Search Constraints
You searched for:
Location(s)
ngre kataa
Remove constraint Location(s): ngre kataa
Date
2009
Remove constraint Date: 2009
Number of results to display per page
Search Results
- Description:
- Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Workshop; Mound 6
- Subjects Facet:
- Handicraft; Metallurgy; Archaeology; Metalworking; Forging; Excavations (Archaeology); Iron; Copper alloys
- Creator:
- Dr. Ann B. Stahl
- Contributors:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-27
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- People Facet:
- Dr. Ann B. Stahl
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Iron projectile point. The head (left) is asymmetrical, perhaps the result of its base being broken. The intact side of the base is shouldered. Two small barbs protrude from opposite sides of the point's long tang (right). To make an arrow, the tang would have been inserted into a shaft made of bamboo, reed or lightweight wood. This point was found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The artifact has been corroded by rusting. Scale in cm. Length: 10.1 cm. Weight: 8.9 g. Site Ngre Kataa. 4 June, 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 3
- Date:
- 2009-06-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Iron tool
- Subjects Facet:
- Projectile points; Iron; Archaeology; Artifacts (Antiquities)
- Identifier:
- SF 09-110
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-04
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Iron projectile point with an asymmetrical head (left), a single barbed at the base of the head and a small barb on the opposite side along the tang. To make an arrow, the long tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood. This artifact was found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The point has been corroded by rusting. Scale in cm. Length: 15.2 cm. Weight: 13.7 g. Site Ngre Kataa. 2 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 0W, Level 3
- Date:
- 2009-06-02
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Iron tool
- Subjects Facet:
- Projectile points; Iron; Archaeology; Artifacts (Antiquities)
- Identifier:
- SF 09-069
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-02
- Genre Facet:
- Digital image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Partial iron projectile point, the tip of the head (left) broken off. The base of the head forms a right angle barb with the short tang. The tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood to form an arrow. This point was found in an area (mound 7) that archaeologists interpret as a house mound. The artifact is corroded by rust. Scale in cm. Length: 9.1 cm. Weight: 13.6 g. Site Ngre Kataa. 4 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 7, Unit 10N 30E, Level 8
- Date:
- 2009-06-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Iron tool
- Subjects Facet:
- Projectile points; Iron; Archaeology; Artifacts (Antiquities)
- Identifier:
- SF 09-114
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-04
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Coverage:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102 ;
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 4, 97-105 cm bd
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Jar
- Subjects Facet:
- Pottery; Archaeology; Artifacts (Antiquities)
- Identifier:
- NK 09-787
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Commentary:
- Composite photo made using Adobe Photoshop 2020
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A piece of a copper alloy (brass) bar, found in association with burned features that archaeologists interpret as linked to metalworking (left: side view; right, end views). The bar is square in cross-section (right). One end appears finished and has a slight circular depression or dimple (bottom right). The other end (top right) is jagged and appears to be broken from a longer bar. The artifact was recovered from soil associated with an amorphous burned feature, underneath which were a series of burned basins likely created by forging activities. The object is similar in appearance to brass bars known from the Ma'adin Ijafen cache of brass ingots documented by Theodore Monod in eastern Mauritania in the 1960s. As such, this may be the form in which metalworkers got the copper alloys that were worked at the site. Length: 1.7 cm. Weight: 2.8 g. Scale in cm. Site Ngre Kataa. 25 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 8W,Level 5. Piece plot: 198 cm W, 88 cm S, 110 cm bd
- Date:
- 2009-06-25
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Archaeology; Artifacts (Antiquities); Copper alloys; Metalworkinig
- Identifier:
- SF 09-293
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-25
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Commentary:
- Composite photo made using Adobe Photoshop 2020
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A flat, thin iron disk. The object is corroded by rust. Its function is unknown. The disc was found in close association with a large anvil or grinding stone and adjacent to a distinctive pottery vessel and a smaller, irregularly shaped piece of flat iron (SF 09-171). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 9.4 cm. Thickness: .2 cm. Weight: 49.3 g. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 134-140 cm S, 144-151 cm W, 100-107 cm bd
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Iron; Artifacts (Antiquities); Archaeology
- Identifier:
- SF 09-370
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
20. 17-19103
- Description:
- A flat, irregularly shaped iron with circular depression. The object is corroded by rust and its original form and function are unknown. It was found in close association with a large anvil or grinding stone (GS 09-15), a circular iron disk (SF 09-370) and a distinctive pottery vessel (NK 09-787). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 5.7 cm. Thickness: .2 cm. Weight: 9 g. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 130-134 cm S, 152-155 cm W, 109-112 cm bd
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Iron; Artifacts (Antiquities); Archaeology
- Identifier:
- SF 90-371
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111