A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
View from above of an insitu grinding stone (GS 08-03) and a pottery jar (NK 08-176) at the base of excavation level 3 in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The grinding stone has a concave upper surface, partly obscured by unexcavated soil. Roots and rootlets are visible on the right side of the photo. Photo stick marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 1 July 2008.
Photo of a globular pottery jar (NK 08-176) found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The pot was found sitting next to a large grinding stone (GS 08-03). The jar's lip is slightly everted and its upper surface is undecorated. A horizontal band of contiguous diagonal impressions marked in alternating directions ("/\/\") appears above the jar's rounded shoulder. Its lower body and base are darkened and surface treated with fiber roulette impression. Rim diameter: 18cm at exterior lip. Vessel height (base to rim): 17 cm. Photo scale in cm. Site Ngre Kataa. 1 July 2008.
Iron projectile point fragment. The elongated head (left) has a single barb at its base and a short tang (right). The point has been corroded by rusting. Scale in cm. Length: 11.3 cm. Weight: 14 g. Site Ngre Kataa. 26 June 2008.
Excavations in units 42N 4W and 44N 4W have exposed clusters of pottery, grinding stones, tuyeres and an area of burned soil associated with metal working at mound 6, Ngre Kataa. Foreground, bottom right, are a partial pottery jar (NK 08-520) and a small flat grinding stone (GS 08-12; partially visible). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. Two pottery vessels sit at a slightly lower level (NK 08-406). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 7 July 2008.
Wide view of excavation unit 44N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Lower left, below the unit's corner stake (44N 6W), the partial rim of an everted jar (NK 08-408) has been pedestaled. It rests with its rim down. Between it and a large anvil stone (GS 08-25, center photo) is a smaller light-colored stone (GS 08-21) and piece of a jar rim. Another jar rim (NK 08-409) has been pedestaled in place to the left (east) of the anvil stone. Behind the anvil stone, an everted-rim jar (NK 08-407, photo stick in front) has been partially exposed. In the unit's center, to the right of the anvil stone, the rounded edge of a burned feature is visible. To the right (west) and in front (north) of that, a photo scale sits alongside an iron projectile point (SF 08-112). The soil around it has been dampened to aid excavation (dark circular area). To its right (west) is another piece of a worn grinding stone (GS 08-20). Visible in the adjacent units (left, east) is a grindstone (GS 08-10) which has been pedestaled in place and to its right a cluster of pottery and a tuyere (NK 08-284). View looking south. Photo bar marked in 5 cm intervals. Site Ngre Kataa. 7 July 2008.
An iron bangle (SF 08-182) made by coiling a flat iron rod with thinned pointed ends. The bangle was found in association with pottery, other bangles and artifacts (cluster A). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) that capped a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.2 cm. Weight: 38.8 cm. Site Ngre Kataa. 15 July 2008.
An iron bangle (SF 08-183) made from a spiral-twisted round iron rod with overlapping ends. The bangle was found in association with pottery, other bangles and a dog cranium and jaws (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) that capped a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 9.5 cm. Weight: 115.5 g. Site Ngre Kataa. 15 July 2008.
A pottery lid (NK 09-626) is positioned vertically with its interior surface facing south. Above it (slightly right) is a poorly preserved, friable dog skull. A large tree root has been truncated above and left of the pot lid. Beneath the lid is an iron bangle (SF 09-219), angled upward. The bangle is pressed up against a dog mandible, which has been placed at a diagonal angle below the pot lid, its mandibular joint oriented upward. Several teeth remain in the mandible. A burned feature can be seen immediately below this assemblage of objects. This cluster (B, 11) was part of a larger set of clusters (A-D) that archaeologists interpret as a shrine in a metallurgical workshop. Photo scale at top in cm. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
A fragmented pottery lid (NK 09-626) is positioned vertically with its interior surface facing south. A large tree root is visible behind the lid, below the sign board. A dog cranium positioned above and an iron bangle placed below the lid have been removed. Additional excavation has exposed several pottery rim sherds below a dog mandible, which is positioned diagonally below the pot lid with its mandibular joint oriented upward. Several teeth remain in the mandible. A second less well-preserved dog mandible has been exposed below this. A burned feature can be seen immediately below this assemblage of objects. This cluster (B, 11) was part of a larger set of clusters (A-D) that archaeologists interpret as a shrine in a metallurgical workshop. Photo scale marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 30 June 2009.
