Search Constraints
You searched for:
Time Period
ngre phase (late)
Remove constraint Time Period: ngre phase (late)
Number of results to display per page
Search Results
- Description:
- Partial iron projectile point, the tip of the head (left) broken off. The base of the head forms a right angle barb with the short tang. The tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood to form an arrow. This point was found in an area (mound 7) that archaeologists interpret as a house mound. The artifact is corroded by rust. Scale in cm. Length: 9.1 cm. Weight: 13.6 g. Site Ngre Kataa. 4 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 7, Unit 10N 30E, Level 8
- Date:
- 2009-06-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Iron tool
- Subjects Facet:
- Projectile points; Iron; Archaeology; Artifacts (Antiquities)
- Identifier:
- SF 09-114
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-04
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- Interior view (left) and exterior view (right) of a partial pottery jar. The pot was found insitu near an anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop. The jar's everted rim is rounded (right, top). Its exterior surface (right, bottom) shows evidence of layering, with an upper layer of clay added to a leather-hard lower layer before the pot was fired. The pot's walls are thicker than typical domestic pottery. Its find location suggests that it was probably made for an industrial rather than domestic purpose (possible pot bellow?). Dark smudging on the exterior surface affected both the upper and lower layers of clay, implying that it was exposed to high heat in a reducing atmosphere after manufacture. Striations on the vessel's interior (left) are the result of smoothing and forming during manufacture, with a small area of post-manufacture smudging visible (upper left). The vessel's ceramic fabric is tempered with laterite and crushed slag inclusions. It was found in close association with an anvil/grinding stone (GS 09-15), a circular iron disc (SF 09-370) and an irregularly shaped flat piece of iron (SF 09-371). Intact rim's diameter (exterior lip): 13.5 cm. Photo scale in cm. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102 ;
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 4, 97-105 cm bd
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Jar
- Subjects Facet:
- Pottery; Archaeology; Artifacts (Antiquities)
- Identifier:
- NK 09-787
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Commentary:
- Composite photo made using Adobe Photoshop 2020
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A piece of a copper alloy (brass) bar, found in association with burned features that archaeologists interpret as linked to metalworking (left: side view; right, end views). The bar is square in cross-section (right). One end appears finished and has a slight circular depression or dimple (bottom right). The other end (top right) is jagged and appears to be broken from a longer bar. The artifact was recovered from soil associated with an amorphous burned feature, underneath which were a series of burned basins likely created by forging activities. The object is similar in appearance to brass bars known from the Ma'adin Ijafen cache of brass ingots documented by Theodore Monod in eastern Mauritania in the 1960s. As such, this may be the form in which metalworkers got the copper alloys that were worked at the site. Length: 1.7 cm. Weight: 2.8 g. Scale in cm. Site Ngre Kataa. 25 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 8W,Level 5. Piece plot: 198 cm W, 88 cm S, 110 cm bd
- Date:
- 2009-06-25
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Archaeology; Artifacts (Antiquities); Copper alloys; Metalworkinig
- Identifier:
- SF 09-293
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-25
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Commentary:
- Composite photo made using Adobe Photoshop 2020
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A flat, thin iron disk. The object is corroded by rust. Its function is unknown. The disc was found in close association with a large anvil or grinding stone and adjacent to a distinctive pottery vessel and a smaller, irregularly shaped piece of flat iron (SF 09-171). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 9.4 cm. Thickness: .2 cm. Weight: 49.3 g. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 134-140 cm S, 144-151 cm W, 100-107 cm bd
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Iron; Artifacts (Antiquities); Archaeology
- Identifier:
- SF 09-370
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
26. 17-19103
- Description:
- A flat, irregularly shaped iron with circular depression. The object is corroded by rust and its original form and function are unknown. It was found in close association with a large anvil or grinding stone (GS 09-15), a circular iron disk (SF 09-370) and a distinctive pottery vessel (NK 09-787). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 5.7 cm. Thickness: .2 cm. Weight: 9 g. Site Ngre Kataa. 4 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 130-134 cm S, 152-155 cm W, 109-112 cm bd
- Date:
- 2009-07-04
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Iron; Artifacts (Antiquities); Archaeology
- Identifier:
- SF 90-371
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-04
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
- Date:
- 2009-06-24
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-24
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- A cluster of burned features is exposed in the northwest corner of excavation unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). Along the unit's west wall (left in photo) is an amorphous zone of fire-hardened red (Munsell color 2.5YR 3/6) matrix. A piece of brass bar (SF NK 09-293) was found in soil associated with this burned feature. Above and to the right (northeast), two circular burned features are visible in outline. These basin-shaped features had a thin lining of fire-hardened sediment, red to dark red (Munsell 2.5 YR 3/6 & 4/8) in color. The basins were filled with loose ashy sediment and small pieces of charcoal. A sample of burned matrix from feature 1 (top right basin) yielded a thermoluminescence (TL) age estimate of 1500 +/- 40 CE (Univ. Wash. 2455). Further excavation revealed additional basin-shaped features beneath the amorphous burned feature. The excavation unit's northwest corner peg is visible, upper left. View looking north. Site Ngre Kataa. 27 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19109 ; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19111
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
- Date:
- 2009-06-27
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking; Forging
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-07
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- The south wall of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop. An anvil stone (GS 09-06; left of the sign board) is pedestaled insitu in the adjacent excavation unit (48N 0W). Other pedestaled grinding stones are visible to the right and behind the sign board. These stones were found just below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below the anvil stone. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Ashy lenses are visible in the south and west walls. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Width of unit: 2 meters. Site Ngre Kataa. 9 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19116
- Provenance:
- Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
- Date:
- 2009-07-09
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-09
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111
- Description:
- The southeast corner of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop (mound 6). An anvil stone (top of photo; GS 09-06) is pedestaled insitu in the adjacent excavation unit (48N 0W). This stone was found immediately below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Stadia rod numbered intervals of 10 cm. View looking south. Site Ngre Kataa. 9 July 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19117
- Provenance:
- Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
- Date:
- 2009-07-09
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-07-09
- Genre Facet:
- Digital image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Geographic Coordinates:
- 8.11277778, -2.30611111