Number of results to display per page
Search Results
71. Carinated pottery bowl rim, Banda 27, 2001
- Description:
- Photo of a pottery bowl rim, exterior surface, with profile depicted (left). The bowl is decorated with several shallow horizontal grooves above its angular carination. A row of vertical impressions marks the carination, below which is a zone of angled "dentate" impressions, bounded by a shallow groove at its lower edge. Traces of red paint appear on the upper portions of the bowl. An INAA sample ("Banda 27-1") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 20 cm at the interior lip. Sherd represents an estimated 15% of the bowl's circumference. Scale in cm. Site Banda 27. 29 January, 2001.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Banda 27, Mound 1, Unit 1, Level 3
- Date:
- 2001-01-29
- Location(s) Facet:
- Site Banda 27
- Subjects:
- Dentate impression; Red paint; Bowl; Neutron Activation Analysis
- Subjects Facet:
- Archaeology; Pottery; Artifacts (Antiquities)
- Identifier:
- FS01-29A, INAA Banda 27-1
- Creator:
- Dr. Ann B. Stahl
- Contributors:
- Dr. N. Leith Smith
- Date searchable:
- 2001
- Date searchable:
- 2001-01-29
- Genre:
- 35 mm slide
- Genre Facet:
- 35 mm slide
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Banda 27;8.191119, -2.16954
- Date Digitized:
- 2016
- Sketchfab Uid:
- Geographic Coordinates:
- 8.191119, -2.16954
72. Burned feature, unit 50N 4W, Mound 6, Ngre Kataa, 2009
- Description:
- The circular outline of a burned basin (Feature 3) is bracketed by photo scales (center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17594
- Provenance:
- Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
- Date:
- 2009-06-29
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Burned basin
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009-06-29
- Date searchable:
- 2009
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
73. Burned feature in a metallurgical workshop, Mound 6, Ngre Kataa, 2009
- Description:
- The circular outline of a burned basin (Feature 3) is bracketed by photo scales (left of center) in unit 50N 4W (130 cm below the unit datum) at Mound 6. A pottery jar sits to the right side of the basin, its opening covered by a potsherd lid. To the left, a grinding stone sits, grinding surface down, over top of another pottery jar. Another grinding stone (far left) sits at a higher level in unit 50N 6W. A second burned feature is associated with a grinding stone tipped on its side, far right. Another pottery jar sits nearby, also lidded with a broken sherd. Burned features like these were associated with metal working in this Mound 6 workshop area. Photo scale at bottom in centimeters. Site Ngre Kataa. 29 June, 2009.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17593
- Provenance:
- Ngre Kataa, Mound 6, 50N 4W, 130 cm bd
- Date:
- 2009-06-29
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Burned basin
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Handicraft; Metalworking; Metallurgy; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009-06-29
- Date searchable:
- 2009
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
74. Copper wire finger ring in situ, Mound 6, Ngre Kataa, 2009
- Description:
- A finger ring made of twisted copper alloy wire is photographed in situ. Base of level 5, unit 44N 4W, Mound 6, Ngre Kataa. Scale in 5 centimeter increments. Ngre Kataa, 8 July, 2009.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17105
- Provenance:
- Ngre Kataa, Mound 6, 44N 4W, Level 5. Piece plot: 104 cm S, 153 cm W, 118 cm bd
- Date:
- 2009-07-08
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Rings (finger jewelry); Ornaments; Copper alloys; Wire
- Identifier:
- Catalog number SF-NK-09-403
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009-07-08
- Date searchable:
- 2009
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
75. North wall, unit 46N 2W, Mound 6, Ngre Kataa, 2009
- Description:
