Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Lower center of the photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. Photo scale marked in cm. View looking south. Site Ngre Kataa. 10 June 2009.
Excavation of a shrine cluster, two images. The image on left shows a pottery cluster, first exposed in June 2008, as it appeared on 10 June 2009. At bottom center of this image is a pedestal base, above which is a tight cluster of rim sherds. The curved sherd on the far right in this image is the outer edge of the pedestal-handled lid, which is fully exposed in the photo on the right, taken on 16 June 2009. A dog skull in a highly friable state is visible above and to the right of this lid in both photos. In the imgae on the right, an iron bangle (SF 09-219) can be seen resting in an angled position, below and left of which is a dog mandible. These were uncovered by excavation below and behind the pedestal base seen in the picture on the left. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 and 16 June 2009.
Two views of insitu anvil/grinding stones in excavation unit 50N 6W, part of an area (mound 6) that archaeologists interpret as a metallurgical workshop. In the photo looking northward (arrows point north), a large anvil stone (GS 09-15, foreground, left) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. A large tree root is visible to the west of the stone, behind which is an area of unexcavated soil on top of which pottery sherds had been found (now removed). To the east and flanked by the black-and-white photo scale is the partial rim of an everted-rim jar (NK 09-749). To the north of this, a large flat grinding stone (GS 09-12) has been pedestaled in place. In the view looking west, the well-worn upper surface of this narrow stone can be seen. Visible in the southern corner of the west wall of the unit (upper left) in this photo is a flat iron disc (SF 09-159), embedded in the wall above a small stone. Further excavation showed that this disc was part of an object cluster that included a tri-looped iron bangle and interpreted as part of a shrine. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
An insitu iron bangle (SF 09-132) made from a flattened iron rod with overlapping ends. The bangle occurred as an isolated find in the upper levels of an area (mound 6) that archaeologists interpret as a metallurgical workshop. Photo scales marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 6 June 2009.
An iron bangle (SF 09-132) made from a flattened iron rod with overlapping ends. One end of the bangle is bent inward. The bangle occurred as an isolated find in the upper levels of an area (mound 6) that archaeologists interpret as a metallurgical workshop. The bangle has been corroded by rusting. Scale in cm. Width: 7.9 cm. Weight: 25.6 g. Site Ngre Kataa. 6 June 2009.
Insitu pottery and iron artifacts associated with clusters B and C of what archaeologists interpret as a shrine that capped stratified deposits in a metallurgical workshop. Cluster B encompassed the objects on the south (right) side of the photo, west of (below) the tree stump. To the right of the black-and-white photo stick (lower right) is an iron spike (SF 09-174), a half bangle (SF 09-173) and a slightly curved iron disc (SF 09-172) in a carefully placed composition. Immediately to the east (above in the photo), an aglomeration of pottery sherds is stacked. Later excavation revealed a pedestal-handled pottery lid, dog skull and jaw bones carefully placed below these sherds in cluster B. Cluster C encompassed the artifacts to the north (left) of the tree stump. These included a series of pottery lids, portions of single pottery jar and sherds from other pots. An iron bangle (SF 09-148) is visible above and slightly left of the top photo scale, sitting adjacent to a pottery lid (NK 09-381) lying with its interior surface up. This wider shrine assemblage overlaid burned features associated with metalworking activities. Black-and-white photo scale in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 10 June 2009.
A curved, tanged iron blade (brɔfiɛn in Nafaanra), slightly shouldered at the base (right), with a short narrow tang for the purpose of hafting to a wood handle. The tool shows signs of corrosion. The artfiact was excavated from a house mound. Scale in cm. Length: 19.1 cm. Weight: 54.7 g. Ngre Kataa, 4 June, 2009.
Miniature iron shackles (manacles). The artifact was excavated from a context that archaeologists interpret as a shrine located in metallurgical workshop. The shrine included many pottery jars and lids, iron bangles and other objects. The miniature shackles were placed inside a pottery jar, which was found lying on its side and broken. The shackles have been corroded by rust. Scale in cm. Width: 7.4 cm. Weight: 16.1 g. Site Ngre Kataa. 9-10 June, 2009.
Iron projectile point, the head of which (left) has a rounded base. Two small barbs project from the point's long tang. To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found in an area that archaeologists interpret as a metallurgical workshop, in the vicintiy of anvil and grinding stones and features interpreted as forges. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 15.2 cm. Weight: 16 g. Site Ngre Kataa. 4 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot 68-79 cm S, 22-23 cm W, 110 cmbd
Triangular-headed iron projectile point with squared base (left) and long tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was excavated from what archaeologists interpret as a house mound. It shows signs of corrosion by rust. Scale in cm. Length: 9.6 cm. Weight: 12.6 g. Site Ngre Kataa. 3 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 6. Piece plot, 44 cm S, 127 cm W, 76 cmbd