Search

Start Over Subject(s) artifacts (antiquities) Subject(s) archaeology Format image

1. Twinned copper alloy figurine, Kuulo Kataa, 1995

Description:
Two views of a twinned lost-wax cast copper alloy figurine from Kuulo Kataa, Mound 118, Unit 62W 4N, Level 3. Lower "foot" plate broken off from figurine body. Height: 3.7 cm. Weight: 13.2 g. Kuulo Kataa, 15 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17308 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17314 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17320
Provenance:
Kuulo Kataa, Mound 118, Unit 62W 4N, Level 3
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Copper alloys; Archaeology; Figurines; Lost wax casting; Lost-wax process; Artifacts (Antiquities)
Identifier:
SF KK 95-137
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2012-07-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

2. Iron serpentine sculpture, Kuulo Kataa, 1995

Description:
Two views of a serpent-like figure made from an iron rod. The "head" of the direct metal sculpture resembles a triangular-tipped iron projectile point, similar to those found on the same site during the same time period. The body is formed by undulating S-shaped loops which are stacked atop one another to form the "tail." Kuulo Kataa, Mound 118, Unit 62W 4N, Level 1. Scale in cm. Length: 8.4 cm. 39.6 g. Kuulo Kataa, 15 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 118, Unit 62W 4N, Level 1
Location(s) Facet:
Kuulo Kataa
Subjects:
Serpents
Subjects Facet:
Direct metal sculpture; Archaeology; Snakes; Iron; Projectile point; Artifacts (Antiquities)
Identifier:
SF KK 95-103
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
2012-07-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

3. Front and side views of a twinned copper alloy figurine, Kuulo Kataa, 2000

Description:
Front and side views of a twinned, lost-wax-cast copper-alloy figurine from Kuulo Kataa, Mound 130, Unit 95E 108N, Level 2. Height: 3.9 cm. Weight: 3.8 g. Kuulo Kataa, 4 July, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17314 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17320 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17323
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 108N, Level 2
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Copper alloys; Archaeology; Figurines; Lost wax casting; Lost-wax process; Artifacts (Antiquities)
Identifier:
SF KK 00-318
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2012-08-02
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

4. Front and side views of a copper alloy figurine, Kuulo Kataa, 2000

Description:
Front and side views of a lost-wax cast copper alloy figurine from Kuulo Kataa, Mound 130, Unit 95E 108N, Level 3. Height: 3.5 cm. Weight: 2.4 g. Kuulo Kataa, 4 July, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17308 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17320 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17323
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 108N, Level 3
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Copper alloys; Archaeology; Figurines; Lost wax casting; Lost-wax process; Artifacts (Antiquities)
Identifier:
SF KK 00-319
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2012-07-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

5. Copper alloy finger ring, Kuulo Kataa, 1995

Description:
A copper alloy finger ring made from a rod forged into undulating S-shaped loops and joined at its ends by a flat metal plate. Two views. From Kuulo Kataa, Mound 101, Unit 2W 2S, Level 7. Height: 1.4 cm. Width: 2.6 cm. Weight: 8.4 g. Kuulo Kataa, 9 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 101, Unit 2W 2S, Level 7
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Copper alloys; Ornaments; Archaeology; Rings (finger jewelry); Artifacts (Antiquities)
Identifier:
SF KK 95-025
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
2012-07-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

6. Miniature copper alloy spoon, Ngre Kataa, 2009

Description:
Miniature lost wax cast spoon, perhaps a gold weight. From Ngre Kataa, Mound 7, Unit 14N 22E, Level 8. Length: 4.3 cm. Weight: 2.1 g. Ngre Kataa, 27 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 14N 22E, Level 8
Location(s) Facet:
Ngre Kataa
Subjects:
Miniature spoon
Subjects Facet:
Lost wax casting; Archaeology; Gold-weights; Copper alloys; Lost-wax process; Artifacts (Antiquities)
Identifier:
SF NK 09-313
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2012-07-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

7. Crucible, Kuulo Kataa, 2000

Description:
A crucible used to process copper alloys from Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12. Crucibles like this would have been used to heat copper alloys to a liquid state for use in casting, including casting through a lost-wax process. Scale in cm. Kuulo Kataa, 27 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 130, Unit 95E 102N, Level 12
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Handicraft; Metal casting; Metalworking; Copper alloys; Lost wax casting; Archaeology; Lost-wax process; Crucibles; Artifacts (Antiquities)
Identifier:
Catalog number SF-KK-00-229
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2010-08-20
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

8. Bell-shaped copper alloy pendant, Kuulo Kataa, 2000

Description:
Bell-shaped copper-alloy pendant from Kuulo Kataa, Mound 148, Unit 70E 48N, Level 2. Height: 3.3 cm. Weight: 5.4 g. Kuulo Kataa, 6 July, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 148, Unit 70E 48N, Level 2
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Archaeology; Pendants (jewelry); Ornaments; Copper alloys; Artifacts (Antiquities)
Identifier:
Catalog number SF-KK-00-362
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2012-07-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.14847222, -2.37472222

