Two views of a serpent-like figure made from an iron rod. The "head" of the direct metal sculpture resembles a triangular-tipped iron projectile point, similar to those found on the same site during the same time period. The body is formed by undulating S-shaped loops which are stacked atop one another to form the "tail." Kuulo Kataa, Mound 118, Unit 62W 4N, Level 1. Scale in cm. Length: 8.4 cm. 39.6 g. Kuulo Kataa, 15 June, 1995.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Kuulo Kataa, Mound 118, Unit 62W 4N, Level 1
Location(s) Facet:
Kuulo Kataa
Subjects:
Serpents
Subjects Facet:
Direct metal sculpture; Archaeology; Snakes; Iron; Projectile point; Artifacts (Antiquities)
A copper alloy finger ring made from a rod forged into undulating S-shaped loops and joined at its ends by a flat metal plate. Two views. From Kuulo Kataa, Mound 101, Unit 2W 2S, Level 7. Height: 1.4 cm. Width: 2.6 cm. Weight: 8.4 g. Kuulo Kataa, 9 June, 1995.
Photo of a reconstructed carinate globular pottery jar, with profile depicted (left). The jar was found in an upright position beneath a lens of hardened clay, its rim at 211 cm below datum and its base at 224 cm bd. The jar's mouth is small. Below its lip is a ridge marked with vertical impressions. The surface above the carinated shoulder is decorated with alternating horizontal lines of dentate (comb) impression and grooving. Below the carination, the base and lower portions of the jar are decorated with a carved roulette impression. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. An INAA sample (NA "KK 95-61") from this jar was assigned to the "K1" group of ceramic fabrics. The jar was therefore likely made east of the Banda hills. A jar of similar form, decoration, and interior wear (KK 95-693) was found one meter away and at a slightly lower level in the east profile wall of the excavation unit. Rim diameter: 8 cm. Photo scale in cm. Kuulo Kataa. 13 June, 1995.
Photo of a patially reconstructed carinate globular pottery jar, with profile depicted (left). The jar was partially exposed, sitting upright in the east profile wall of the unit. The jar broke insitu and half of the vessel was removed and reconstructed. The jar has a narrow mouth. Alternating horizontal bands of shallow grooving and dentate (comb) impression decorate the area below the lip. A horizontal grooved line and a line of dentate (comb) impression applied above the carinated shoulder meet at small circular punctate impressions. The base and lower portions of the jar are decorated with a carved roulette impression. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. A jar of similar form, decoration and interior wear was found one meter away and at a slightly higher level in the same unit (KK 95-350). Rim diameter: 10 cm. 50% of vessel reconstructed. Photo scale in cm. Kuulo Kataa. 10 July, 1995.
Photo (interior) of a reconstructed carinate globular pottery jar, with profile depicted (left). The jar was partially exposed, sitting upright in the east profile wall of the unit. The jar broke insitu and half of the vessel was removed and reconstructed. The jar has a narrow mouth. The interior surface of the jar is heavily eroded, perhaps an indication that the jar was used to store a fermented liquid like millet or sorghum beer. A jar of similar form, decoration and interior wear was found one meter away and at a slightly higher level in the same unit (KK 95-350). Rim diameter: 10 cm. 50% of vessel reconstructed. Photo scale in cm. Kuulo Kataa. 10 July, 1995.
Photo of an inward-curving (recurved) jar rim sherd, with profile depicted (left). A zone of diagonally oriented dentate (comb) impressions is bounded on upper and lower edges by a shallow horizontal groove. A mica paint/slip was applied over top of the dentate impressions. The ceramic fabric was tempered with angular quartz grit. An INAA sample ("KK NA-29") was unassigned to a specific group of ceramic fabrics, lending no insight into where the jar was made. Interior neck diameter: 18 cm. Sherd represents an 12% of the jar's circumference. Scale in cm. Kuulo Kataa. 25 June, 1995.
Photo of an everted-rim pottery jar (Vessel B) excavated from Kuulo Kataa, Mound 101, Unit 2W 2S, levels 6-7, where the jar was positioned upright. A broken pedestal base (Vessel A, originally part of another vessel) sat atop the jar. The jar has a carinated shoulder and a rounded base. Above the carination, the jar's exterior surface is decorated with four horizontal grooved lines, between which are lines of dentate impression. Immediately above the carination in three locations around the vessel's circumference are triangular clusters formed by three circulate punctates joined by short grooved lines enclosing dentate impressions. In a zone marked by two parallel grooved lines, the jar's base is surface treated with carved routlette impressions. Rim diameter 20.8 cm at interior lip. Vessel height (base to rim) 15.8 cm. Photo scale in cm. Kuulo Kataa, 9 June, 1995.
A short-stemmed, locally made clay smoking pipe, 3 views (bottom left: view from front; bottom right: side with pipe bowl to the left; top: view from top). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's bowl has a slightly flared base, the bottom of which shows signs of abrasion. Above its base, the pipe bowl is outward flaring. The bowl is decorated by overall diagonal incisions that meet to form a "V" pattern. The front is marked by a vertical row of circular impressions. Rounded appliques have been added to the bowl near to its base. The bowl's rim is missing. Its stem joins the bowl at its base (a "single-angled" form). The cylindrical stem is slightly collared at its end and has a rounded lip. The pipe has been minimally cleaned on the exterior and soil remains in the bowl interior. Photo scale in cm. Site Kuulo Kataa. 6 July, 1995.
A short-stemmed, locally made clay smoking pipe, 3 views (bottom left: bowl base and step viewed from top; bottom right: bowl base and stem from side, with pipe bowl to the left; top: bowl front). Pipes like this were inspired by those used by America's First Peoples from whom Europeans learned about tobacco. Europeans introduced tobacco smoking to West Africa during the early centuries of trans-Atlantic trade. This pipe's bowl has a slightly pedestaled base, the bottom of which shows signs of abrasion. Above its base, the pipe bowl is outward flaring and constricts slightly at the lip. The upper area of the bowl is decorated by overall vertical incisions interspersed with single vertical rows of circular impressions. A horizontal groove marks the boundary between a lower zone decorated with angled incisions. The pipe's stem joins the bowl above the bowl base (a "double-angled" form) and its lip is rounded. The pipe has been decorated with an overall red slip. It has been minimally cleaned on the exterior and soil remains in the bowl interior, with the end of a root visible in the bowl's base. Photo scale in cm. Site Kuulo Kataa. 29 June, 1995.
A curved iron blade (brɔfiɛn in Nafaanra), rounded at the tip (left), slightly shouldered at the base, with a long tang (right) for the purpose of hafting. The tool shows signs of corrosion. The artfiact was excavated from a house mound and found in a level of midden-like deposits. Scale in cm. Length: 11.2 cm. Weight: 11.7 gm. Site Kuulo Kataa. 14 June, 1995.