Number of results to display per page
Search Results
21. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009
- Description:
- View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Provenance:
- Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
- Date:
- 2009-06-24
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-24
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
22. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009
- Description:
- A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
- Provenance:
- Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
- Date:
- 2009-06-02
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-02
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
23. Burned features, unit 46N 2W, Ngre Kataa, 2009
- Description:
- Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
- Provenance:
- Ngre Kataa, Mound 6, Unit 46N 2W
- Date:
- 2009-06-24
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Pottery; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2009
- Date searchable:
- 2009-06-24
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
24. Insitu grinding stone and jar, mound 6, Ngre Kataa, 2008
- Description:
- View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19128
- Provenance:
- Ngre Kataa, Mound 6, Unit 44N 4W, Level 3
- Date:
- 2008-07-01
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Jar
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking; Pottery
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-01
- Genre Facet:
- Digital image
- Format:
- Image
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
25. In situ pottery and grinding stones, Ngre Kataa, 2008
- Description:
- Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19175; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19132; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19135
- Provenance:
- Ngre Kataa, Mound 6, 42-46N 4W, Level 2
- Date:
- 2008-07-05
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Anvil stone
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-05
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
26. In situ pottery, anvil and grinding stones, Ngre Kataa, 2008
- Description:
- Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19138
- Provenance:
- Ngre Kataa, Mound 6, 44N 6W, 70 cm bd
- Date:
- 2008-07-05
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Anvil stone; Grinding stone; Jar
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-05
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
27. Pottery bowl and iron bangles, Ngre Kataa, 2008
- Description:
- The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19144; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19147; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
- Provenance:
- Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
- Date:
- 2008-07-09
- Location(s) Facet:
- Ngre Kataa;8.11277778, -2.30611111
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-09
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;
- Coverage-Temporal:
- Ngre Kataa
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
28. Insitu anvil/grinding stones, Ngre Kataa, 2008
- Description:
- A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17596
- Provenance:
- Ngre Kataa, Mound 6, Unit 46N 4W, Level 3
- Date:
- 2008-07-03
- Location(s) Facet:
- Ngre Kataa
- Subjects:
- Grinding stone; Anvil stone
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-03
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
29. Burned feature and stone hammer, Ngre Kataa, 2008
- Description:
- A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17598; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19176
- Provenance:
- Ngre Kataa, Mound 6, Unit 42N 4W, Level 2
- Date:
- 2008-07-05
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Excavations (Archaeology); Archaeology; Metalworking
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-05
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
30. Pottery bowl and iron bangles, Ngre Kataa, 2008
- Description:
- The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. At the base of the photo, center, is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north; above the photo scale) is a small coiled iron bangle made from a flattened piece of iron (SF NK 08-182). A smaller bangle-like artifact lies directly above the pot, center photo (north; SF 08-139). This area (cluster A) was part of a larger cluster (clusters A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View from above, north at top of photo. Photo scale in cm increments. Site Ngre Kataa. 9 July 2008.
- Rights:
- Creative Commons Attribution-NonCommercial
- Publisher:
- University of Victoria Libraries
- Relation:
- https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19145; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19146; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19148
- Provenance:
- Ngre Kataa, Mound 6, Unit 46N 8W, Level 2
- Date:
- 2008-07-09
- Location(s) Facet:
- Ngre Kataa
- Subjects Facet:
- Archaeology; Excavations (Archaeology); Pottery; Ornaments; Bangles; Metalworking; Shrines
- Creator:
- Dr. Ann B. Stahl
- Date searchable:
- 2008
- Date searchable:
- 2008-07-09
- Genre Facet:
- Digital image
- Format:
- Image
- Source:
- Dr. Ann B. Stahl
- Location(s):
- Ngre Kataa;8.11277778, -2.30611111
- Sketchfab Uid:
- Geographic Coordinates:
- 8.11277778, -2.30611111
- « Previous
- Next »
- 1
- 2
- 3
- 4