Search

Start Over Date 2009 Time Period ngre phase (late)

21. Excavated burned basins, unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned basin-shaped features is exposed in the northwest corner of unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). The basins comprised a thin layer of fire-hardened sediment, red to dark red (Munsell colors 2.5 YR 3/6 & 4/8) in color. Basin features 1 (top right) and 2 (left of feature 1) measured about 8-9 cm deep and were filled with ashy soil. Basin feature 5 (far left) was shallower. Its fire-hardened surface showed a pinkish tinge. Samples of burned basin matrix from features 1 and 5 yielded thermoluminescence (TL) age estimates of 1500 +/- 40 CE (feature 1; Univ. Wash. 2455) and 1580 +/- 40 CE (feature 5; Univ. Wash. 2456). Photo bar marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 29 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-29
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

22. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

23. Anvil stones in a metallurgical workshop, mound 6, Ngre Kataa, 2009

Description:
Excavations uncovered three insitu boulders placed in a row that were used as anvil stones in an area interpreted as a metallurgical workshop. Multiple surfaces of the boulders show signs of wear caused by hammering and grinding. Repeated use of the anvil stone in the foreground (GS 09-03) has created a clear depression on its upper surface and its left side is flattened by wear. The middle anvil stone (GS 09-02) has multiple depressions created by use on its upper surface. The anvil in the rear of the photo (GS 09-01) shows wear on its top and side surfaces, with dirt still embedded in a deep cup-shaped depression on its south-facing side in this photo. To the east (right) of the boulder in foreground, the flat surface of a grinding stone (GS 09-04) is visible in the east wall of the excavation unit. A broken pedestal base of a pot sits on its side to the east (right) of the middle anvil stone. In the upper left corner of the photo, a burned feature interpreted by archaeologists as the remains of a forge has been exposed. The red-and-white band above the photo sign is a two meter scale, marked in 10 cm increments. View looking north across two exavation units: 50N 2W (top of photo) and 48N 2W (bottom of photo). The 2x2m units have been excavated to slightly different depths. Site Ngre Kataa. 1 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19121; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19181; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19182
Provenance:
Ngre Kataa, Mound 6, Units 48N 2W and 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

24. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Two stones showing evidence of use as grinding stones sit nearby, a north arrow placed by one(GS 09-10; center photo) and one in the southwest corner of the excavation unit (GS 09-08; bottom right). Another insitu anvil stone (GS 09-6) sits in the northeast corner of an adjacent excavation unit (48N 0W; top right of photo). The narrow band of loose soil angled across the southwest corner of the excavation was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19119
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

25. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:
The south wall of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop. An anvil stone (GS 09-06; left of the sign board) is pedestaled insitu in the adjacent excavation unit (48N 0W). Other pedestaled grinding stones are visible to the right and behind the sign board. These stones were found just below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below the anvil stone. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Ashy lenses are visible in the south and west walls. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Width of unit: 2 meters. Site Ngre Kataa. 9 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19116
Provenance:
Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:
2009-07-09
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

26. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

27. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:
The southeast corner of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop (mound 6). An anvil stone (top of photo; GS 09-06) is pedestaled insitu in the adjacent excavation unit (48N 0W). This stone was found immediately below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Stadia rod numbered intervals of 10 cm. View looking south. Site Ngre Kataa. 9 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19117
Provenance:
Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:
2009-07-09
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-09
Genre Facet:
Digital image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

28. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-01) sits insitu in an excavated area interpreted as a metallurgical workshop. This was one of several boulders associated with burned features and other residues of metalworking. The boulder's upper surface showed signs of use wear and its south-facing side is marked by a deep cup-shaped depression that resulted from repeated use. A burned feature interpreted as the remains of a forge is visible behind the anvil stone (upper left) in the northwest corner of excavation unit 50N 2W. Flat photo scale in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

29. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A pottery lid (NK 09-626) is positioned vertically with its interior surface facing south. Above it (slightly right) is a poorly preserved, friable dog skull. A large tree root has been truncated above and left of the pot lid. Beneath the lid is an iron bangle (SF 09-219), angled upward. The bangle is pressed up against a dog mandible, which has been placed at a diagonal angle below the pot lid, its mandibular joint oriented upward. Several teeth remain in the mandible. A burned feature can be seen immediately below this assemblage of objects. This cluster (B, 11) was part of a larger set of clusters (A-D) that archaeologists interpret as a shrine in a metallurgical workshop. Photo scale at top in cm. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 4-5, Cluster 11
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Ornaments; Bangles; Dogs; Shrines; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111

30. Base of a shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A tree that took root atop a shrine cluster has been cut back to a stump (center photo). Most of the objects in the shrine clusters (B-C) have been removed. To the left and below the tree stump, clusters of pottery (10 & 11) can be seen, including a red-colored pottery lid oriented vertically (cluster 11). An iron bangle, a dog cranium and dog mandibles were found associated with that lid. To the right (north) of the stump, a tri-looped iron bangle (SF 09-218) has been pedestaled (left of the black-and-white photo scale stick). The level above this had been covered by a cluster (cluster C) of pottery, including several pot lids, together with an iron bangle and a miniature pair of iron manacles. To the east and west, two large anvil stones are visible, one to the right (east) of the tree stump (GS 09-26) and one to the left (west, GS 09-32). To the left of the stump, a burned feature is visible below the pottery cluster (cluster 11). Photo scale bar marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19153; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19162
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 4
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Shrines; Ornaments; Bangles; Dogs; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Geographic Coordinates:
8.11277778, -2.30611111