Search

Start Over Subject(s) pottery Genre digital image Format image

1. Banda Heritage Community Event, 2011

Description:
Boase Chief Tolԑԑ Ligbi Wulotei (center) looks at pottery from Banda area archaeological sites while Banda Project team member Boye (far right) looks on. Banda Cultural Centre, Ahenkro, 15 July, 2011.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre; Community engagement; Community event
Subjects Facet:
Archaeology; Heritage; Pottery
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2011
Date searchable:
2011-07-15
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ahenkro;8.165961, -2.354312
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.165961, -2.354312

2. In situ grinding stones and pottery, unit 44N 4W, Mound 6, Ngre Kataa, 2008

Description:
Several grinding stones, a whole pot and a cluster of pottery sherds have been exposed in situ at the base of level 3, unit 44N 4W at Mound 6, Ngre Kataa. The large grinding stone in the foreground (grinding stone 1, NK-08-112) is oriented with its grinding surface facing down. Another smaller stone rests on a soil pedestal created as archaeologists excavated surrounding soil to a lower level. Upper right, a whole pottery jar (NK-08-176) sits next to a large grinding stone (grinding stone 3, NK-08-173) oriented with its grinding surface up. To the far left, above the photo scale in centimeters, archaeologists have exposed the edges of a pottery jar, broken in half and lying on its side. As excavations extended into the adjacent unit (42N 4W, to the left), this broken pot was found to be associated with two tuyere fragments. This cluster of grindstones, tuyeres and nearby burned features is interpreted as part of a larger metal-working workshop, the activities of which led to the build up of mound 6. The soil on the right side of the unit is darker because it is moister than that on the left. View to west. Site Ngre Kataa. 1 July, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17601; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, level 3
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Tuyere
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Identifier:
Catalog numbers NK-08-112, 08-176 and 08-173
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-07-01
Date searchable:
2008
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

3. Drawing a plan map, Mound 6, Ngre Kataa, 2008

Description:
Banda Research Project team members Amanda Logan (right) and Amy Groleau (left) draw a plan map of units 44N 4W and 44N 6W, Mound 6, Ngre Kataa. They map in situ artifacts and features, including several large grinding stones, a whole pot, pottery clusters and a tuyere fragment. Wooden stakes mark the corners of 2 x 2 meter excavation units. A photo scale place near a partially exposed everted rim jar in unit 44N 6W (NK-08-407) is in 5 centimeter increments. Ngre Kataa, 7 July, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6
Date:
2008-07-07
Location(s) Facet:
Ngre Kataa
Subjects:
Mapping; Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-07-07
Date searchable:
2008
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

4. In situ pottery and grinding stones, unit 42N 4W, Ngre Kataa, 2008

Description:
Excavations in unit 42N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at Mound 6, Ngre Kataa. Foreground, left, a grinding stone (GS 08-10) rests with its working surface face down. It sits at a slightly higher level than a nearby (left) whole pottery jar (NK 08-406). To the right of these, a partial pot (NK 08-282) and a tuyere fragment (NK 08-284) are clustered together with two halves of a broken pottery jar, lying with its exterior surface facing down. To the south (behind), near the sign board and framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Another partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12) have been exposed to the left of the sign board at 77 cm below the unit's datum. The narrow dark bands visible in the soil are the traces of animal burrows. Photo scale adjacent to the sign board in centimeters. View looking south. Site Ngre Kataa. 7 July 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19136; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19177; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:
Ngre Kataa, Mound 6, unit 42N 4W
Date:
2008-07-07
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Burned basin; Tuyere
Subjects Facet:
Archaeology; Excavations (Archaeology); Handicrafts; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-07-07
Date searchable:
2008
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

5. Burned feature, unit 50N 4W, Mound 6, Ngre Kataa, 2009

Description:
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17594
Provenance:
Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Burned basin
Subjects Facet:
Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009-06-29
Date searchable:
2009
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

6. Burned feature in a metallurgical workshop, Mound 6, Ngre Kataa, 2009

Description:
The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17593
Provenance:
Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Burned basin
Subjects Facet:
Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009-06-29
Date searchable:
2009
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

