A group of four clay jars cool after being removed from the bonfire and dipped in bark solution. The solution carbonizes as it comes in contact with the hot surface of the pot, creating a glossy darkened surface that reduces the jar's porosity. A portion of one jar's rim has broken off during the firing and finishing process. Visible on the lower pot surfaces is the maize cob (bledjukaan in Nafaanra) roulette applied to create a roughened surface prior to firing. Shallow grooves used to decorate the upper surfaces are visible on the jar in the foreground. Pieces of bark from the bark solution adhere to the jars' surfaces. Bondakile, October, 1982.
Finished and dried clay pottery jars are carefully placed on top of firewood in preparation for firing. Previously fired broken or flawed pots are used to bank the fuel, keeping it in place. Additional fuel will be placed on top of the stacked pottery and the fuel set on fire. The resulting bonfire will be allowed to burn down, after which the pots will be removed and finished while hot by being dipped in a bark solution. Mensah Listowell, Research Assistant (blue shirt), stands by as the potters prepare to place more fuel on the stacked pottery. Bondakile, October, 1982.
A potter uses a pole to carry a hot clay jar from the smoldering bonfire (behind). She is carrying it to a pottery bowl that contains a solution of pounded bark into which she will dip the jar to create a finish. Newly fired pots are visible in the remains of the bonfire, lying on their sides. A row of upturned, previously fired but broken pots forms a bank around the bonfire's edge. Bondakile, October, 1982.
Potters place the pounded bark of specific trees (surom, layene, koko or lakroas they are known in Nafaanra) in water to create a solution used to finish pots. The red-colored solution carbonizes on the surface of hot pots just removed from the bonfire. Here, the prepared solution awaits as the pots are being fired. A plastic container floats on the surface. Bondakile, October, 1982.
A potter tends the bonfire in which clay pottery jars are being fired. She uses a long pole to adjust the grass fuel laid on top of the pots and the wood fuel beneath them. A bank of previously fired and broken pots holds the fire in place. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
The remains of a pottery-firing bonfire after the newly fired pots have been removed. Most of the jars visible here were fired prior to this bonfire. Broken or otherwise flawed, they were used to create a bank around the bonfire at its base. The bonfire's fuel has been reduced to an ash layer that remains in the center. Bondakile, October, 1982.
Sheep feed on the edges of a bonfire where clay jars are being fired. Grass has been laid as fuel over the carefully stacked pottery. Wood fuel lies beneath. At the bonfire's base, the broken pots used to bank the fire are visible. The fire will be allowed to burn down, after which the jars will be removed and, while still hot, dipped in a bark solution that coats the pot with a finish. Bondakile, October, 1982.
Dried clay jars are carefully placed on top of firewood in preparation for firing. Their surfaces have been textured by rolling a maize cob (bledjukaan in Nafaanra) over the jars' lower surface (maize cob roulette) and decorated with shallow arched grooves made when the pot was in a leather-hard state. Additional fuel will be placed on top of the stacked pottery before the fire is lit. After the fire has burned down the pots will be removed and finished by being dipped while hot in a bark solution. Bondakile, October, 1982.
As the bonfire burns down, a helper uses a long pole to prepare the newly fired clay pots for removal. The neatly stacked pots lie on their sides. Around the edges, a bank of previously fired and broken pots, some turned upside-down, were used to hold the fuel and pots in place as the bonfire was built. The bonfire burns rapidly, the firing process lasting between about 30 minutes to an hour. Bondakile, October, 1982.
With moistened hands, a standing potter smooths the rim of a partially finished clay jar. As she works, she moves clockwise around the wooden stump that supports the palette (kpankpa in Nafaanra) on which the pot is being molded. Bondakile, October, 1982.
A potter uses a draw-and-drag (direct pull) technique as she begins to mold the body and rim of a pottery jar from a lump of moist clay. The clay rests on a palette (kpankpa in Nafaanra) supported by a stump. She moves clockwise around the stump as she uses her hands to pull the clay upward and outward to form the walls of the pot. Bondakile, October, 1982.
This short Banda Heritage video made from still photographic images illustrates the potting techniques of Banda-area potters. It highlights the steps in their draw-and-drag forming method and the tools they use. Among the Nafana potters pictured in the video are Yaa Tenabrɛ, Adwoa Fodjoa, Peni Krah and Ama Donkor from Dorbour. Also pictured is a potter from Adadiem (1994) and an image from Bondakile (1982). Original images used to make the video are available in the Banda Heritage Repository. Dorbour, Adadiem, 1994. Bondakile 1982. Length: 5.05 minutes.
This short video made from still photographic images illustrates the firing techniques of Banda-area potters. It shows examples of bonfire firing and post-firing treatment of vessels in a solution of pounded bark. Images include a 1982 sequence following Mo potters in Bondakile and 1994 images of Nafana potters in Adadiem and Dorbour, featuring Afua Donkor and Yaa Nsiah Adiemu from the latter. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Adadiem, Dorbour, 1994. Length: 4.22 minutes.
Unfinished clay grinding bowls dry on the palettes (kpankpa in Nafaanra) on which they were formed. After they have dried to a leather-hard state, the potter will remove them from their palettes and score their interiors. The scoring creates a grinding surface used to process vegetables which are added to soups. These bowls may also serve as men's eating bowls (pԑԑ in Nafaanra). Immediately behind the drying bowls is a hearth, swept clean of ashes. Pottery jars can be seen drying in background, right. A chicken forages nearby. Bondakile, October, 1982.