9. Copper wire finger ring, Ngre Kataa, 2009

Description:
Finger ring made from twisted copper alloy wire. From Ngre Kataa, Mound 6, Unit 44N 4W, Level 5. Width: 2.3 cm. Weight: 1.6 g. Ngre Kataa, 8 July, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17595
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, Level 5. Piece plot: 104 cm S, 153 cm W, 118 cm bd
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Wire; Ornaments; Rings (finger jewelry); Copper alloys; Artifacts (Antiquities)
Identifier:
SF NK 09-403
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2012-07-25
Genre:
Digital Image
Genre Facet:
Digital Image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

10. Grinding stone, Mound 138, Kuulo Kataa, 1995

Description:
A deeply worn grinding stone excavated from Level 5, Unit 130W 28S, Mound 138, Kuulo Kataa. Mound 138 is a low mound covering roughly 300 m2. Mound 138 deposits included slag and a burned feature (Unit 130W 30S) which was probably related to processing metals. These associations suggest that the grinding stone in unit 130W 28S may have been used in metalworking activities. Photo scale in 5 cm intervals. Kuulo Kataa, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 138, Unit 130W 30S, Level 5
Date:
1995-07-12
Location(s) Facet:
Kuulo Kataa
Subjects Facet:
Archaeology; Excavations (Archaeology); Artifacts (Antiquities); Grinding stone
Creator:
Dr. Ann B. Stahl
Date searchable:
1995-07-12
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2019-11-08
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.14847222, -2.37472222

11. Twinned copper alloy figurine, Ngre Kataa, 2008

Description:
A twinned lost wax cast copper alloy figurine from Ngre Kataa, Mound 6, Unit 44N 6W, Feature 5 cluster. Archaeologists interpret the Feature 5 cluster as a shrine placed among metalworking facilities. Height: 5.9 cm. Weight: 31.3 g. Ngre Kataa, 19 July, 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17320; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19086; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19084; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19085
Provenance:
Ngre Kataa, Mound 6, Unit 44N 6W, Feature 5 cluster
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Copper alloys; Archaeology; Figurines; Lost wax casting; Lost-wax process; Artifacts (Antiquities)
Identifier:
Catalog number SF-NK-08-209
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2012-07-25
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

12. Red-painted pottery bowl interior, Banda 27, 2001

Description:
Photo of a pottery bowl rim and body, with profile depicted (left). The bowl's interior surface is decorated with lines of red paint applied in reticulate and pendant patterns. The rim of the bowl is slightly everted. A portion of the interior surface is blackened as an effect of firing. An INAA sample ("Banda 27-11") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 34 cm at exterior lip. Sherd represents an estimated 20% of the bowl's circumference. Scale in cm. Site Banda 27. 28 February, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17614
Provenance:
Banda 27, Mound 2, Unit 1, Level 14
Date:
2001-02-28
Location(s) Facet:
Site Banda 27
Subjects:
Red paint; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-130B; NA Banda 27-11
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-02-28
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Banda 27;8.191119, -2.16954
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.191119, -2.16954

13. Red-painted pottery bowl exterior, Banda 27, 2001

Description:
Photo of a pottery bowl rim and body, exterior surface, with profile depicted (left). The rim of the bowl is slightly everted. The bowl's exterior is decorated with several bands of red paint, one applied below the angle of the rim, one mid-way down the bowl body, and one toward the base. Blackened areas of the exterior are a result of firing. An INAA sample ("Banda 27-11") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 34 cm at exterior lip. Sherd represents an estimated 20% of the bowl's circumference. Scale in cm. Banda 27. 28 February, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17613
Provenance:
Banda 27, Mound 2, Unit 1, Level 14
Date:
2001-02-28
Location(s) Facet:
Site Banda 27
Subjects:
Red paint; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-130B, INAA Banda 27-11
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-02-28
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Banda 27;8.191119, -2.16954
Date Digitized:
2016
Sketchfab Uid:
Geographic Coordinates:
8.191119, -2.16954

14. Carinated pottery bowl rim, Banda 27, 2001

Description:
Photo of a pottery bowl rim, exterior surface, with profile depicted (left). The bowl is decorated with several shallow horizontal grooves above its angular carination. A row of vertical impressions marks the carination, below which is a zone of angled "dentate" impressions, bounded by a shallow groove at its lower edge. Traces of red paint appear on the upper portions of the bowl. An INAA sample ("Banda 27-1") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 20 cm at the interior lip. Sherd represents an estimated 15% of the bowl's circumference. Scale in cm. Site Banda 27. 29 January, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Banda 27, Mound 1, Unit 1, Level 3
Date:
2001-01-29
Location(s) Facet:
Site Banda 27
Subjects:
Dentate impression; Red paint; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-29A, INAA Banda 27-1
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-01-29
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Banda 27;8.191119, -2.16954
Date Digitized:
2016
Sketchfab Uid:
Geographic Coordinates:
8.191119, -2.16954