7. Perforated pottery jar, Mound 6, Ngre Kataa, 2009

Description:
A perforated pottery jar lidded with the pedestaled base of another pot sits in situ at the base of level 6, unit 46N 2W at Mound 6. The pot contained eight cowries and is interpreted by archaeologists as a shrine pot placed in association with metalworking facilities. Photo scale in 5 cm increments. Site Ngre Kataa. 24 June, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597
Provenance:
Ngre Kataa, Mound 6, 46N 2W, Level 6
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Shrines; Pottery; Metalworking; Cowries; Artifacts (Antiquities)
Identifier:
Catalog number NK-09-789
Creator:
Dr. Ann B. Stahl
Date searchable:
2009-06-24
Date searchable:
2009
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

8. North wall, unit 46N 2W, Mound 6, Ngre Kataa, 2009

Description:
The mouth of a perforated shrine pot (left) is covered with the pedestaled base of another pot. It remains in situ as the surrounding areas of unit 46N 2W are excavated to lower levels. Behind, the stratified layers of Mound 6 are visible in the unit's north wall. Center (back) are a series of anvil and grinding stones exposed at higher mound levels in other excavation units. During excavations in 2008, a cluster of four anvil/grinding stones was found at a level slightly higher than but adjacent (left/west) to the perforated pot. At right, in lower levels, two grinding stones rest at an angle in association with a burned feature. Archaeologists interpret Mound 6 as a metallurgical workshop at which stratified levels built up through repeated use of the same location. Photo scale in centimeters. Site Ngre Kataa. 2 July, 2009.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19131
Provenance:
Ngre Kataa, Mound 6, unit 46N 2W
Date:
2009-07-02
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Stratigraphy
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009-07-02
Date searchable:
2009
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

9. Pottery sherd with slag temper, Ngre Kataa, 2008

Description:
Side view of a broken pottery sherd with a large slag inclusion. The use of crushed slag as a tempering material included in potting clay is first seen in pottery associated with Ngre phase sites in the Banda area. The use of crushed slag as a temper intensifies during Kuulo phase times, after which it becomes uncommon. Ngre Kataa, June, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 9
Date:
2008-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Slag
Subjects Facet:
Archaeology; Pottery; Pottery making; Artifacts (Antiquities)
Identifier:
NK08-046
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-06-24
Date searchable:
2008
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

10. Insitu shrine clusters, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters B and C of what archaeologists interpret as a shrine (clusters A-D) which capped stratified deposits in a metallurgical workshop. Far left in unit 48N 10W, the flat surface of an anvil/grinding stone (GS 09-32) is exposed, to the left (west) of which a poorly preserved portion of an elephant tusk was found (now removed). To the right (east) of the large stone is Cluster B, which includes the group of sherds seen in the vertical exposure in front and left (west) of the tree stump. Behind the tree stump is a large cluster (C) of pottery lids, partial pots and iron objects. Photo scale marked in 5 cm increments. View looking towards northwest. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19192; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19154; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19197; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 3-4
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

11. Insitu shrine clusters, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters B-D of what archaeologists interpret as a shrine (clusters A-D) which capped stratified deposits in a metallurgical workshop. Bottom left, at the base of a balk supporting the unit peg, is cluster D, comprised of two stones flanking an iron disc, laid flat (SF 09-158), and a tri-looped iron bangle (SF 09-159). In front and left (east) of the tree stump is a large cluster (C) of pottery lids, partial pots and iron objects, including an iron bangle (SF 09-148) and a pair of miniature iron manacles (SF 09-171, "B"-shaped object). To the right (west) of the tree stump, another cluster of pottery and iron objects can be seen. Top right of the photo, a yellow notebook rests on top of an anvil/grinding stone (GS 09-32), next to which rested a poorly preserved section of an elephant ivory tusk. North arrow photo scale marked in 5 cm increments, arrow pointing north. View looking towards southwest. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19196; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19194; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 3-4
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron; Shackles
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

