Search

Start Over Subject(s) archaeology Format image

101. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also finely crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known source group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19004
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 15, South Wall
Date:
2001-04-05
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Carved roulette; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-318, Vessel 1A
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-05
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

102. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, Levels 4-5. The jar (Vessel 3) was found sitting upright in association with a cluster of several other complete and broken pots (Vessels 1 & 2) in what has been interpreted as a kitchen area. Most of the jar has been surface treated with a twisted cord roulette. Single pendant grooved lines surround the circumference of the jar. A total of five circular impressions, perhaps made with a hollow reed, are placed below the intersection points of the pendant grooves. A hole in the base of the pot (ca. 7 cm across) may have been deliberately broken in this otherwise whole pot. Rim diameter: 17.5 cm at exterior lip. Site Ngre Kataa ("Banda 40"). 3 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-18299; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19007
Provenance:
Ngre Kataa (Banda 40), Mound 1, Unit 1, Levels 4-5
Date:
2001-04-03
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Cord roulette; Punctate; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-333, Vessel 3
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2002-03-04
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

103. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 1, Unit 1, Levels 4-6. The jar (Vessel 2) was found sitting upright in association with a cluster of several other complete (Vessels 1 & 3) and broken pots in what has been interpreted as a kitchen area. The upper surface of the round-based jar is undecorated. In a zone bounded by double grooved lines, the base and lower surface of the jar is surface treated with maize cob roulette. Groups of three circular punctates mark the spots where gooved lines meet. A hole in the base of the pot (4 x 3.5 cm) may have been deliberately broken in this otherwise whole pot. Rim diameter: 20.5 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 4 March, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-18299; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19006
Provenance:
Ngre Kataa (Banda 40), Mound 1, Unit 1, Levels 4-6
Date:
2001-04-03
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Maize cob roulette; Punctate; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-334, Vessel 2
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-03
Genre Facet:
35 mm slide
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

104. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, levels 15-16, where the jar was exposed in the south wall of the excavation unit. The jar has a carinated shoulder and a rounded base. The area above the carination was decorated by five unevenly placed horizontal grooved lines. In three places around the vessel's circumference, the grooved line just above the carination is marked by "ꓥ." In a zone that begins c. 2 cm below the carination, lower areas of the jar are surface treated with a carved roulette impression. The ceramic fabric includes mixed grit (including laterite and quartz) and likely also fine crushed slag. An INAA sample (Banda 40/3) from the jar could not be assigned to a known group. Roughly 2/3 of the vessel present. Rim diameter: 22.5 cm at interior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 5 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 15, South Wall
Date:
2001-04-05
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Carved roulette; Grooving
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-318, Vessel 1A
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-05
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

105. Everted-rim pottery jar, Kuulo Kataa, 1995

Description:
Photo of an everted-rim pottery jar (Vessel B) excavated from Kuulo Kataa, Mound 101, Unit 2W 2S, levels 6-7, where the jar was positioned upright. A broken pedestal base (Vessel A, originally part of another vessel) sat atop the jar. The jar has a carinated shoulder and a rounded base. Above the carination, the jar's exterior surface is decorated with four horizontal grooved lines, between which are lines of dentate impression. Immediately above the carination in three locations around the vessel's circumference are triangular clusters formed by three circulate punctates joined by short grooved lines enclosing dentate impressions. In a zone marked by two parallel grooved lines, the jar's base is surface treated with carved routlette impressions. Rim diameter 20.8 cm at interior lip. Vessel height (base to rim) 15.8 cm. Photo scale in cm. Kuulo Kataa, 9 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 101, Unit 2W 2S, Levels 5-7
Date:
1995-06-09
Location(s) Facet:
Kuulo Kataa
Subjects:
Jar; Dentate impression; Punctate; Grooving; Carved roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
KK 95-143, Vessel B
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-06-09
Genre Facet:
black-and-white negative
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Date Digitized:
2016
Geographic Coordinates:
8.14847222, -2.37472222

106. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim pottery jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 20. The jar was located in the west profile wall of the unit. The jar has a carinated shoulder and a rounded base. A single horizontal line of wavy line impression was applied to the neck constriction, with the area above the carination otherwise plain. The base of the jar is surface treated with a fiber (perhaps braided strip) roulette. Two roughly parallel horizontal grooved lines are superimposed over the roulette treatment. Whole pot. Rim diameter 17.5 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 3 April, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 20, W Wall.
Date:
2001-04-03
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Wavy line impression; Fiber roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-332, Vessel 1
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-04-03
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Date Digitized:
2016
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

107. Everted-rim pottery jar, Ngre Kataa, 2001

Description:
Photo of an everted-rim jar excavated from Ngre Kataa, Mound 4, Unit 1, Level 16. The undecorated exterior surface of the round-based jar is orange-brown from firing, with areas of black fire-clouding. Roughly 30% of jar is represented. Rim diameter: 21 cm at exterior lip. Photo scale in cm. Site Ngre Kataa ("Banda 40"). 28 March, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa (Banda 40), Mound 4, Unit 1, Level 16
Date:
2001-03-28
Location(s) Facet:
Ngre Kataa
Subjects:
Jar
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-291
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-03-28
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre;8.11277778, -2.30611111
Date Digitized:
2016
Commentary:
Slide scanned by Veronique Plante
Geographic Coordinates:
8.11277778, -2.30611111

108. Iron projectile point, Ngre Kataa, 2008

Description:
Triangular-headed iron projectile point with a single barb at the base of its head (left) and a long thin tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a shaft made of bamboo, reed or lightweight wood to which it was hafted. The artifact shows signs of corrosion. The point was excavated from a deep midden mound in an disturbed by a pig burrow. Scale in cm. Length: 12.4 cm. Weight: 14.2 g. Site Ngre Kataa. 25 June, 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 12
Date:
2008-06-25
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 08-011
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-06-25
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

109. Tanged iron blade, Kuulo Kataa, 2000

Description:
An iron blade, rounded at the tip (left), flared at the base and with a short tang (right) which allowed it to be hafted to a wood handle. The tool shows signs of corrosion. The blade was excavated from a level characterized by abundant iron slag and ashy soil. Scale in cm. Site Kuulo Kataa. 23 June, 2000.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 131, Unit 126E 140N, Level 10
Date:
2000-06-23
Location(s) Facet:
Kuulo Kataa
Subjects:
Tanged blade; Iron tool
Subjects Facet:
Iron; Blades (tool and equipment components); Archaeology; Artifacts (Antiquities)
Identifier:
SF KK 00-193
Creator:
Dr. Ann B. Stahl
Date searchable:
2000
Date searchable:
2000-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Geographic Coordinates:
8.14847222, -2.37472222

110. Tanged iron blade, Kuulo Kataa, 1995

Description:
A curved iron blade (brɔfiɛn in Nafaanra), rounded at the tip (left), slightly shouldered at the base, with a long tang (right) for the purpose of hafting. The tool shows signs of corrosion. The artfiact was excavated from a house mound and found in a level of midden-like deposits. Scale in cm. Length: 11.2 cm. Weight: 11.7 gm. Site Kuulo Kataa. 14 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 118, Unit 66W 14N, Level 4
Date:
1995-06-14
Location(s) Facet:
Kuulo Kataa
Subjects:
Iron tool
Subjects Facet:
Blades (tool and equipment components); Cutting tools; Knives; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF KK 95-089
Creator:
Dr. Ann B. Stahl
Date searchable:
1995
Date searchable:
1995-06-14
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Kuulo Kataa;8.14847222, -2.37472222
Geographic Coordinates:
8.14847222, -2.37472222