15. Everted-rim pottery jar, site A-212, 2001

Description:
A partially reconstructed everted-rim pottery jar excavated from Banda area site A-212, Mound 7, level 10. The jar's exterior surface is decorated below the neck with closely spaced rows of dentate (comb) impressions, intersected by a double diagonal line of dentate impressions. Double lines of dentate impression applied in a chevron pattern form a band between the upper zone of dentate decoration and jar's plain base. The jar's interior is finished with an orange-red slip. An INAA sample ("A212-16") from this jar and was assigned to the "G1" group of ceramic fabrics and therefore likely made west of the Banda hills. Rim diameter 24 cm at exterior lip. Photo scale in cm. Site A-212. 1 February, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
A-212, Mound 7, Unit 1, Level 10
Date:
2001-02-19
Location(s) Facet:
Site A212
Subjects:
Jar; Dentate impression; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-78, INAA A212-16
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001-02-19
Date searchable:
2001
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
A-212;8.337343, -2.45727
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.337343, -2.45727

16. Carinate globular pottery jar, Kuulo Kataa, 1995

Description:
Photo of a reconstructed carinate globular pottery jar, with profile depicted (left). The jar was found in an upright position beneath a lens of hardened clay, its rim at 211 cm below datum and its base at 224 cm bd. The jar's mouth is small. Below its lip is a ridge marked with vertical impressions. The surface above the carinated shoulder is decorated with alternating horizontal lines of dentate (comb) impression and grooving. Below the carination, the base and lower portions of the jar are decorated with a carved roulette impression. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. An INAA sample (NA "KK 95-61") from this jar was assigned to the "K1" group of ceramic fabrics. The jar was therefore likely made east of the Banda hills. A jar of similar form, decoration, and interior wear (KK 95-693) was found one meter away and at a slightly lower level in the east profile wall of the excavation unit. Rim diameter: 8 cm. Photo scale in cm. Kuulo Kataa. 13 June, 1995.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17628
Provenance:
Kuulo Kataa, Mound 101, Unit 2W 2S, Level 18, 211-224 cm bd
Date:
1995-06-13
Location(s) Facet:
Kuulo Kataa
Subjects:
Jar; Dentate impression; Carved roulette; Grooving; Neutron Activation Analysis
Subjects Facet:
Pottery; Archaeology; Artifacts (Antiquities)
Identifier:
KK 95-350; NA KK 95-61
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-06-13
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2016
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.14847222, -2.37472222

17. Carinate globular pottery jar, exterior, Kuulo Kataa, 1995

Description:
Photo of a patially reconstructed carinate globular pottery jar, with profile depicted (left). The jar was partially exposed, sitting upright in the east profile wall of the unit. The jar broke insitu and half of the vessel was removed and reconstructed. The jar has a narrow mouth. Alternating horizontal bands of shallow grooving and dentate (comb) impression decorate the area below the lip. A horizontal grooved line and a line of dentate (comb) impression applied above the carinated shoulder meet at small circular punctate impressions. The base and lower portions of the jar are decorated with a carved roulette impression. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. A jar of similar form, decoration and interior wear was found one meter away and at a slightly higher level in the same unit (KK 95-350). Rim diameter: 10 cm. 50% of vessel reconstructed. Photo scale in cm. Kuulo Kataa. 10 July, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17629; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17625; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17552
Provenance:
Kuulo Kataa, Mound 101, Unit 2W 2S, East Profile, c. 219 cm below datum
Date:
1995-07-10
Location(s) Facet:
Kuulo Kataa
Subjects:
Jar; Dentate impression; Punctate; Carved roulette; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
KK 95-693
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-07-10
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.14847222, -2.37472222

18. Carinate globular pottery jar, interior, Kuulo Kataa, 1995

Description:
Photo (interior) of a reconstructed carinate globular pottery jar, with profile depicted (left). The jar was partially exposed, sitting upright in the east profile wall of the unit. The jar broke insitu and half of the vessel was removed and reconstructed. The jar has a narrow mouth. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. A jar of similar form, decoration and interior wear was found one meter away and at a slightly higher level in the same unit (KK 95-350). Rim diameter: 10 cm. 50% of vessel reconstructed. Photo scale in cm. Kuulo Kataa. 10 July, 1995.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17628; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17625; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17552
Provenance:
Kuulo Kataa, Mound 101, Unit 2W 2S, East Profile
Date:
1995-07-10
Location(s) Facet:
Kuulo Kataa
Subjects:
Jar
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
KK 95-693, Pot 2
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-07-10
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.14847222, -2.37472222