12. Burned features and insitu stones, Ngre Kataa, 2009

Description:
View across open excavations in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The photo centers on units 46N 8W (foreground) and the southern half of 48N 8W, the north wall of which (at 47N) can be seen behind the sign board. The exposed areas were excavated in 2008 and the photo taken in preparation for 2009 excavations. Traces of circular burned features, red-orange and yellow in color, can be seen in the freshly scraped surface of these units. The uppermost north arrow sits to the right (east) of the circular outline of a still-buried everted-rim jar. Another everted-jar rim can be seen exposed in the north wall at 47N. This rim and associated artifacts formed cluster B, part of a larger shrine feature (clusters A-D) that extended across the northern half of unit 48N 8W (beneath and behind the small tree trunk visible above and left of the sign board). Cluster A (unit 46N 8W) comprised a large pottery bowl surrounded by six iron bangles that was removed in 2008. It was positioned above and slightly west (left) of the burned feature (center photo) that is intersected by a tree root. Cluster B included the artifacts seen here in the north wall at 47N, together with an associated cluster of a pedestal-handled pot lid, dog skull and jaw bones revealed by further excavation beneath and west (left) of the tree stump. In the upper right of the photo (north and east), insitu anvil (GS 09-15, left) and grinding (GS 09-12, right) stones are visible in unit 50N 6W. Photo scales marked in 5 cm increments and measuring tape marks 2 m. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19152
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 100 cm bd
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa; 8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

13. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:
Insitu anvil/grinding stones in excavation unit 50N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. A large anvil stone (GS 09-15, foreground, left) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. A large tree root is visible to the west of the stone, behind which is an area of unexcavated soil on top of which pottery sherds had been found (now removed). To the east and flanked by the black-and-white photo scale is the partial rim of an everted-rim jar (NK 09-749). To the north of this, a large flat grinding stone (GS 09-12) has been pedestaled in place. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

14. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:
Insitu anvil/grinding stones in excavation unit 50N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Left of center photo, a large anvil stone (GS 09-15) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. Behind this stone is an area of unexcavated soil on top of which pottery sherds had been found (now removed). Lower foreground, flanked by the black-and-white photo scale, is the partial rim of an everted-rim jar (NK 09-749). To the north of this (right), a large flat grinding stone with a well-worn upper surface (GS 09-12) has been pedestaled in place. Visible in the southern corner of the west wall of the unit (upper left) in this photo is a flat iron disk (SF 09-159), embedded in the wall above a small stone. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

15. Insitu shrine clusters, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters C and D of what archaeologists interpret as a shrine that capped stratified deposits in a metallurgical workshop. Cluster D appears in the foreground, left, below unexcavated soil remaining around the 48N 8W unit peg. Here two small stones flank a flat iron disc (SF 09-159, left) and a tri-looped iron bangle (SF 09-158, right). Cluster C is a large grouping of pottery and iron objects located north of the tree stump, center photo. Included were several whole pottery lids, a broken but mostly complete jar associated with an iron bangle (SF 09-148) and a pair of miniature iron manacles (SF 09-171). The bangle is visible, resting on a soil pedestal in front of the tree trunk's center. In the photo's upper right, a large anvil stone (GS 09-32), on which sits a yellow notebook, is visible. Flanking this stone on its western edge was a portion of an ivory tusk. Photo scale marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19193; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

16. Insitu shrine cluster, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Center photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. At center photo, bottom, a pot lid with a strap handle (NK 09-382) rests on its side. To the right of the north arrow, portions of an another pedestal-handled pot lid lie with its interior oriented upward. Photo scale at upper right marked in cm. Arrow pointing north. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19194; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19192; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron; Shackles
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

17. Insitu shrine cluster, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Lower center of the photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. Photo scale marked in cm. View looking south. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19080; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19161; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19193
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron; Shackles
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

18. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:
Two views of insitu anvil/grinding stones in excavation unit 50N 6W, part of an area (mound 6) that archaeologists interpret as a metallurgical workshop. In the photo looking northward (arrows point north), a large anvil stone (GS 09-15, foreground, left) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. A large tree root is visible to the west of the stone, behind which is an area of unexcavated soil on top of which pottery sherds had been found (now removed). To the east and flanked by the black-and-white photo scale is the partial rim of an everted-rim jar (NK 09-749). To the north of this, a large flat grinding stone (GS 09-12) has been pedestaled in place. In the view looking west, the well-worn upper surface of this narrow stone can be seen. Visible in the southern corner of the west wall of the unit (upper left) in this photo is a flat iron disc (SF 09-159), embedded in the wall above a small stone. Further excavation showed that this disc was part of an object cluster that included a tri-looped iron bangle and interpreted as part of a shrine. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19118
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