- The mouth of a perforated shrine pot (left) is covered with the pedestaled base of another pot. It remains in situ as the surrounding areas of unit 46N 2W are excavated to lower levels. Behind, the stratified layers of Mound 6 are visible in the unit's north wall. Center (back) are a series of anvil and grinding stones exposed at higher mound levels in other excavation units. During excavations in 2008, a cluster of four anvil/grinding stones was found at a level slightly higher than but adjacent (left/west) to the perforated pot. At right, in lower levels, two grinding stones rest at an angle in association with a burned feature. Archaeologists interpret Mound 6 as a metallurgical workshop at which stratified levels built up through repeated use of the same location. Photo scale in centimeters. Site Ngre Kataa. 2 July, 2009.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19131
- Provenance:
- Ngre Kataa, Mound 6, unit 46N 2W
- Date:
- 2009-07-02
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Stratigraphy
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009-07-02
- Date searchable:
- 2009
- Genre:
- Digital image
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
76. Everted-rim pottery jar, site A-212, 2001
- Description:
- A partially reconstructed everted-rim pottery jar excavated from Banda area site A-212, Mound 7, level 10. The jar's exterior surface is decorated below the neck with closely spaced rows of dentate (comb) impressions, intersected by a double diagonal line of dentate impressions. Double lines of dentate impression applied in a chevron pattern form a band between the upper zone of dentate decoration and jar's plain base. The jar's interior is finished with an orange-red slip. An INAA sample ("A212-16") from this jar and was assigned to the "G1" group of ceramic fabrics and therefore likely made west of the Banda hills. Rim diameter 24 cm at exterior lip. Photo scale in cm. Site A-212. 1 February, 2001.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- A-212, Mound 7, Unit 1, Level 10
- Date:
- 2001-02-19
- Location(s) Facet:
- Site A212
- Subjects:
- Jar; Dentate impression; Neutron Activation Analysis
- Subjects Facet:
- Archaeology; Pottery; Artifacts (Antiquities)
- Identifier:
- FS01-78, INAA A212-16
- Creator:
- Dr. Ann B. Stahl
- Contributors:
- Dr. N. Leith Smith
- Date searchable:
- 2001-02-19
- Date searchable:
- 2001
- Genre:
- 35 mm slide
- Genre Facet:
- 35 mm slide
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- A-212;8.337343, -2.45727
- Date Digitized:
- 2016
- Sketchfab Uid:
- Commentary:
- Slide scanned by Veronique Plante
- Geographic Coordinates:
- 8.337343, -2.45727
77. Carinate globular pottery jar, Kuulo Kataa, 1995
- Description:
- Photo of a reconstructed carinate globular pottery jar, with profile depicted (left). The jar was found in an upright position beneath a lens of hardened clay, its rim at 211 cm below datum and its base at 224 cm bd. The jar's mouth is small. Below its lip is a ridge marked with vertical impressions. The surface above the carinated shoulder is decorated with alternating horizontal lines of dentate (comb) impression and grooving. Below the carination, the base and lower portions of the jar are decorated with a carved roulette impression. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. An INAA sample (NA "KK 95-61") from this jar was assigned to the "K1" group of ceramic fabrics. The jar was therefore likely made east of the Banda hills. A jar of similar form, decoration, and interior wear (KK 95-693) was found one meter away and at a slightly lower level in the east profile wall of the excavation unit. Rim diameter: 8 cm. Photo scale in cm. Kuulo Kataa. 13 June, 1995.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17628
- Provenance:
- Kuulo Kataa, Mound 101, Unit 2W 2S, Level 18, 211-224 cm bd
- Date:
- 1995-06-13
- Location(s) Facet:
- Kuulo Kataa
- Subjects:
- Jar; Dentate impression; Carved roulette; Grooving; Neutron Activation Analysis
- Subjects Facet:
- Pottery; Archaeology; Artifacts (Antiquities)
- Identifier:
- KK 95-350; NA KK 95-61
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 1995
- Date searchable:
- 1995-06-13
- Genre:
- 35 mm slide
- Genre Facet:
- 35 mm slide
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Kuulo Kataa;8.14847222, -2.37472222
- Date Digitized:
- 2016
- Sketchfab Uid:
- Commentary:
- Slide scanned by Veronique Plante
- Geographic Coordinates:
- 8.14847222, -2.37472222
78. Carinate globular pottery jar, exterior, Kuulo Kataa, 1995
- Description:
- Photo of a patially reconstructed carinate globular pottery jar, with profile depicted (left). The jar was partially exposed, sitting upright in the east profile wall of the unit. The jar broke insitu and half of the vessel was removed and reconstructed. The jar has a narrow mouth. Alternating horizontal bands of shallow grooving and dentate (comb) impression decorate the area below the lip. A horizontal grooved line and a line of dentate (comb) impression applied above the carinated shoulder meet at small circular punctate impressions. The base and lower portions of the jar are decorated with a carved roulette impression. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. A jar of similar form, decoration and interior wear was found one meter away and at a slightly higher level in the same unit (KK 95-350). Rim diameter: 10 cm. 50% of vessel reconstructed. Photo scale in cm. Kuulo Kataa. 10 July, 1995.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17629; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17625; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17552
- Provenance:
- Kuulo Kataa, Mound 101, Unit 2W 2S, East Profile, c. 219 cm below datum
- Date:
- 1995-07-10
- Location(s) Facet:
- Kuulo Kataa
- Subjects:
- Jar; Dentate impression; Punctate; Carved roulette; Grooving
- Subjects Facet:
- Archaeology; Pottery; Artifacts (Antiquities)
- Identifier:
- KK 95-693
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 1995
- Date searchable:
- 1995-07-10
- Genre:
- 35 mm slide
- Genre Facet:
- 35 mm slide
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Kuulo Kataa;8.14847222, -2.37472222
- Date Digitized:
- 2016
- Sketchfab Uid:
- Commentary:
- Slide scanned by Veronique Plante
- Geographic Coordinates:
- 8.14847222, -2.37472222
79. Carinate globular pottery jar, interior, Kuulo Kataa, 1995
- Description:
- Photo (interior) of a reconstructed carinate globular pottery jar, with profile depicted (left). The jar was partially exposed, sitting upright in the east profile wall of the unit. The jar broke insitu and half of the vessel was removed and reconstructed. The jar has a narrow mouth. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. A jar of similar form, decoration and interior wear was found one meter away and at a slightly higher level in the same unit (KK 95-350). Rim diameter: 10 cm. 50% of vessel reconstructed. Photo scale in cm. Kuulo Kataa. 10 July, 1995.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17628; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17625; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17552
- Provenance:
- Kuulo Kataa, Mound 101, Unit 2W 2S, East Profile
- Date:
- 1995-07-10
- Location(s) Facet:
- Kuulo Kataa
- Subjects:
- Jar
- Subjects Facet:
- Archaeology; Pottery; Artifacts (Antiquities)
- Identifier:
- KK 95-693, Pot 2
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 1995
- Date searchable:
- 1995-07-10
- Genre:
- 35 mm slide
- Genre Facet:
- 35 mm slide
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Kuulo Kataa;8.14847222, -2.37472222
- Date Digitized:
- 2016
- Sketchfab Uid:
- Commentary:
- Slide scanned by Veronique Plante
- Geographic Coordinates:
- 8.14847222, -2.37472222
80. Recurved jar rim, Kuulo Kataa, 1995
- Description:
- Photo of an inward-curving (recurved) jar rim sherd, with profile depicted (left). A zone of diagonally oriented dentate (comb) impressions is bounded on upper and lower edges by a shallow horizontal groove. A mica paint/slip was applied over top of the dentate impressions. The ceramic fabric was tempered with angular quartz grit. An INAA sample ("KK NA-29") was unassigned to a specific group of ceramic fabrics, lending no insight into where the jar was made. Interior neck diameter: 18 cm. Sherd represents an 12% of the jar's circumference. Scale in cm. Kuulo Kataa. 25 June, 1995.
- Rights:
- Creative Commons Attribution--NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Kuulo Kataa, Mound 101, Unit 2W 2S, Level 25
- Date:
- 1995-06-25
- Location(s) Facet:
- Kuulo Kataa
- Subjects:
- Mica slip; Dentate impression; Jar; Neutron Activation Analysis
- Subjects Facet:
- Archaeology; Pottery; Artifacts (Antiquities)
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 1995
- Date searchable:
- 1995-06-25
- Genre:
- 35 mm slide
- Genre Facet:
- 35 mm slide
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Kuulo Kataa;8.14847222, -2.37472222
- Date Digitized:
- 2016
- Sketchfab Uid:
- Commentary:
- Slide scanned by Veronique Plante
- Geographic Coordinates:
- 8.14847222, -2.37472222