19. Recurved jar rim, Kuulo Kataa, 1995

Description:
Photo of an inward-curving (recurved) jar rim sherd, with profile depicted (left). A zone of diagonally oriented dentate (comb) impressions is bounded on upper and lower edges by a shallow horizontal groove. A mica paint/slip was applied over top of the dentate impressions. The ceramic fabric was tempered with angular quartz grit. An INAA sample ("KK NA-29") was unassigned to a specific group of ceramic fabrics, lending no insight into where the jar was made. Interior neck diameter: 18 cm. Sherd represents an 12% of the jar's circumference. Scale in cm. Kuulo Kataa. 25 June, 1995.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 101, Unit 2W 2S, Level 25
Date:
1995-06-25
Location(s) Facet:
Kuulo Kataa
Subjects:
Mica slip; Dentate impression; Jar; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-06-25
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.14847222, -2.37472222

20. Pottery sherd with slag temper, Ngre Kataa, 2008

Description:
Side view of a broken pottery sherd with a large slag inclusion. The use of crushed slag as a tempering material included in potting clay is first seen in pottery associated with Ngre phase sites in the Banda area. The use of crushed slag as a temper intensifies during Kuulo phase times, after which it becomes uncommon. Ngre Kataa, June, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 9
Date:
2008-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Slag
Subjects Facet:
Archaeology; Pottery; Pottery making; Artifacts (Antiquities)
Identifier:
NK08-046
Creator:
Dr. Ann B. Stahl
Date searchable:
2008-06-24
Date searchable:
2008
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

21. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, levels 3-6. The jar (Vessel 1) was found upside-down, resting on its rim and in association with a cluster of several other complete (Vessels 2 & 3) and broken pots in what has been interpreted as a kitchen area. The round-based jar is decorated on its lower surface by faint twisted cord-roulette impressions. The zone of cord rouletting is separated from the undecorated surface above by three arching grooves or channels. Multiple small circular punctates mark the place where grooved lines meet. Whole pot. Rim diameter c. 30 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19006; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19007
Provenance:
Ngre Kataa (Banda 40), Mound 1, Unit 1, Levels 3-6
Date:
2001-04-05
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Twisted cord roulette; Grooving; Punctate
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-336, Vessel 1
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-05
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

22. Large pottery bowl, Makala Kataa, 1989

Description:
Photo of a large pottery bowl. The rim is angled inward, creating a carination where the bowl's rim and body meet. Above the carination and around the rim's circumference, the exterior surface is decorated with shallow parallel grooves. The bowl's upper body is decorated with several clusters of triangular impressions which are bounded by angled pairs of grooved lines. The interior and exterior surfaces of the bowl are burnished, giving the bowl a slight sheen. A small pedestal stabilizes the bowl at its base. The bowl is consistent in shape and size with serving/eating bowls from which several individuals (typically men) would eat. The bowl was found positioned upside-down amid a concentration of other whole and partial pottery vessels, grinding stones, charred seeds and wide-spread fire-hardened soil. The context is interpreted as a kitchen area destroyed by an incident of intense fire. Whole pot. Scale in cm. Site Makala Kataa. 4 July, 1989.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Makala Kataa, Station 6, Mound 5, 4W 4S, Level 7-8
Date:
1989-07-04
Location(s) Facet:
Makala Kataa
Subjects:
Bowl
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
MK6 89-110, Pot 6
Creator:
Dr. Ann B. Stahl
Date searchable:
1989
Date searchable:
1989-07-04
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Makala Kataa;8.142724; -2.382957
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.142724; -2.382957

23. Small pedestal-base pottery bowl, Makala Kataa, 1989

Description:
Photo of a small pedestal-base pottery bowl. The rim of the bowl is broken away around the entire circumference of the bowl. The exterior surface is burnished and decorated with several triangular impressions (not visible on the surfaces in this photo). The bowl is consistent in shape and size with serving/eating bowls from which an individual (typically a woman) would eat. The bowl was found in association with several other pots and a laterite hearthstone in an area surrounded by oxidized fire-hardened sediment. The wider context of the excavation unit is interpreted as a kitchen area destroyed by an incident of intense fire. Scale in cm. Site Makala Kataa. 11 July, 1989.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Makala Kataa, Station 6, Mound 5, Unit 0W 4S, Level 5
Date:
1989-07-11
Location(s) Facet:
Makala Kataa
Subjects:
Bowl
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
MK6 89-177, Pot 13
Creator:
Dr. Ann B. Stahl
Date searchable:
1989
Date searchable:
1989-07-11
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Makala Kataa;8.142724; -2.382957
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.142724; -2.382957

24. Everted-rim pottery jar, Site B-143, 2001

Description:
Photo of a dark brown pottery jar rim, neck and body, with profile depicted (left). The rim of the jar is everted in profile. Below the neck, the body of the jar is decorated with a carved roulette rolled across the surface to create a herringbone design. The zone of carved roulette impression is bounded by a horizontal shallow groove. A curvilinear groove cuts across the roulette impression. The ceramic fabric contained both laterite and white grit, as well as finely crushed iron slag. INAA analysis ("NA B-143-8") assigned this jar to the "K1" group, with the implication that it was likely made on the east side of the Banda hills. Rim diameter: 22 cm at interior lip. Sherd represents an estimated 25% of the circumference of the jar. Scale in cm. Site B-143. 14 March, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site B143, Mound 1, Unit 1, Level 8
Date:
2001-03-14
Location(s) Facet:
Site B-143
Subjects:
Carved roulette; Jar; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-208A; NA B-143-8
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-03-14
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Site B-143;8.072173, -2.395998
Date Digitized:
2016
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.072173, -2.395998