19. Shrine clusters B-C, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters B and C of what archaeologists interpret as a shrine that capped stratified deposits in a metallurgical workshop. Cluster B encompassed the objects on the south (right) side of the photo, west of (below) the tree stump. To the right of the black-and-white photo stick (lower right) is an iron spike (SF 09-174), a half bangle (SF 09-173) and a slightly curved iron disc (SF 09-172) in a carefully placed composition. Immediately to the east (above in the photo), an aglomeration of pottery sherds is stacked. Later excavation revealed a pedestal-handled pottery lid, dog skull and jaw bones carefully placed below these sherds in cluster B. Cluster C encompassed the artifacts to the north (left) of the tree stump. These included a series of pottery lids, portions of single pottery jar and sherds from other pots. An iron bangle (SF 09-148) is visible above and slightly left of the top photo scale, sitting adjacent to a pottery lid (NK 09-381) lying with its interior surface up. This wider shrine assemblage overlaid burned features associated with metalworking activities. Black-and-white photo scale in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19164; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19193
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

20. Clay smoking pipe bowl, Kuulo Kataa, 2000

Description:
Broken bowl of a locally made clay smoking pipe, 2 views (left: bowl interior; right: bowl exterior). Pipes like this were made across West Africa after Europeans learned the practice of smoking tobacco from First Peoples of the Americas and introduced it to Africa in early centuries of the trans-Atlantic trade. This pipe bowl has a flared pedestal base decorated with red paint. The oval bowl is decorated with vertical rows of triangular impressions, above which are two grooved lines and an area with red paint. The bowl's interior is blackened from use toward its base. The bowl's rim and its stem are missing. The potting clay used to make the pipe is tempered with fine white grit. Photo scale in cm. Site Kuulo Kataa. 28 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 110N, Level 4
Date:
2000-06-28
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF KK 00-233
Creator:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2000-06-08
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.14847222, -2.37472222

21. Clay smoking pipe, Site A236, 2001

Description:
A short-stemmed, locally made clay smoking pipe, 4 views (bottom: pipe base; center left: view from side with bowl to right; center right: front of bowl; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe has a cylindrical bowl and lobed ("quatrefoil") base, the bottom of which shows signs of abrasion. On the base, vertical grooves mark the areas between lobes. Four horizontal gooves separate the base from a zone of vertical columns of diagonal impressions ("V"). Upper areas of the bowl are marked by another set of horizontal grooves. The bowl's rim is missing. Its stem joins the bowl at the base (a "single-angled" form). The cylindrical stem ends in a collar with a flat lip. The stem is decorated with two grooves line around its circumference. Photo scale in cm. Site A236. 23 March, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site A236, Mound 4, Surface
Date:
2001-03-23
Location(s) Facet:
Site A236
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF A236 01-220
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-03-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Site A236;8.268257, -2.300409
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.268257, -2.300409

22. Clay smoking pipe, Site A236, 2001

Description:
A short-stemmed, locally made clay smoking pipe, 3 views (bottom: pipe base; center: view from side with bowl to left; view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe has a cylindrical bowl and rounded base that shows extreme use-wear abrasion to that point that a hole has formed in the pipe's base. The bowl is decorated with two sets of horizontal incisions. Below the bottom set are several vertical incisions. Above the top set is faint overall dentate impression The bowl's rimis very abraded. The pipe's stem joins the bowl at the base (a "single-angled" form). The cylindrical stem ends in a rounded collar with a flat lip. Photo scale in cm. Site A236. 24 March, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site A236, Mound 12, Surface
Date:
2001-03-24
Location(s) Facet:
Site A236
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF A236 01-280
Creator:
Dr. Ann B. Stahl
Date searchable:
2001
Date searchable:
2001-03-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Site A236;8.268257, -2.300409
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.268257, -2.300409

