An educational poster with pictures and text which describes Banda-area village life from the 15th through the 17th centuries. It briefly summarizes what has been learned from archaeological excavations at Kuulo Kataa about metal working. It also outlines the use of wild and domestic animals and the new objects and practices that developed in this time when trade connections with the Niger River area were strong. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are housed in the Banda Cultural Centre, Ahenkro.
An educational poster with pictures and text which describes Banda-area village life during the 13th to the 15th centuries. It briefly summarizes what has been learned from archaeological excavations about handicrafts at Ngre Kataa including metal working and pottery making. It is one of five posters prepared for a Banda community event held in July, 2011. Printed versions of the posters are available in the Banda Cultural Centre, Ahenkro.
In June 2011, Banda Research Project team member Amanda Logan collaborated with local artist Kwame K.B. 2 to develop paintings for the doors of the Banda Cultural Centre's courtyard. The paintings illustrate crafts practiced in the area for which we have archaeological evidence. This image shows a blacksmith forging iron. Based on the presence of byproducts like slag and the tools used to make metal, we know that blacksmiths smelted and forged iron in the Banda area from at least 1000 years ago. Banda Cultural Centre, Ahenkro, June, 2016.
Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
A crucible used to process copper alloys from Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12. Crucibles like this would have been used to heat copper alloys to a liquid state for use in casting, including casting through a lost-wax process. Scale in cm. Kuulo Kataa, 27 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Handicraft; Metal casting; Metalworking; Copper alloys; Lost wax casting; Archaeology; Lost-wax process; Crucibles; Artifacts (Antiquities)
A burned basin-like feature is visible in profile in the east wall of excavation unit 130W 26S, Mound 138, Kuulo Kataa. Clustered and adjacent to the burned area at the base of level 7 are three pottery pedestal bases, broken away from their original pots. The presence of slag and other burned features in adjacent units suggest that Mound 138 was a place where the site's occupants worked metals. A photo scale with 5 cm intervals points north. Kuulo Kataa, 14 July, 1995.
Several grinding stones, a whole pot and a cluster of pottery sherds have been exposed in situ at the base of level 3, unit 44N 4W at Mound 6, Ngre Kataa. The large grinding stone in the foreground (grinding stone 1, NK-08-112) is oriented with its grinding surface facing down. Another smaller stone rests on a soil pedestal created as archaeologists excavated surrounding soil to a lower level. Upper right, a whole pottery jar (NK-08-176) sits next to a large grinding stone (grinding stone 3, NK-08-173) oriented with its grinding surface up. To the far left, above the photo scale in centimeters, archaeologists have exposed the edges of a pottery jar, broken in half and lying on its side. As excavations extended into the adjacent unit (42N 4W, to the left), this broken pot was found to be associated with two tuyere fragments. This cluster of grindstones, tuyeres and nearby burned features is interpreted as part of a larger metal-working workshop, the activities of which led to the build up of mound 6. The soil on the right side of the unit is darker because it is moister than that on the left. View to west. Site Ngre Kataa. 1 July, 2008.
Banda Research Project team members Amanda Logan (right) and Amy Groleau (left) draw a plan map of units 44N 4W and 44N 6W, Mound 6, Ngre Kataa. They map in situ artifacts and features, including several large grinding stones, a whole pot, pottery clusters and a tuyere fragment. Wooden stakes mark the corners of 2 x 2 meter excavation units. A photo scale place near a partially exposed everted rim jar in unit 44N 6W (NK-08-407) is in 5 centimeter increments. Ngre Kataa, 7 July, 2008.
In-progress excavations of adjacent 2 x 2 m units at Mound 148, Kuulo Kataa. The base of units 70E 48-52N and 72E 50N have been excavated to depths ranging from 90-110 cm below datum. The large area of dark soil concentrated in unit 70E 50N (center) is intrusive pit fill which cut through the living surface at this mound level. An area of packed reddish-orange laterite gravel in unit 70E 52N (bottom, left) likely represents a prepared floor surface. To the right of the dark pit soil, in the boundary between units 70E 50N and 70E 48N, is a an irregularly shaped burned feature interpreted by archaeologists as likely associated with metalworking. Two radiocarbon samples associated with this burned feature had calibrated age ranges between c.1200-1400 CE. A cluster of hearth stones has been exposed in nearby unit 72E 50N (center photo). White bags filled with soil samples collected for flotation sit outside the excavated area together with excavation equipment. View looking eastwards. Kuulo Kataa, 11 July, 2000.
Excavations in unit 42N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at Mound 6, Ngre Kataa. Foreground, left, a grinding stone (GS 08-10) rests with its working surface face down. It sits at a slightly higher level than a nearby (left) whole pottery jar (NK 08-406). To the right of these, a partial pot (NK 08-282) and a tuyere fragment (NK 08-284) are clustered together with two halves of a broken pottery jar, lying with its exterior surface facing down. To the south (behind), near the sign board and framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Another partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12) have been exposed to the left of the sign board at 77 cm below the unit's datum. The narrow dark bands visible in the soil are the traces of animal burrows. Photo scale adjacent to the sign board in centimeters. View looking south. Site Ngre Kataa. 7 July 2008.