25. Red-painted, mica-slipped pottery bowl rim, Site A-94, 2001

Description:
Photo of a red-painted and mica-slipped bowl rim, with profile depicted (left). Toward the lip, multiple horizontal bands of grooving and dentate (comb) impression are overlaid by red paint. Below this is a zone with horizontal lines of wavy line impression and grooving overlaid by a mica slip. The lower zone is red-painted. The ceramic fabric includes finely crushed white grit which includes some quartz. An INAA sample ("A94-8") was assigned to the "L" group, indicating that the bowl was made from clays mined west of the Banda hills. Rim diameter: 14 cm at the interior lip. Sherd represents an estimated 15% of the bowl's circumference. Scale in cm. Site A-94. 21 February, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site A-94, Mound 2, Unit 1, Level 6
Date:
2001-02-21
Location(s) Facet:
Site A-94
Subjects:
Wavy line impression; Dentate impression; Red paint; Mica slip; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-94B
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-02-21
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Site A-94;8.375975, -2.438689
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.375975, -2.438689

26. Carved roulette-decorated pottery bowl, Site A-212, 2001

Description:
Photo of the rim and shoulder of a large pottery bowl, with profile depicted (left). The bowl's exterior is decorated with a herringbone design, created by rolling a carved wooden roulette across its entire surface, except for a narrow band just below the bowl's lip. A single diagonal shallow groove was applied across the surface above the shoulder. An INAA sample (NA "A212-8") from this bowl was "unassigned" to a specific group of ceramic fabrics, lending no insight into where the bowl was made. Rim diameter: 20 cm at the interior lip. Sherd represents about 11% of the bowl's circumference. Scale in cm. Site A-212. 18 February, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site A-212, Mound 7, Unit 1, Level 3
Date:
2001-02-18
Location(s) Facet:
Site A-212
Subjects:
Carved roulette; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-71B, NA A212-8
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-02-18
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Site A-212;8.337343, -2.45727
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.337343, -2.45727

27. Everted-rim pottery jar, site A-9, 2001

Description:
Photo of an everted-rim jar. The round-based pot is decorated on its lower surface by maize cob impressions, created by rolling a kernel-less maize cob over the pot's surface. The top edge of the maize-cob-rouletted zone is marked by pendant grooves or channels. Small circular punctates mark the place where pendant grooved lines meet. A single grooved line offsets this decorated zone from an undecorated zone below the jar's neck. Whole pot. Scale in cm. Site A-9. 1 Feb. 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site A-9, Unit 1, Level 6
Date:
2001-02-01
Location(s) Facet:
Site A-9
Subjects:
Maize cob roulette; Jar
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-338, Vessel 2
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-02-01
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Site A-9;8.375975; -2.438689
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.375975; -2.438689

28. Carinated pottery bowl rim, Site B-123, 2000

Description:
Photo of a carinated pottery bowl, with profile depicted (left). The bowl has a restricted opening with the rim rounded at the lip. Above the angular carination, the exterior surface is decorated with horizontal bands of wavy line impression, below which are two deep channels. Shallow grooves appear above and below narrow bands of dentate (comb) impressions. Below the carination, the exterior surface is decorated overall with a carved roulette impression. An INAA sample ("B123-2") from this bowl was assigned to the "L" group of ceramic fabrics. It was therefore likely made from clays mined west of the Banda hills. Rim diameter: 23 cm at the interior lip. Sherd represents an estimated 18% of the bowl's circumference. Scale in cm. Site B-123. 22 July, 2000.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Date:
2000-07-22
Location(s) Facet:
Site B-123
Subjects:
Dentate impression; Wavy line impression; Carved routlette; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
B-123-00-10; NA B-123-2
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2000
Date searchable:
2000-07-22
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Site B-123;8.123323, -2.384331
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Ann B. Stahl
Geographic Coordinates:
8.123323, -2.384331

29. Red-painted body sherds from a jar, Banda 27, 2001

Description:
Body sherds from a large jar. The exterior surface is decorated with bands of horizontal grooving, inside of which are bands of dentate (comb) impressions. Rows of dentate impression applied at an angle create a chevron design across the central zone. An overall red paint or slip finishes the surface. An INAA sample from this jar ("Banda 27-13") was assigned to the "K2" group of ceramic fabrics. It was therefore liked made from clays mined east of the Banda hills. Scale in cm. Site Banda 27. 1 March, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Banda 27, Mound 2, Unit 1, Level 16
Date:
2001-03-01
Subjects:
Red paint; Dentate impression; Jar; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-132C; NA Banda 27-13
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-03-01
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Banda 27;8.191119, -2.16954
Date Digitized:
2016
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Geographic Coordinates:
8.191119, -2.16954