23. Clay smoking pipe, Site A233, 2001

Description:
A short-stemmed, locally made clay smoking pipe, 2 views (bottom: view from side with pipe bowl to the left; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's cylindrical bowl has a flared pedestal base, the bottom of which shows signs of wear/abrasion. The bowl's rim has broken away. The stem joins the bowl at the base (a "single-angled" form). The cylindrical stem flares at the rim to a flattened lip. The pipe bowl is decorated with closely spaced rows of dentate impression. The flared base is decorated with several clusters of incised lines. Photo scale in cm. Site A233. 10 March, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Date:
2001-03-10
Location(s) Facet:
Banda
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF A233 01-183
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-03-10
Genre Facet:
Digital image
Format:
Image
Location(s):
A233;8.17376,-2.49841
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.17376,-2.49841

24. Clay smoking pipe, Kuulo Kataa, 1995

Description:
A short-stemmed, locally made clay smoking pipe, 3 views (bottom left: view from front; bottom right: side with pipe bowl to the left; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's bowl has a slightly flared base, the bottom of which shows signs of abrasion. Above its base, the pipe bowl is outward flaring. The bowl is decorated by overall diagonal incisions that meet to form a "V" pattern. The front is marked by a vertical row of circular impressions. Rounded appliques have been added to the bowl near to its base. The bowl's rim is missing. Its stem joins the bowl at its base (a "single-angled" form). The cylindrical stem is slightly collared at its end and has a rounded lip. The pipe has been minimally cleaned on the exterior and soil remains in the bowl interior. Photo scale in cm. Site Kuulo Kataa. 6 July, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 138, Unit 130W 24S, Level 2
Date:
1995-07-06
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF KK 95-194
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-07-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.14847222, -2.37472222

25. Clay smoking pipe bowl, Kuulo Kataa, 2000

Description:
Broken bowl of a locally made clay smoking pipe, 2 views (left: bowl interior; right: bowl exterior). Pipes like this were made across West Africa after Europeans learned the practice of smoking tobacco from First Peoples of the Americas and introduced it to Africa in early centuries of the trans-Atlantic trade. This pipe bowl flares outward toward its rim and inward toward its base. Its inward-flaring bottom is decorated with red paint in a zone marked by a deep horizontal groove. Above this, decorated zones are separated by two vertical grooves. Zones of hatched incised lines alternate with vertical rows of rectangular impressions. The top half of the bowl's interior is blackened from use. The bowl's base and the pipe's stem are missing. The potting clay used to make the pipe is tempered with fine white grit. Photo scale in cm. Site Kuulo Kataa. 6 July, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 123, Unit 89E 86S, Level 8
Date:
2000-07-06
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF KK 00-379a
Creator:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2000-07-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.14847222, -2.37472222

26. Clay smoking pipe, Kuulo Kataa, 2000

Description:
A short-stemmed, locally made clay smoking pipe, 2 views (bottom: view from side with pipe bowl to the left; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's bowl has a flared pedestal base with traces of red paint. The rounded pipe bowl is marked by deep vertical grooves at its base, above which are closely spaced horizontal rows of dentate impressions. The bowl's rim is missing. Its stem joins the bowl at its base (a "single-angled" form). The stem is collared at its end and has a flat lip. The potting clay used to make the pipe is tempered with fine white grit. Photo scale in cm. Site Kuulo Kataa. 4 July, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, 95E 108N, Level 3
Date:
2000-07-04
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF KK 00-326
Creator:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2000-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.14847222, -2.37472222

27. Clay smoking pipe, Ngre Kataa, 2009

Description:
A short-stemmed, locally made clay smoking pipe, 2 views (bottom: view from side with pipe bowl to the left; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's bowl has a flared pedestal base, the bottom of which shows signs of abrasion. Above its base, the pipe bowl is decorated with a zone of criss-cross incisions demarcated by two horizonal incisions (one above and one below). The bowl's rim is missing. Its stem joins the bowl above its base (a "double-angled" form). The stem flares somewhat toward its lip which is flattened. Photo scale in cm. Site Ngre Kataa. 27 May, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 28E, Level 5
Date:
2009-05-27
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF NK 09-008
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-27
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