A standing potter puts the finishing touches on the rim of a clay jar that she has molded using a draw-and-drag (direct pull) technique. She has finished the body, neck and rim of the jar and will now set it aside to dry. After it has dried to a leather-hard state, she will remove the jar from the palette (kpankpa in Nafaanra) on which it has been formed and she will add a rounded base. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. As she began she drew the moist clay upward and outward from the lump with which she started. Here she shapes the jar's neck and outward flaring rim. Before doing so, she has smoothed away finger marks created as she formed the jar's body. As she works, she moves around the stump that supports the palette on which the jar is being formed. Bondakile, October, 1982.
A potter has completed the draw-and-drag (direct pull) molding of a clay jar body and rim. The surface of the jar has been moistened and smoothed. It will be set aside to dry. Once it has dried to a leather-hard state, she will remove the partially finished jar from the palette (kpankpa in Nafaanra) on which she formed it and will add a rounded base using fresh, moist clay. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she has drawn the clay upward and outward with her hands. Here she begins to shape the form of the jar's neck and outward-flaring rim. As she works, she moves backwards around the stump that supports the palette (kpankpa in Nafaanra) on which the jar is being formed. Bondakile, October, 1982.
Clay pottery jars cool and dry after having been fired and dipped in a finishing bark solution. Once fully cooled, the jars will be stacked and stored before being sent to markets around the area. Jars like these (sro chͻ in Nafaanra) are used to prepare food, for example boiling yams and other tubers. To the right rear, wood is stored on a raised platform, awaiting use in cooking hearths. Bondakile, October, 1982.
A potter uses a metal spatula as she forms the neck area of clay jar which she has shaped using a draw-and-drag (direct pull) technique. The striations on the body of the jar were created by a maize cob (bledjukaan in Nafaanra) which she used to shape and smooth the pot's wall. These will be smoothed away as she continues to form the pot. She moves around the stump on which the pot rests as she works. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she draws the clay upward and outward from the center as she moves clockwise around the stump that holds the movable palette (kpankpa in Nafaanra) on which the jar is being formed. The fingermarks left as she pulls and thins the clay will be smoothed over as she continues to shape the jar. Bondakile, October, 1982.
A potter uses a maize cob (bledjukaan in Nafaanra) to smooth the surface of clay jar body that she is molding by a draw-and-drag (direct pull) technique. Beginning with a lump of moist clay, she has drawn the clay upward and outward, thinning the walls as she works. Here she moves clockwise around the stump that holds the palette (kpankpa in Nafaanra) on which the jar is being formed as she draws the maize cob up, pulling it towards her body. Bondakile, October, 1982.
A standing potter molds the body of a clay jar using a draw-and-drag (direct pull) technique. Here she uses a flat metal spatula to smooth the now-formed jar's exterior surface. She places the edge of her tool at the neck and makes downward strokes to create a smooth surface on the moist clay. As she works, she moves around the stump that supports the palette (kpankpa in Nafaanra) on which the jar is being formed. Bondakile, October, 1982.
This short video made from still photographic images shows how potters mine and process the clay they use to make pots. The video includes images of Mo potters in Bondakile and Nafana potters in Dorbour, including Yakosua. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Dorbour, 1994. Length: 2.25 minutes.
A young boy stands at the base of the clay pit where potters from Bondakile mine the clay they use for making pottery. Soils from upper and lower levels are mixed together to make a workable potting clay. Children help relatives who are potters to dig and process the clay. Two photos. Bondakile, October, 1982.
This short video made from still photographic images shows how Mo potters in Bondakile make clay jars using a draw-and-drag technique. The focus is on forming of the jar's body and rim. Original images used to make the video are available in the Banda Through Time Repository. Bondakile, 1982. Length: 2.59 minutes.
Potters and their helpers place hot clay jars, just removed from the bonfire, into a solution made from pounded tree bark. They use their long wooden poles to carry the pots to large pottery bowls containing the bark solution. They dip and turn the pot in the solution, allowing it to carbonize on the surface of the hot jar. This finishing step colors the jar's surface and makes its walls less porous which is said to improve its cooking performance. The remains of the bonfire, banked by previously fired broken pots, can be seen in the rear center. Four photos. Bondakile, October, 1982.
Surface next to the deep clay pit where potters form Bondakile mine the clay they use for making pottery. Piles of excavated clay surround the pit. Bondakile, October, 1982.
These partially formed clay jars (chͻ in Nafaanra) are drying, resting on the palette (kpankpa in Nafaanra) on which they were formed. Once dried to a leather-hard state, the potter removes them from the plate and, using fresh moist clay, adds a rounded base to the jar. To the left, a metal cooking vessel rests nearby. Bondakile, October, 1982.
A toddler girl wearing a protective strand of beads sits beside finished clay grinding bowls that have been set aside to continue drying before firing. The scoring on the interior of the bowl provides a rough surface against which cooked vegetables can be ground into a paste before being added to a soup. These bowls may also serve as men's eating bowls (pԑԑ in Nafaanra). Bondakile, October, 1982.