111. Tanged iron blade, Ngre Kataa, 2008

Description:
Tanged iron blade with pointed tip (left) and rounded shoulders. Two large concretions adhere to the blade's corroded surface. The tang (right) would have allowed the blade to be hafted to a wooden or bamboo shaft or handle. If hafted to a long shaft, it may have been used as a spear (chombo in Nafaanra). This artifact was found closely associated with a copper alloy twinned figurine, an iron bangle, a rounded quartz pebble and several other objects, which archaeologists interpret as a shrine cluster. The cluster was placed among metal-working features in a metallurgical workshop. Scale in cm. Length: 8.6 cm. Weight: 12.6 g. Site Ngre Kataa. 19 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19086; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17600; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19085
Provenance:
Ngre Kataa, Mound 6, Unit 44N 6W, Feature 5. Piece plot, 15-20 cm S, 161-167 cm W, 78 cm bd
Date:
2008-07-19
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Blades (tool and equipment components); Cutting tools; Knives; Iron; Archaeology; Shrines; Artifacts (Antiquities)
Identifier:
SF NK 08-207
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-19
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

112. Miniature iron shackles from a shrine cluster, Ngre Kataa, 2009

Description:
Miniature iron shackles (manacles). The artifact was excavated from a context that archaeologists interpret as a shrine located in metallurgical workshop. The shrine included many pottery jars and lids, iron bangles and other objects. The miniature shackles were placed inside a pottery jar, which was found lying on its side and broken. The shackles have been corroded by rust. Scale in cm. Width: 7.4 cm. Weight: 16.1 g. Site Ngre Kataa. 9-10 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19161
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3. Piece plot, 41cm S, 75 cm W, 83 cm bd
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Shackles; Iron; Leg irons; Handcuffs; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-171
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

113. Iron projectile point, Ngre Kataa, 2009

Description:
Triangular-headed iron projectile point with squared base (left) and long tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was excavated from what archaeologists interpret as a house mound. It shows signs of corrosion by rust. Scale in cm. Length: 9.6 cm. Weight: 12.6 g. Site Ngre Kataa. 3 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 6. Piece plot, 44 cm S, 127 cm W, 76 cmbd
Date:
2009-06-03
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-090
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-03
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

114. Iron projectile point, Ngre Kataa, 2008

Description:
Triangular-headed projectile point with barbs on either side of the head's base (left). Its long tang (right) is bent. To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found in an area that archaeologists interpret as a metallurgical workshop. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 9.8 cm. Weight: 10.2 g. Site Ngre Kataa. 5 July, 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 44N 6W, Level 3; piece plot: 67-71 cm S, 142-156 W
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 08-112a
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

115. Iron projectile point, Ngre Kataa, 2009

Description:
Asymmetrical barbed iron projectile point with a bent shaft. This artifact was found in an area that archaeologists interpret as a metallurgical workshop. It was found near--and may have been part of--a large cluster of objects interpreted as a shrine. The (partial?) point has been corroded by rusting. Scale in cm. Length: 9.1 cm. Weight: 11.3 g. Site Ngre Kataa, 6 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 6. Piece plot, 5 cm S, 5 cm W, 102 cm bd
Date:
2009-07-06
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-384
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

116. Tanged iron blade, Ngre Kataa, 2009

Description:
A curved, tanged iron blade (brɔfiɛn in Nafaanra), slightly shouldered at the base (right), with a short narrow tang for the purpose of hafting to a wood handle. The tool shows signs of corrosion. The artfiact was excavated from a house mound. Scale in cm. Length: 19.1 cm. Weight: 54.7 g. Ngre Kataa, 4 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 28-30E, Level 7
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Blades (tool and equipment components); Cutting tools; Knives; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-113
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