28. Clay smoking pipe, Makala Kataa, 1990

Description:
Stem and base of a clay smoking pipe, 2 views (bottom: view from side with pipe bowl to the right; top: view from top). Short-stemmed pipes like this were made across West Africa after Europeans learned the practice of smoking tobacco from First Peoples of the Americas and introduced it to Africa in early centuries of the trans-Atlantic trade. This pipe has a round flared base. Its bowl is missing. The stem joins the bowl at the base (a "single-angled" form). The cylindrical stem has a collared, lobed ("quatrefoil") lip with circular impressions and small incisions on each of four lobes. The pipes is decorated overall with a red slip. Photo scale in cm. Site Makala Kataa. 27 June, 1990.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Makala Kataa, Station 6, Mound 4, Unit 14W 35S, Level 11
Date:
1990-06-27
Location(s) Facet:
Makala Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF MK6 90-029
Creator:
Dr. Ann B. Stahl
Date searchable:
1990
Date searchable:
1990-06-27
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Makala Kataa;8.142724; -2.382957
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.142724; -2.382957

29. Clay smoking pipe, Kuulo Kataa, 1995

Description:
A short-stemmed, locally made clay smoking pipe, 3 views (bottom left: bowl base and step viewed from top; bottom right: bowl base and stem from side, with pipe bowl to the left; top: bowl front). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's bowl has a slightly pedestaled base, the bottom of which shows signs of abrasion. Above its base, the pipe bowl is outward flaring and constricts slightly at the lip. The upper area of the bowl is decorated by overall vertical incisions interspersed with single vertical rows of circular impressions. A horizontal groove marks the boundary between a lower zone decorated with angled incisions. The pipe's stem joins the bowl above the bowl base (a "double-angled" form) and its lip is rounded. The pipe has been decorated with an overall red slip. It has been minimally cleaned on the exterior and soil remains in the bowl interior, with the end of a root visible in the bowl's base. Photo scale in cm. Site Kuulo Kataa. 29 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 106N, Level 4
Date:
1995-06-29
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Tobacco pipes; Pottery; Artifacts (Antiquities)
Identifier:
SF KK 00-268
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-06-29
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.14847222, -2.37472222

30. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

31. Burned features, unit 46N 2W, Ngre Kataa, 2009

Description:
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

32. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Coverage:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

33. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

34. Insitu grinding stone and jar, mound 6, Ngre Kataa, 2008

Description:
View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19128
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, Level 3
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

35. Pottery jar, mound 6, Ngre Kataa, 2008

Description:
Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19127
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W. Piece plot: 145-160 cm W, 12-30 cm S, 46-63 cm bd
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Fiber roulette
Subjects Facet:
Archaeology; Artifacts (Antiquities); Pottery
Identifier:
NK 08-176
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

36. Everted-rim pottery jar, Ngre Kataa, 2008

Description:
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:
2008-07-15
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Punctate; Cord roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
NK 08-406
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-15
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

37. In situ pottery and grinding stones, Ngre Kataa, 2008

Description:
Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:
Ngre Kataa, Mound 6, 42-46N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Anvil stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

38. In situ pottery, anvil and grinding stones, Ngre Kataa, 2008

Description:
Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19138
Provenance:
Ngre Kataa, Mound 6, 44N 6W, 70 cm bd
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone; Jar
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

39. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19144; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19147; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:
Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:
2008-07-09
Location(s) Facet:
Ngre Kataa;8.11277778, -2.30611111
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;
Coverage-Temporal:
Ngre Kataa
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

40. Everted-rim pottery jar, Ngre Kataa, 2008

Description:
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:
2008-07-15
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Punctate; Cord roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
NK 08-406
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-15
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

41. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. At the base of the photo, center, is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north; above the photo scale) is a small coiled iron bangle made from a flattened piece of iron (SF NK 08-182). A smaller bangle-like artifact lies directly above the pot, center photo (north; SF 08-139). This area (cluster A) was part of a larger cluster (clusters A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View from above, north at top of photo. Photo scale in cm increments. Site Ngre Kataa. 9 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19146; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:
Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:
2008-07-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

42. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the trunk of a small tree is visible, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. Center photo, flanked by photo scales, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19178
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:
2008-07-17
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-17
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Depicted:
Abass Idrisu
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

