Rim diameter 17.5 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 3 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 20, W Wall.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also finely crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known source group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
A short-stemmed, locally made clay smoking pipe, 4 views (1: front; 2: side view, pipe bowl on left; 3: stem end; 4: top, looking into pipe bowl). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's straight-sided cylindrical bowl has a flat, circular base with traces of red pigment. The bowl's rim has broken away. The stem joins the bowl above the base (referred to as a "double-angled" form). The stem flares slightly outward toward its rim. The stem's lip shows traces of red paint. The pipe's surface is unevenly blackened. The bowl is decorated with incised lines. Two horizontal lines bound a zone of repeated "X" incisions marked by traces of red pigment. Photo scale in cm. Site A212. 18 February, 2001.
A short-stemmed, locally made clay smoking pipe, 4 views (bottom: pipe base; center left: view from side with bowl to right; center right: front of bowl; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe has a cylindrical bowl and lobed ("quatrefoil") base, the bottom of which shows signs of abrasion. On the base, vertical grooves mark the areas between lobes. Four horizontal gooves separate the base from a zone of vertical columns of diagonal impressions ("V"). Upper areas of the bowl are marked by another set of horizontal grooves. The bowl's rim is missing. Its stem joins the bowl at the base (a "single-angled" form). The cylindrical stem ends in a collar with a flat lip. The stem is decorated with two grooves line around its circumference. Photo scale in cm. Site A236. 23 March, 2001.
A short-stemmed, locally made clay smoking pipe, 3 views (bottom: pipe base; center: view from side with bowl to left; view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe has a cylindrical bowl and rounded base that shows extreme use-wear abrasion to that point that a hole has formed in the pipe's base. The bowl is decorated with two sets of horizontal incisions. Below the bottom set are several vertical incisions. Above the top set is faint overall dentate impression The bowl's rimis very abraded. The pipe's stem joins the bowl at the base (a "single-angled" form). The cylindrical stem ends in a rounded collar with a flat lip. Photo scale in cm. Site A236. 24 March, 2001.
A short-stemmed, locally made clay smoking pipe, 2 views (bottom: view from side with pipe's bowl on left; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's cylindrical bowl has a flared pedestal base which shows signs of wear/abrasion. The rim of the pipe bowl has broken away. The pipe's stem joins the bowl above the base (a "double-angled" form). The stem flares outward toward a flattened lip. The pipe's surface shows traces of overall red slip/paint. The pipe bowl is decorated with closely spaced rows of dentate impression. Soil adheres to the bowl's interior which was not washed after excavation. Photo scale in cm. Site A212. 17 Feburary, 2001.
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also fine crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 15, South Wall
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, Levels 4-5. The jar (Vessel 3) was found sitting upright in association with a cluster of several other complete and broken pots (Vessels 1 & 2) in what has been interpreted as a kitchen area. Most of the jar has been surface treated with a twisted cord roulette. Single pendant grooved lines surround the circumference of the jar. A total of five circular impressions, perhaps made with a hollow reed, are placed below the intersection points of the pendant grooves. A hole in the base of the pot (ca. 7 cm across) may have been deliberately broken in this otherwise whole pot. Rim diameter: 17.5 cm at exterior lip. Site Ngre Kataa ("Banda 40"). 3 April, 2001.