117. Red-painted pottery bowl, Banda 27, 2001

Description:
Photo of a pottery bowl rim, interior view, with profile depicted (left). The shallow bowl's flattened rim is decorated with intersecting red painted lines, and the interior surface with zones of red paint. A narrow band of red paint appears on the external lip of the bowl, which has an otherwise plain exterior surface. An INAA sample ("Banda 27-7") from this bowl was assigned to the "K2" group of ceramic fabrics. It was therefore likely made from clays mined east of the Banda hills. Rim diameter: 26 cm at the interior lip. Sherd represents an estimated 12% of the bowl's circumference. Scale in cm. Site Banda 27. 27 January, 2001.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Banda 27, Mound 2, Unit 1, Level 3
Date:
2001-02-27
Location(s) Facet:
Site Banda 27
Subjects:
Red paint; Bowl; Neutron Activation Analysis
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
FS01-119B, INAA Banda 27-7
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. N. Leith Smith
Date searchable:
2001
Date searchable:
2001-02-27
Genre Facet:
35 mm slide
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Banda 27;8.191119, -2.16954
Date Digitized:
2016
Commentary:
Slide scanned by Ann B. Stahl
Geographic Coordinates:
8.191119, -2.16954

118. Iron projectile point, Ngre Kataa, 2009

Description:
Triangular-headed iron projectile point (SF 09-033) with a slightly squared base (left ) and a short tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found close to several anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 8.1 cm. Weight: 9.3 g. Site Ngre Kataa. 30 May 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19181
Provenance:
Ngre Kataa, Mound 6, Unit 48N 2W, Level 5. Piece plot: 53 cm S, 20 cm W
Date:
2009-05-30
Location(s) Facet:
8.11277778, -2.30611111
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-033
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-30
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

119. Iron projectile point, Ngre Kataa, 2009

Description:
Iron projectile point. The head (left) is asymmetrical, perhaps the result of its base being broken. The intact side of the base is shouldered. Two small barbs protrude from opposite sides of the point's long tang (right). To make an arrow, the tang would have been inserted into a shaft made of bamboo, reed or lightweight wood. This point was found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The artifact has been corroded by rusting. Scale in cm. Length: 10.1 cm. Weight: 8.9 g. Site Ngre Kataa. 4 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 3
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-110
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

120. Iron projectile point, Ngre Kataa, 2008

Description:
Triangular-headed iron projectile point with a barb at the head's base (left) and a long tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found in an area (mound 7) that archaeologists interpret as a house mound. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 9 cm. Weight: 9.2 g. Site Ngre Kataa. 7 July, 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 14N 24E, Level 2
Date:
2008-07-07
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 08-128
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-07
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

121. Artifact cluster, Mound 6, Ngre Kataa, 2009

Description:
A tri-looped iron bangle (SF 09-158) and a flat iron disc (SF 09-159) exposed insitu between two stones. The surfaces of the stones showed signs of use for grinding. This group of objects (cluster D) was found near--and may have been part of--a larger cluster of objects (A-D) that archaeologists interpret as a shrine placed over stratified deposits in a metallurgical workshop. Photo scale marked in 5 cm intervals. Arrow pointing north. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19101; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, base Level 4
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Bangles; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

122. Shrine cluster, Mound 6, Ngre Kataa, 2008

Description:
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a lost-wax-cast twinned figurine (bottom center), an iron bangle (center), a waterworn quartz pebble, a bone fragment (upper left of bangle), a broken iron blade (left of the bone fragment) and a tanged iron blade (upper left of the bangle). An irregularly shaped quartzite cobble (upper left) may have been part of the cluster. Photo scale in cm, arrow pointing north. Site Ngre Kataa. 19 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19084; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19085; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17600
Provenance:
Ngre Kataa, Mound 6, Unit 44N 6W, Feature 5
Date:
2008-07-19
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Shrines; Excavations (Archaeology); Figures; Bangles; Blades (tool and equipment components)
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-19
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

123. Iron projectile point, Ngre Kataa, 2008

Description:
Iron projectile point fragment. The elongated head (left) has a single barb at its base and a short tang (right). The point has been corroded by rusting. Scale in cm. Length: 11.3 cm. Weight: 14 g. Site Ngre Kataa. 26 June 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 8, Unit 8N 127E, Level 14
Date:
2008-06-26
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 08-024
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-06-26
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