43. Insitu anvil/grinding stones and burned feature, Ngre Kataa, 2009

Description:
Looking eastward over excavation unit 48N 10W toward unit 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop, a series of anvil/grinding stones have been left in place and a burned feature exposed. Foreground, right, a large anvil stone (GS 09-33) rests atop another stone (GS 09-34). To the right (south), the circular rim of an everted-rim jar has been left in place. To the left (north) is a zone of darker ashy soil flecked with charcoal. Center photo is an anvil stone (GS 09-32), against which a partial elephant tusk--now removed--was found resting. Behind this stone is a tree root and base of a tree stump. The area from this stone (GS 09-32) and extending beyond the stump had been covered with artifacts (clusters B-D, now removed) that archaeologists interpret as a large shrine feature. Some of these artifacts were superimposed directly over the amorphous orange-red burned feature (center photo), which was likely created by high heat associated with forging metals. Other smaller stones have been left in place across the unit. Photo scales marked in 5 cm increments, arrows pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19171
Provenance:
Ngre Kataa, Mound 6, Units 48N 10W, 48 N 8W, Level 4
Date:
2009-07-04
Location(s) Facet:
8.11277778, -2.30611111
Subjects:
Anvil stone; Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

44. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units (where the trunk of a small tree is visible, above left of the sign board). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. The everted rim of a pottery jar visible in the north wall of the excavation unit (top left) was part of an adjacent cluster (B) that also included iron bangles (SF 08-183 & 184). Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19180; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19140; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19178; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19149; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19169
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:
2008-07-17
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-17
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

45. Insitu pottery and grinding stones, Ngre Kataa, 2008

Description:
View looking northward of early stage excavations at mound 6, Ngre Kataa, an area that archaeologists interpret as a metallurgical workshop. Center view is of units 42-48N 4W. In foreground, excavations in units 42N 4W and 44N 4W ave exposed clusters of pottery, a grinding stones, tuyeres and an area of burned soil associated with metal working. Foreground, bottom right, are a partial pottery jar (NK 08-520) and to its right (east) a small flat grinding stone (GS 08-12; ). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. A whole pottery vessel sit at a slightly lower level (NK 08-406) a short distance away (south east). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Excavations in the adjacent unit (46N 2W) in 2009 revealed a perforated shrine pot resting at a slightly lower level next to these stones. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 5 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19136; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:
Ngre Kataa, Mound 6, 42-48N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

46. In situ pottery and tuyere, Ngre Kataa, 2008

Description:
Excavations on the south edge of unit 44N 4W have exposed a cluster of insitu pottery and a tuyere fragment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Foreground, broken pieces of a pottery jar lie with their exterior surfaces facing down. Behind them and left rests a tuyere fragment (NK 08-284), its circular cross-section visible in front of the sign board. To the right (west) of this cluster is an area of dark reddened soil, one of many examples of burned soil in this area where metals were worked. This diffuse area of reddened soil extended underneath the sherd cluster, center photo. To the right, embedded in the balk behind the north arrow (to its south), the tip of a partial iron point (SF 08-159) is visible (right of the circular patch of dark soil). Photo scale in front marked in cm. Arrow pointing north. Site Ngre Kataa. 10 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, 44 N 4W, Level 3
Date:
2008-07-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Tuyere
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

47. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An arc of orange-red burned features is being revealed by excavations in units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the everted jar rim is visible in the north wall, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 16 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170
Date:
2008-07-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

48. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (center), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). These objects are surrounded by broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. View looking south. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19160; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19163; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19165; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19166
Provenance:
Ngre Kataa, Mound 6, 48N8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Bangles; Ornaments; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

49. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (upper right), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). To the right of this, surrounded by moistened soil, the edge of a large grinding stone (GS 09-32) is visible. Surrounding these objects are broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. Arrow pointing north, view from above. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19164; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19159
Provenance:
Ngre Kataa, Mound 6, 48N8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Bangles; Ornaments; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

50. Burned features in a metalworking area, Ngre Kataa, 2008

Description:
An area of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Left, back (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units. The everted jar rim visible in the north wall of the excavation (upper right) was part of this wider set (cluster B). The base of these clusters was about 20-30 cm above the burned basins exposed in this photo, which were likely associated with metal forging. Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the north of the burned features (right, foreground), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 70 cm bd
Date:
2008-07-17
Location(s) Facet:
8.11277778, -2.30611111
Subjects Facet:
Archaeology; Excavations (Archaeology); Pottery; Metalworking; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-17
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

