Search

Start Over Subject(s) archaeology Time Period ngre phase (late)

41. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

42. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:
The southeast corner of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop (mound 6). An anvil stone (top of photo; GS 09-06) is pedestaled insitu in the adjacent excavation unit (48N 0W). This stone was found immediately below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Stadia rod numbered intervals of 10 cm. View looking south. Site Ngre Kataa. 9 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19117
Provenance:
Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:
2009-07-09
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-09
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

43. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-01) sits insitu in an excavated area interpreted as a metallurgical workshop. This was one of several boulders associated with burned features and other residues of metalworking. The boulder's upper surface showed signs of use wear and its south-facing side is marked by a deep cup-shaped depression that resulted from repeated use. A burned feature interpreted as the remains of a forge is visible behind the anvil stone (upper left) in the northwest corner of excavation unit 50N 2W. Flat photo scale in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

44. Insitu grinding stone and jar, mound 6, Ngre Kataa, 2008

Description:
View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19128
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, Level 3
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

45. Everted-rim pottery jar, Ngre Kataa, 2008

Description:
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W. Piece plot: 39-56 cm S, 37-55 cm W, 66-81 cm bd
Date:
2008-07-15
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Punctate; Cord roulette
Subjects Facet:
Archaeology; Pottery; Artifacts (Antiquities)
Identifier:
NK 08-406
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-15
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

46. Insitu anvil/grinding stones, Ngre Kataa, 2008

Description:
A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596
Provenance:
Ngre Kataa, Mound 6, Unit 46N 4W, Level 3
Date:
2008-07-03
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone; Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-03
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

47. Pottery jar, mound 6, Ngre Kataa, 2008

Description:
Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19127
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W. Piece plot: 145-160 cm W, 12-30 cm S, 46-63 cm bd
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Jar; Fiber roulette
Subjects Facet:
Archaeology; Artifacts (Antiquities); Pottery
Identifier:
NK 08-176
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

48. Burned feature and stone hammer, Ngre Kataa, 2008

Description:
A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
Provenance:
Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
Date:
2008-07-05
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-05
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

49. Insitu grinding stone, Ngre Kataa, 2008

Description:
A large grinding stone (GS 08-04) rests insitu along the south edge of unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone's visible surface is concave in profile, a result of use. The surface that is oriented face down exhibited greater wear from grinding. The white marks on the stone's upper surface were created by excavators' tools as they dug. A piece of copper alloy rod (greenish in color, SF 08-53) is visible insitu in soil below the center of the grindstone. Root fragments are seen in the surrounding soil. Photo scale in cm. View looking south. Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19130
Provenance:
Ngre Kataa, Mound 6, Unit 48N 4W, Level 4
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Copper alloy
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

50. Slag and copper alloy rod, Ngre Kataa, 2008

Description:
A small piece of slag (top) and a copper alloy ( brass) rod fragment (bottom, SF 08-053). The greenish hue of the rod is a product of weathering. These artifacts were found next to one another in unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. They were found adjacent to and below a large grinding stone (GS 08-04). Site Ngre Kataa. 1 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19129
Provenance:
Ngre Kataa, Mound 6, Unit 48N 4W, Level 4. Piece plot 178 cm S, 142 cm W, 54 cm bd.
Date:
2008-07-01
Location(s) Facet:
Ngre Kataa
Subjects:
Slag
Subjects Facet:
Copper alloys; Artifacts (Antiquities); Archaeology
Creator:
Dr. Ann B. Stahl
Date searchable:
2008
Date searchable:
2008-07-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111