30. Carinated pottery bowl, rim and body, Site B-143, 2001

Description:
Photo of a buff-colored pottery bowl rim and carination, with profile depicted (left). The bowl is decorated with two shallow horizontal grooves, applied below the lip on the exterior surface. Below this is a band of shallow criss-cross incised lines, beneath which is a plain zone, followed by a more deeply incised band of criss-cross incisions, applied just above the exaggerated carination (angled shoulder). Based on patterned overlap in the criss-cross lines, the lines slanted upper left to lower right were made first, after which the lines slanted upper right to lower left were made. The exterior surface below the carination is undecorated. The ceramic fabric included some laterite grit as well as a small amount of finely crushed slag. An INAA sample from this bowl (NA "B143-2") was "unassigned" to a specific group, lending no insight into where the bowl was made. Rim diameter: 15 cm at interior lip. Sherd represents about 15% of the vessel's circumference. Scale in cm. Site B-143. 13 March, 2001.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Site B-143, Mound 1, Unit 1, Level 3
Date:
2001-03-13
Location(s) Facet:
Site B-143
Subjects:
Incised decoration; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-203; NA B-143-2
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-03-13
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Site B-143;8.072173, -2.395998
Date Digitized:
2016
People Facet:
Dr. Ann B. Stahl
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.072173, -2.395998

31. Tuyere used in iron smelting, surface survey, 1997

Description:
End view of a fired clay tuyere fragment used in an iron smelting furnace. A thick layer of slag produced during the smelting process coats the tuyere's outside surface (upper right). The tuyere was used to introduce air to the interior chamber of a smelting furnace. The tuyere was collected during site survey by N. Leith Smith in the course of his doctoral dissertation research. The tuyere was recovered in his survey area A, Site 7, Quad P14. Banda area, 8 February, 1997.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-18284
Date:
1997-02-08
Subjects:
Tuyere
Subjects Facet:
Archaeology; Metallurgy; Iron smelting; Artifacts (Antiquities)
Identifier:
SF97-054
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
1997
Date searchable:
1997-02-08
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Location(s):
8.173691,-2.381385
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.173691,-2.381385

32. Large slag nodule, Ngre Kataa, Mound 8, 2008

Description:
Iron slag is formed as a byproduct of iron smelting. Here a large slag nodule has broken in half, revealing its interior texture. At the archaeological site of Ngre Kataa, large chunks of 'bubbly' slag like this were occasionally found in household and other contexts, away from areas otherwise associated with metal-working activities. Potters at the time of the site's occupation had begun to use crushed iron slag as a tempering agent in their potting clays, which may explain why large nodules were being carried and cached in areas away from metal-working locations. Ngre Kataa, June, 2008.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 3
Date:
2008-06-23
Location(s) Facet:
Ngre Kataa
Subjects:
Slag
Subjects Facet:
Archaeology; Metalworking; Metallurgy; Pottery making; Artifacts (Antiquities)
Identifier:
NK08-027
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

33. Tuyere used in iron smelting, surface survey, 1997

Description:
Side view of a fired clay tuyere fragment used in an iron smelting furnace. A thick layer of slag produced during the smelting process coats the tuyere's outside surface. The tuyere was used to introduce air to the interior chamber of a smelting furnace. The tuyere was collected during site survey by N. Leith Smith in the course of his doctoral dissertation research. The tuyere was recovered in his survey area A, Site 7, Quad P14. A catalog tag indicating provenience information is tied to the tuyere with string. Banda area, 8 February, 1997.
Rights:
Creative Commons Attribution--NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-18285
Provenance:
Regional Testing Area A, Site 7, Quad P14
Date:
1997-02-08
Subjects:
Tuyere
Subjects Facet:
Archaeology; Metallurgy; Iron smelting; Artifacts (Antiquities)
Identifier:
SF97-054
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
1997
Date searchable:
1992-02-08
Genre:
35 mm slide
Genre Facet:
35 mm slide
Format:
Image
Location(s):
8.173691,-2.381385
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.173691,-2.381385

34. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Levels 5-6. The jar (Vessel 1) was located in the north profile wall of the unit, together with another vessel (Vessel 2). The jar has a carinated shoulder and a rounded base. To the right and below the carination, a portion of the exterior surface has broken away. The upper area of the jar is decorated with three horizontal grooved lines, inbetween which are lines of dentate impression. Just above the carination is another line of dentate impression and a grooved line. To the left and right, on the upper side of the carination, sets of two triangular designs were applied, consisting of three punctates connected by two short grooved lines. The area inside the triangle is marked by crossed dentate impressions, forming an "X" inside the triangle. This design was repeated twice on the recovered portion of the jar. It was likely repeated a third time on the missing portion. Below the carination are two shallow horizontal grooves. The jar's base is smooth, with no surface treatment applied. Roughly 65% of the vessel was recovered. Rim diameter 25 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19000
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 5-6, North Wall
Date:
2001-04-05
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Dentate impression; Punctate; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-317. Vessel 1
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-05
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

35. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 5. The jar (Vessel 2) was located in the north profile wall of the unit together with another vessel (Vessel 1). The jar has a carinated shoulder and a rounded base. The upper area of the jar is decorated with three horizontal grooved lines inbetween which are lines of dentate impression. The base of the jar is surface treated with a twisted cord roulette. Two roughly parallel horizontal grooved lines separate the cord rouletted zone from a plain zone below the carination. A hole in the base of the pot (ca. 7 cm across) may have been deliberately broken in this otherwise whole pot. Rim diameter 22 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-18999
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 5, N Wall
Date:
2001-04-05
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Cord roulette; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-335, Vessel 2
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-05
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

36. Iron tool, Ngre Kataa, 2009

Description:
An iron artifact (SF 09-031) recovered from screened soil taken from the southern end of excavation unit 50N 2W where two large boulders used as anvil/grinding stones were located. In the unit's northwest corner was a burned feature interpreted as the remains of a forge in an area where metalworking took place. The flat iron object is pointed on one end and has two rounded lobes at the other, perhaps to facilitate turning (like a key?). Its function is unknown. The object has been corroded by rusting. Scale in cm. Length: 5.7 cm. Weight: 9.3 g. Site Ngre Kataa. 30 May 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 3
Date:
2009-05-30
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Archaeology; Artifacts (Antiquities); Iron
Identifier:
SF 09-031
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-30
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

37. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
Excavation of a shrine cluster, two images. The image on left shows a pottery cluster, first exposed in June 2008, as it appeared on 10 June 2009. At bottom center of this image is a pedestal base, above which is a tight cluster of rim sherds. The curved sherd on the far right in this image is the outer edge of the pedestal-handled lid, which is fully exposed in the photo on the right, taken on 16 June 2009. A dog skull in a highly friable state is visible above and to the right of this lid in both photos. In the imgae on the right, an iron bangle (SF 09-219) can be seen resting in an angled position, below and left of which is a dog mandible. These were uncovered by excavation below and behind the pedestal base seen in the picture on the left. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 and 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19153; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19154
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 4-5, Cluster 11
Date:
2021-03-19
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Ornaments; Bangles; Dogs; Shrines; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

38. Insitu iron bangle, Ngre Kataa, 2009

Description:
An insitu iron bangle (SF 09-132) made from a flattened iron rod with overlapping ends. The bangle occurred as an isolated find in the upper levels of an area (mound 6) that archaeologists interpret as a metallurgical workshop. Photo scales marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19190
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 2. Piece plot: 12 cm S, 135 cm W, 80 cm bd
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Archaeology; Artifacts (Antiquities); Excavations (Archaeology)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Ditigal image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

39. Iron bangle, Ngre Kataa, 2009

Description:
An iron bangle (SF 09-132) made from a flattened iron rod with overlapping ends. One end of the bangle is bent inward. The bangle occurred as an isolated find in the upper levels of an area (mound 6) that archaeologists interpret as a metallurgical workshop. The bangle has been corroded by rusting. Scale in cm. Width: 7.9 cm. Weight: 25.6 g. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19189
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 2. Piece plot: 12 cm S, 135 cm W, 80 cm bd
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-132
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

40. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 20. The jar was located in the west profile wall of the unit. The jar has a carinated shoulder and a rounded base. A single horizontal line of wavy line impression was applied to the neck constriction, with the area above the carination otherwise plain. The base of the jar is surface treated with a fiber (perhaps braided strip) roulette. Two roughly parallel horizontal grooved lines are superimposed over the roulette treatment. Whole pot. Rim diameter 17.5 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 3 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 20, W Wall.
Date:
2001-04-03
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Wavy line impression; Fiber roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-332, Vessel 1
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-03
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

41. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also finely crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known source group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19004
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 15, South Wall
Date:
2001-04-05
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Carved roulette; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-318, Vessel 1A
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-05
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

42. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also fine crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 15, South Wall
Date:
2001-04-05
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Carved roulette; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-318, Vessel 1A
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-05
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

43. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, Levels 4-5. The jar (Vessel 3) was found sitting upright in association with a cluster of several other complete and broken pots (Vessels 1 & 2) in what has been interpreted as a kitchen area. Most of the jar has been surface treated with a twisted cord roulette. Single pendant grooved lines surround the circumference of the jar. A total of five circular impressions, perhaps made with a hollow reed, are placed below the intersection points of the pendant grooves. A hole in the base of the pot (ca. 7 cm across) may have been deliberately broken in this otherwise whole pot. Rim diameter: 17.5 cm at exterior lip. Site Ngre Kataa ("Banda 40"). 3 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-18299; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19007
Provenance:
Ngre Kataa (Banda 40), Mound 1, Unit 1, Levels 4-5
Date:
2001-04-03
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Cord roulette; Punctate; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-333, Vessel 3
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2002-03-04
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

44. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, Levels 4-6. The jar (Vessel 2) was found sitting upright in association with a cluster of several other complete (Vessels 1 & 3) and broken pots in what has been interpreted as a kitchen area. The upper surface of the round-based jar is undecorated. In a zone bounded by double grooved lines, the base and lower surface of the jar is surface treated with maize cob roulette. Groups of three circular punctates mark the spots where gooved lines meet. A hole in the base of the pot (4 x 3.5 cm) may have been deliberately broken in this otherwise whole pot. Rim diameter: 20.5 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 4 March, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-18299; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19006
Provenance:
Ngre Kataa (Banda 40), Mound 1, Unit 1, Levels 4-6
Date:
2001-04-03
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Maize cob roulette; Punctate; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-334, Vessel 2
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-03
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

45. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 16. The undecorated exterior surface of the round-based jar is orange-brown from firing, with areas of black fire-clouding. Roughly 30% of jar is represented. Rim diameter: 21 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 28 March, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 16
Date:
2001-03-28
Location(s) Facet:
Ngre Kataa
Subjects:
Jar
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-291
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-03-28
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre;8.11277778, -2.30611111
Date Digitized:
2016
Sketchfab Uid:
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

46. Everted-rim pottery jar, Kuulo Kataa, 1995

Description:
Photo of an everted-rim pottery jar (Vessel B) excavated from Kuulo Kataa, Mound 101, Unit 2W 2S, levels 6-7, where the jar was positioned upright. A broken pedestal base (Vessel A, originally part of another vessel) sat atop the jar. The jar has a carinated shoulder and a rounded base. Above the carination, the jar's exterior surface is decorated with four horizontal grooved lines, between which are lines of dentate impression. Immediately above the carination in three locations around the vessel's circumference are triangular clusters formed by three circulate punctates joined by short grooved lines enclosing dentate impressions. In a zone marked by two parallel grooved lines, the jar's base is surface treated with carved routlette impressions. Rim diameter 20.8 cm at interior lip. Vessel height (base to rim) 15.8 cm. Photo scale in cm. Kuulo Kataa, 9 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 101, Unit 2W 2S, Levels 5-7
Date:
1995-06-09
Location(s) Facet:
Kuulo Kataa
Subjects:
Jar; Dentate impression; Punctate; Grooving; Carved roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
KK 95-143, Vessel B
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-06-09
Genre Facet:
black-and-white negative
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2016
Sketchfab Uid:
Geographic Coordinates:
8.14847222, -2.37472222

47. Tanged iron blade, Ngre Kataa, 2009

Description:
A curved, tanged iron blade (brɔfiɛn in Nafaanra), slightly shouldered at the base (right), with a short narrow tang for the purpose of hafting to a wood handle. The tool shows signs of corrosion. The artfiact was excavated from a house mound. Scale in cm. Length: 19.1 cm. Weight: 54.7 g. Ngre Kataa, 4 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 28-30E, Level 7
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Blades (tool and equipment components); Cutting tools; Knives; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-113
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

48. Miniature iron shackles from a shrine cluster, Ngre Kataa, 2009

Description:
Miniature iron shackles (manacles). The artifact was excavated from a context that archaeologists interpret as a shrine located in metallurgical workshop. The shrine included many pottery jars and lids, iron bangles and other objects. The miniature shackles were placed inside a pottery jar, which was found lying on its side and broken. The shackles have been corroded by rust. Scale in cm. Width: 7.4 cm. Weight: 16.1 g. Site Ngre Kataa. 9-10 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19161
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3. Piece plot, 41cm S, 75 cm W, 83 cm bd
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Shackles; Iron; Leg irons; Handcuffs; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-171
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

49. Iron projectile point, Ngre Kataa, 2009

Description:
Triangular-headed iron projectile point with squared base (left) and long tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was excavated from what archaeologists interpret as a house mound. It shows signs of corrosion by rust. Scale in cm. Length: 9.6 cm. Weight: 12.6 g. Site Ngre Kataa. 3 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 6. Piece plot, 44 cm S, 127 cm W, 76 cmbd
Date:
2009-06-03
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-090
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-03
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

50. Iron projectile point, Ngre Kataa, 2009

Description:
Iron projectile point. The head (left) is asymmetrical, perhaps the result of its base being broken. The intact side of the base is shouldered. Two small barbs protrude from opposite sides of the point's long tang (right). To make an arrow, the tang would have been inserted into a shaft made of bamboo, reed or lightweight wood. This point was found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The artifact has been corroded by rusting. Scale in cm. Length: 10.1 cm. Weight: 8.9 g. Site Ngre Kataa. 4 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 3
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-110
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111