51. Junior High School students learn about pottery making, 2019

Description:
Gathered around a table in the Banda Cultural Centre's exhibit hall during a workshop to gauge student interest in learning from heritage resources, University of Ghana Education PhD student Esther Attiogbe talks with a group of Junior High School girls about how women in the area made pottery from locally available clays. The photos of local pottery-making laid out on the table are ones included in the Banda Through Time repository. On shelves behind them are examples of pottery excavated from archaeological sites around the area. Banda Cultural Centre, Ahenkro, 25 June, 2019.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre
Subjects Facet:
Pottery; Archaeology; Pottery making; Education; Heritage
Creator:
Dr. Ann B. Stahl
Date searchable:
2019
Date searchable:
2019-06-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ahenkro;8.165961, -2.354312
Geographic Coordinates:
8.165961, -2.354312

52. Junior High School teachers participate in a heritage learning workshop

Description:
Gathered around a table in the Banda Cultural Centre's exhibit hall during a workshop to gauge interest in using local heritage resources to support classroom learning, several Banda area Junior High School teachers look at images included in the Banda Through Time digital repository. On shelves behind them are examples of pottery excavated from archaeological sites around the area. Banda Cultural Centre, Ahenkro, 26 June, 2019.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre
Subjects Facet:
Education; Heritage; Pottery; Archaeology
Creator:
Dr. Ann B. Stahl
Date searchable:
2019
Date searchable:
2019-06-26
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ahenkro;8.165961, -2.354312
Geographic Coordinates:
8.165961, -2.354312

53. Dorbour potters at a heritage celebration, 2019

Description:
Nafana potters from Dorbour sit behind a display of their wares during a heritage celebration organized by the Banda Heritage Initiative. Arrayed in front of them are pottery jars of varying size and a single small bowl. Ahenkro, 28 June, 2019.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19205
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre
Subjects Facet:
Heritage; Community event; Nafana (African people); Pottery; Pottery making
Creator:
Kelvin Asare
Date searchable:
2019
Date searchable:
2019-06-28
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ahenkro;8.165961, -2.354312
Sketchfab Uid:
Geographic Coordinates:
8.165961, -2.354312

54. Guests seated at a heritage celebration, 2019

Description:
Banda area chiefs and elders sit under a tree and community members under canopies at the start of a heritage celebration organized by the Banda Heritage Initiative. To the right, potters from Dorbour display their wares in front of where they sit. Ahenkro, 28 June, 2019.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre
Subjects Facet:
Heritage; Community event; Pottery
Creator:
Kelvin Asare
Date searchable:
2019
Date searchable:
2019-06-28
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ahenkro;8.165961, -2.354312
Geographic Coordinates:
8.165961, -2.354312

55. Drumming for masquerade dancers, 2019

Description:
An elder Ligbi woman and a young man play drums with their hands during a masquerade dance performed at a heritage celebration organized by the Banda Heritage Initiative. Seated in the background to the right are Nafana potters from Dorbour with an array of their wares. Ahenkro, 28 June, 2019.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19216
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre; Bedu; Do
Subjects Facet:
Heritage; Community event; Masquerades; Dance; Ligbi (language); Drums (musical instrument); Pottery
Creator:
Kelvin Asare
Date searchable:
2019
Date searchable:
2019-06-28
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ahenkro;8.165961, -2.354312
Sketchfab Uid:
Geographic Coordinates:
8.165961, -2.354312

56. Dorbour potters at a heritage celebration, 2019

Description:
Nafana potters from Dorbour demonstrate their potting practices during a heritage celebration organized by the Banda Heritage Initiative. Two women (Mary Yakosua, left) are in the process of forming the upper bodies of jars using clay that they brought from Dorbour. Ahenkro, 28 June, 2019.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19205
Location(s) Facet:
Ahenkro
Subjects:
Banda Cultural Centre
Subjects Facet:
Heritage; Community event; Nafana (African people); Pottery; Pottery making
Creator:
Kelvin Asare
Date searchable:
2019
Date searchable:
2019-06-28
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ahenkro;8.165961, -2.354312
Sketchfab Uid:
Geographic Coordinates:
8.165961, -2.354312