Date: 2008 / Genre: digital image / Location(s): ngre kataa / Format: image - Improving African Futures Using Lessons from the Past

Start Over Date 2008 Genre digital image Location(s) ngre kataa Format image

11. Everted-rim pottery jar, Ngre Kataa, 2008

Description:: Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:: Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:: 2008-07-15
Location(s) Facet:: Ngre Kataa
Subjects:: Jar; Punctate; Cord roulette
Subjects Facet:: Archaeology; Pottery; Artifacts (Antiquities)
Identifier:: NK 08-406
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-15
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

12. Insitu anvil/grinding stones, Ngre Kataa, 2008

Description:: A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596
Provenance:: Ngre Kataa, Mound 6, Unit 46N 4W, Level 3
Date:: 2008-07-03
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Anvil stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-03
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

13. Everted-rim pottery jar, Ngre Kataa, 2008

Description:: Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:: Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:: 2008-07-15
Location(s) Facet:: Ngre Kataa
Subjects:: Jar; Punctate; Cord roulette
Subjects Facet:: Archaeology; Pottery; Artifacts (Antiquities)
Identifier:: NK 08-406
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-15
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

14. Pottery jar, mound 6, Ngre Kataa, 2008

Description:: Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19127
Provenance:: Ngre Kataa, Mound 6, Unit 44N 4W. Piece plot: 145-160 cm W, 12-30 cm S, 46-63 cm bd
Date:: 2008-07-01
Location(s) Facet:: Ngre Kataa
Subjects:: Jar; Fiber roulette
Subjects Facet:: Archaeology; Artifacts (Antiquities); Pottery
Identifier:: NK 08-176
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-01
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

15. Burned feature and stone hammer, Ngre Kataa, 2008

Description:: A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
Provenance:: Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:: 2008-07-05
Location(s) Facet:: Ngre Kataa
Subjects Facet:: Excavations (Archaeology); Archaeology; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-05
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

16. Insitu grinding stone, Ngre Kataa, 2008

Description:: A large grinding stone (GS 08-04) rests insitu along the south edge of unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone's visible surface is concave in profile, a result of use. The surface that is oriented face down exhibited greater wear from grinding. The white marks on the stone's upper surface were created by excavators' tools as they dug. A piece of copper alloy rod (greenish in color, SF 08-53) is visible insitu in soil below the center of the grindstone. Root fragments are seen in the surrounding soil. Photo scale in cm. View looking south. Site Ngre Kataa. 1 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19130
Provenance:: Ngre Kataa, Mound 6, Unit 48N 4W, Level 4
Date:: 2008-07-01
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone
Subjects Facet:: Excavations (Archaeology); Archaeology; Copper alloy
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-01
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

17. Slag and copper alloy rod, Ngre Kataa, 2008

Description:: A small piece of slag (top) and a copper alloy ( brass) rod fragment (bottom, SF 08-053). The greenish hue of the rod is a product of weathering. These artifacts were found next to one another in unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. They were found adjacent to and below a large grinding stone (GS 08-04). Site Ngre Kataa. 1 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19129
Provenance:: Ngre Kataa, Mound 6, Unit 48N 4W, Level 4. Piece plot 178 cm S, 142 cm W, 54 cm bd.
Date:: 2008-07-01
Location(s) Facet:: Ngre Kataa
Subjects:: Slag
Subjects Facet:: Copper alloys; Artifacts (Antiquities); Archaeology
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-01
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

18. In situ pottery, anvil and grinding stones, Ngre Kataa, 2008

Description:: Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19138
Provenance:: Ngre Kataa, Mound 6, 44N 6W, 70 cm bd
Date:: 2008-07-05
Location(s) Facet:: Ngre Kataa
Subjects:: Anvil stone; Grinding stone; Jar
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-05
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

19. In situ pottery and grinding stones, Ngre Kataa, 2008

Description:: Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
Provenance:: Ngre Kataa, Mound 6, 42-46N 4W, Level 2
Date:: 2008-07-05
Location(s) Facet:: Ngre Kataa
Subjects:: Grinding stone; Anvil stone
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Metalworking
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-05
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:: 8.11277778, -2.30611111

20. Pottery bowl and iron bangles, Ngre Kataa, 2008

Description:: The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
Rights:: Creative Commons Attribution-NonCommercial
Publisher:: University of Victoria Libraries
Relation:: https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19144; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19147; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
Provenance:: Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
Date:: 2008-07-09
Location(s) Facet:: Ngre Kataa;8.11277778, -2.30611111
Subjects Facet:: Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
Creator:: Dr. Ann B. Stahl
Date searchable:: 2008
Date searchable:: 2008-07-09
Genre Facet:: Digital image
Format:: Image
Source:: Dr. Ann B. Stahl
Location(s):: Ngre Kataa;
Coverage-Temporal:: Ngre Kataa
Geographic Coordinates:: 8.11277778, -2.30611111

« Previous
Next »
1
2 Current Page, Page 2
3
4

Search

Search Constraints

Search Results