124. Tri-looped iron bangle, Ngre Kataa, 2009

Description:
A tri-looped iron bangle (SF 09-158). The bangle was formed from a single round iron rod, looped three times at the top (detail, left). The rod is joined with a single twist at the base, with each end of the rod overlaid by a thin iron strap (bottom), causing slight thickening on either side of the twisted base. The bangle was found in close association with a flat iron disc (SF 09-159) and two stones whose surfaces showed evidence of grinding (cluster D). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.5 cm. Weight: 30.2 g. Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 195 cm S, 22 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-158
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

125. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the stone is a partial pottery vessel--unusual for its layered construction (NK 09-787). To the right of the partial pot are two flat iron discs (larger, above, SF 09-370 and smaller, below SF 90-371). The smaller grinding stone (upper left of photo) rested, grinding surface down, on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Coverage:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

126. Iron disc, Ngre Kataa, 2009

Description:
A flat, thin iron disk. The object is corroded by rust. Its function is unknown. The disc was found in close association with a large anvil or grinding stone and adjacent to a distinctive pottery vessel and a smaller, irregularly shaped piece of flat iron (SF 09-171). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 9.4 cm. Thickness: .2 cm. Weight: 49.3 g. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 134-140 cm S, 144-151 cm W, 100-107 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 09-370
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

127. Iron disc, Ngre Kataa, 2009

Description:
Flat, thin iron disk (SF 09-159). The object is corroded by rust and its edges notched in two spots. Its function is unknown. The disc was found in a cluster (cluster D) with an iron bangle (SF 09-158) and two stones whose surfaces showed evidence of grinding. The cluster was part of a wider feature (clusters A-D) that archaeologists interpret as a shrine, which overlaid stratified deposits in a metallurgical workshop (mound 6). Scale in cm. Width: 8.1 cm. Thickness: .2 cm. Weight: 29.8 g. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19101
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 194 cm S, 4 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 09-159
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

128. Iron projectile point fragment, Ngre Kataa, 2009

Description:
Partial iron projectile point, the tip of the head (left) broken off. The base of the head forms a right angle barb with the short tang. The tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood to form an arrow. This point was found in an area (mound 7) that archaeologists interpret as a house mound. The artifact is corroded by rust. Scale in cm. Length: 9.1 cm. Weight: 13.6 g. Site Ngre Kataa. 4 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 8
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-114
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

129. 17-19103

Description:
A flat, irregularly shaped iron with circular depression. The object is corroded by rust and its original form and function are unknown. It was found in close association with a large anvil or grinding stone (GS 09-15), a circular iron disk (SF 09-370) and a distinctive pottery vessel (NK 09-787). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 5.7 cm. Thickness: .2 cm. Weight: 9 g. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 130-134 cm S, 152-155 cm W, 109-112 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 90-371
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

130. Burned features, unit 46N 2W, Ngre Kataa, 2009

Description:
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

131. Copper alloy (brass) bar, Ngre Kataa, 2009

Description:
A piece of a copper alloy (brass) bar, found in association with burned features that archaeologists interpret as linked to metalworking (left: side view; right, end views). The bar is square in cross-section (right). One end appears finished and has a slight circular depression or dimple (bottom right). The other end (top right) is jagged and appears to be broken from a longer bar. The artifact was recovered from soil associated with an amorphous burned feature, underneath which were a series of burned basins likely created by forging activities. The object is similar in appearance to brass bars known from the Ma'adin Ijafen cache of brass ingots documented by Theodore Monod in eastern Mauritania in the 1960s. As such, this may be the form in which metalworkers got the copper alloys that were worked at the site. Length: 1.7 cm. Weight: 2.8 g. Scale in cm. Site Ngre Kataa. 25 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 5. Piece plot: 198 cm W, 88 cm S, 110 cm bd
Date:
2009-06-25
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Artifacts (Antiquities); Copper alloys; Metalworkinig
Identifier:
SF 09-293
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-25
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

