Search

Start Over Subject(s) excavations (archaeology) Location(s) ngre kataa

31. Insitu grinding stone and jar, mound 6, Ngre Kataa, 2008

Description:
View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19128
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, Level 3
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

32. Insitu anvil/grinding stones, Ngre Kataa, 2008

Description:
A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596
Provenance:
Ngre Kataa, Mound 6, Unit 46N 4W, Level 3
Date:
2008-07-03
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-03
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

33. Burned feature and stone hammer, Ngre Kataa, 2008

Description:
A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

34. Insitu grinding stone, Ngre Kataa, 2008

Description:
A large grinding stone (GS 08-04) rests insitu along the south edge of unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone's visible surface is concave in profile, a result of use. The surface that is oriented face down exhibited greater wear from grinding. The white marks on the stone's upper surface were created by excavators' tools as they dug. A piece of copper alloy rod (greenish in color, SF 08-53) is visible insitu in soil below the center of the grindstone. Root fragments are seen in the surrounding soil. Photo scale in cm. View looking south. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19130
Provenance:
Ngre Kataa, Mound 6, Unit 48N 4W, Level 4
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Copper alloy
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

35. In situ pottery, anvil and grinding stones, Ngre Kataa, 2008

Description:
Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19138
Provenance:
Ngre Kataa, Mound 6, 44N 6W, 70 cm bd
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone; Jar
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

36. In situ pottery and grinding stones, Ngre Kataa, 2008

Description:
Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:
Ngre Kataa, Mound 6, 42-46N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Anvil stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

37. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19144; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19147; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:
Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:
2008-07-09
Location(s) Facet:
Ngre Kataa;8.11277778, -2.30611111
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;
Coverage-Temporal:
Ngre Kataa
Geographic Coordinates:
8.11277778, -2.30611111

38. Anvil stone and burned feature, Ngre Kataa, 2008

Description:
An insitu anvil stone (GS 08-25) is surrounded by several fragmentary and one complete pottery vessel (NK08-407) in an area that archaeologists interpret as a metallurgical workshop. At the top and center (southeast) is a cluster of sherds from a broken pot and a piece of a tuyere. In the lower right, to the west of the anvil stone and framed by photo scales, is a circular burned feature (Feature 2) with an outer ring of oxidized red sediment (Munsell 2.5YR 5/6) and a yellowish red (Munsell 5YR 4/6) center. Features similar to this appeared across this workshop area and may have been created by exposing rounded base containers to high heat. A yellow glass bead (SF 08-234) was found in the fill of a shallow feature characterized by ashy soil and charcoal located immediately south (lower right) of the burned feature. Black-and-white photo scale marked in 5 cm increments. View looking southeast. Site Ngre Kataa. 8 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19137; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19142
Provenance:
Ngre Kataa, Mound 6, Unit 44N 6W, Feature 2
Date:
2008-07-08
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Tuyere
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery;
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-08
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

39. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. At the base of the photo, center, is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north; above the photo scale) is a small coiled iron bangle made from a flattened piece of iron (SF NK 08-182). A smaller bangle-like artifact lies directly above the pot, center photo (north; SF 08-139). This area (cluster A) was part of a larger cluster (clusters A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View from above, north at top of photo. Photo scale in cm increments. Site Ngre Kataa. 9 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19146; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:
Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:
2008-07-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

40. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A pottery lid (NK 09-626) is positioned vertically with its interior surface facing south. Above it (slightly right) is a poorly preserved, friable dog skull. A large tree root has been truncated above and left of the pot lid. Beneath the lid is an iron bangle (SF 09-219), angled upward. The bangle is pressed up against a dog mandible, which has been placed at a diagonal angle below the pot lid, its mandibular joint oriented upward. Several teeth remain in the mandible. A burned feature can be seen immediately below this assemblage of objects. This cluster (B, 11) was part of a larger set of clusters (A-D) that archaeologists interpret as a shrine in a metallurgical workshop. Photo scale at top in cm. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 4-5, Cluster 11
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Ornaments; Bangles; Dogs; Shrines; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111