132. Burned features unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned features is exposed in the northwest corner of excavation unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). Along the unit's west wall (left in photo) is an amorphous zone of fire-hardened red (Munsell color 2.5YR 3/6) matrix. A piece of brass bar (SF NK 09-293) was found in soil associated with this burned feature. Above and to the right (northeast), two circular burned features are visible in outline. These basin-shaped features had a thin lining of fire-hardened sediment, red to dark red (Munsell 2.5 YR 3/6 & 4/8) in color. The basins were filled with loose ashy sediment and small pieces of charcoal. A sample of burned matrix from feature 1 (top right basin) yielded a thermoluminescence (TL) age estimate of 1500 +/- 40 CE (Univ. Wash. 2455). Further excavation revealed additional basin-shaped features beneath the amorphous burned feature. The excavation unit's northwest corner peg is visible, upper left. View looking north. Site Ngre Kataa. 27 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19109; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19111
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-27
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-07
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

133. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

134. Excavated burned basins, unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned basin-shaped features is exposed in the northwest corner of unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). The basins comprised a thin layer of fire-hardened sediment, red to dark red (Munsell colors 2.5 YR 3/6 & 4/8) in color. Basin features 1 (top right) and 2 (left of feature 1) measured about 8-9 cm deep and were filled with ashy soil. Basin feature 5 (far left) was shallower. Its fire-hardened surface showed a pinkish tinge. Samples of burned basin matrix from features 1 and 5 yielded thermoluminescence (TL) age estimates of 1500 +/- 40 CE (feature 1; Univ. Wash. 2455) and 1580 +/- 40 CE (feature 5; Univ. Wash. 2456). Photo bar marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 29 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-29
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

135. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:
Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:
2009-06-23
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

136. Burned feature, unit 46N 2W, Ngre Kataa, 2009

Description:
Two views of a burned basin-shaped feature (Feature 2) in mound 6, unit 46N 2W, part of an area that archaeologists interpret as a metallurgical workshop. The feature has been sectioned to reveal its profile. Viewed from the top, the circular feature consists of a ring of fire-hardened yellowish red (Munsell color 5YR 5/8) sediment. The fire-hardened matrix is thicker at its top edge than it is at the bottom of the basin, where its color is dark red (Munsell 2.5YR 3.6). In profile view (second photo), the basin appears as a narrow band of yellowish red fire-hardened sediment. The fire-hardened sediment is thin and rounded at the base of the basin, suggesting that it may have formed around a round-based vessel used to heat metals. A thermoluminescence sample of the burned matrix yielded a date of 1490 +/- 50 years (Univ. Wash. 2364). Photo scale in cm. Site Ngre Kataa. 23 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19112
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W, L7
Date:
2009-06-23
Location(s) Facet:
8.11277778, -2.30611111
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-23
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

137. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

138. Anvil stones in a metallurgical workshop, mound 6, Ngre Kataa, 2009

Description:
Excavations uncovered three insitu boulders placed in a row that were used as anvil stones in an area interpreted as a metallurgical workshop. Multiple surfaces of the boulders show signs of wear caused by hammering and grinding. Repeated use of the anvil stone in the foreground (GS 09-03) has created a clear depression on its upper surface and its left side is flattened by wear. The middle anvil stone (GS 09-02) has multiple depressions created by use on its upper surface. The anvil in the rear of the photo (GS 09-01) shows wear on its top and side surfaces, with dirt still embedded in a deep cup-shaped depression on its south-facing side in this photo. To the east (right) of the boulder in foreground, the flat surface of a grinding stone (GS 09-04) is visible in the east wall of the excavation unit. A broken pedestal base of a pot sits on its side to the east (right) of the middle anvil stone. In the upper left corner of the photo, a burned feature interpreted by archaeologists as the remains of a forge has been exposed. The red-and-white band above the photo sign is a two meter scale, marked in 10 cm increments. View looking north across two exavation units: 50N 2W (top of photo) and 48N 2W (bottom of photo). The 2x2m units have been excavated to slightly different depths. Site Ngre Kataa. 1 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19121; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19181; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19182
Provenance:
Ngre Kataa, Mound 6, Units 48N 2W and 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

139. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Two stones showing evidence of use as grinding stones sit nearby, a north arrow placed by one(GS 09-10; center photo) and one in the southwest corner of the excavation unit (GS 09-08; bottom right). Another insitu anvil stone (GS 09-6) sits in the northeast corner of an adjacent excavation unit (48N 0W; top right of photo). The narrow band of loose soil angled across the southwest corner of the excavation was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19119
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

140. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:
The south wall of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop. An anvil stone (GS 09-06; left of the sign board) is pedestaled insitu in the adjacent excavation unit (48N 0W). Other pedestaled grinding stones are visible to the right and behind the sign board. These stones were found just below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below the anvil stone. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Ashy lenses are visible in the south and west walls. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Width of unit: 2 meters. Site Ngre Kataa. 9 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19116
Provenance:
Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:
2009-07-09
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

141. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

142. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-01) sits insitu in an excavated area interpreted as a metallurgical workshop. This was one of several boulders associated with burned features and other residues of metalworking. The boulder's upper surface showed signs of use wear and its south-facing side is marked by a deep cup-shaped depression that resulted from repeated use. A burned feature interpreted as the remains of a forge is visible behind the anvil stone (upper left) in the northwest corner of excavation unit 50N 2W. Flat photo scale in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

143. Insitu grinding stone and jar, mound 6, Ngre Kataa, 2008

Description:
View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19128
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, Level 3
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

144. Everted-rim pottery jar, Ngre Kataa, 2008

Description:
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:
2008-07-15
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Punctate; Cord roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
NK 08-406
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-15
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

145. Insitu anvil/grinding stones, Ngre Kataa, 2008

Description:
A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596
Provenance:
Ngre Kataa, Mound 6, Unit 46N 4W, Level 3
Date:
2008-07-03
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-03
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

146. Everted-rim pottery jar, Ngre Kataa, 2008

Description:
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:
2008-07-15
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Punctate; Cord roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
NK 08-406
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-15
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

147. Pottery jar, mound 6, Ngre Kataa, 2008

Description:
Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19127
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W. Piece plot: 145-160 cm W, 12-30 cm S, 46-63 cm bd
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Fiber roulette
Subjects Facet:
Archaeology; Artifacts (Antiquities); Pottery
Identifier:
NK 08-176
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

148. Burned feature and stone hammer, Ngre Kataa, 2008

Description:
A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

149. Insitu grinding stone, Ngre Kataa, 2008

Description:
A large grinding stone (GS 08-04) rests insitu along the south edge of unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone's visible surface is concave in profile, a result of use. The surface that is oriented face down exhibited greater wear from grinding. The white marks on the stone's upper surface were created by excavators' tools as they dug. A piece of copper alloy rod (greenish in color, SF 08-53) is visible insitu in soil below the center of the grindstone. Root fragments are seen in the surrounding soil. Photo scale in cm. View looking south. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19130
Provenance:
Ngre Kataa, Mound 6, Unit 48N 4W, Level 4
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Copper alloy
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

150. Slag and copper alloy rod, Ngre Kataa, 2008

Description:
A small piece of slag (top) and a copper alloy ( brass) rod fragment (bottom, SF 08-053). The greenish hue of the rod is a product of weathering. These artifacts were found next to one another in unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. They were found adjacent to and below a large grinding stone (GS 08-04). Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19129
Provenance:
Ngre Kataa, Mound 6, Unit 48N 4W, Level 4. Piece plot 178 cm S, 142 cm W, 54 cm bd.
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Slag
Subjects Facet:
Copper alloys; Artifacts (Antiquities); Archaeology
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111