An iron bangle (SF 09-219) made from a round iron rod, its ends fused to create a continuous circle. The bangle was found beneath a pottery lid in a composition that included a dog cranium and jaw bones (cluster B/11). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 7.6 cm. Weight: 26.8 g. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 5. Piece plot: 108-112 cm S, 137-144 cm W, 108-110 cm bd
A barrel-shaped drawn glass bead (SF 08-234), opaque yellow in color. The bead is somewhat asymmetrical in shape and has angled ends. Compositional analysis of the bead (via LA-ICP-MS) showed it be made of mineral soda alumina (m-Na-Al) glass, probably produced in South Asia. The bead was found in the fill of a feature adjacent to a circular area of burned soil in a context (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Length: 4.6 mm. Weight: 0.18 g. Site Ngre Kataa. 17 July 2008.
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. Between the bowl and the photo scale is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north) is a smalled coiled iron bangle made from a flattened piece of iron (SF NK 08-182). This cluster (A) was part of a larger cluster (A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View looking north. Photo scale in 5 cm increments. Site Ngre Kataa. 9 July 2008.
A tree that took root atop a shrine cluster has been cut back to a stump (center photo). Most of the objects in the shrine clusters (B-C) have been removed. To the left and below the tree stump, clusters of pottery (10 & 11) can be seen, including a red-colored pottery lid oriented vertically (cluster 11). An iron bangle, a dog cranium and dog mandibles were found associated with that lid. To the right (north) of the stump, a tri-looped iron bangle (SF 09-218) has been pedestaled (left of the black-and-white photo scale stick). The level above this had been covered by a cluster (cluster C) of pottery, including several pot lids, together with an iron bangle and a miniature pair of iron manacles. To the east and west, two large anvil stones are visible, one to the right (east) of the tree stump (GS 09-26) and one to the left (west, GS 09-32). To the left of the stump, a burned feature is visible below the pottery cluster (cluster 11). Photo scale bar marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
An iron bangle (SF 08-184) made by coiling a flattened iron rod, its ends rounded and overlapping. The bangle was found in association with pottery, other bangles and a dog cranium and jaws (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) that capped a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 6.9 cm. Weight: 39.2 g. Site Ngre Kataa. 15 July 2008.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 2. Piece plot: 121-127 cm S, 140-150 S, 53-58 cm bd
An iron bangle (SF 09-147) fragment made from a flattened iron rod. The fragment is bent at an acute angle. It was found in association with a pottery lid, other pottery sherds, a dog cranium and jaw bones (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle fragment shows signs of corrosion by rusting. Scale in cm. Width: 7.1 cm. Weight: 9.3 g. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 2. Piece plot: 93 cm S, 144 cm W, 70-80 cm bd
An iron bangle (SF 09-170) made from a round iron rod with flattened ends. The bangle is open on one side (3/4 circle). The bangle was found in association with pottery, other bangles and artifacts (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 5 cm. Weight: 8.2 g. Site Ngre Kataa. 10 June 2009.
A cluster of four large insitu anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone at the bottom of the photo (GS 08-06) was oriented with its grinding surface down (not, therefore, visible in the photo). The middle right stone (GS 08-07) also rested with its most-used grinding surface down. The largest stone (middle, left, GS 08-05) had no clear working surface. The stone at the back (GS 08-08) was associated with a fist-sized round quartz hammerstone, seen insitu slightly above. Later exavations (2009) revealed a perforated pot (NK 09-750), lidded with the base of another pot (NK 09-750), adjacent to but approximately 40 cm below this cluster in the next excavation unit. Photo scale in 5 cm increments. Arrow pointing north, view looking east. Site Ngre Kataa. 3 July 2008.
A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the left of the hammerstone and above the right site of the photo stick. The feature is likely associated with forging activities. Photo scale at bottom marked in 5 cm intervals. View from above, north at top of photo. Site Ngre Kataa. 5 July 2008.
Photo of a pottery jar with a slightly everted rim (NK 08-406), found insitu in an area that archaeologists interpret as a metallurgical workshop. Above its rounded shoulder, the jar's surface is undecorated, with the possible exception of traces of red pigment in some areas. The jar's shoulder is decorated with a band of circular punctates interspersed with cross-hatched designs, repeated twice around the jar's circumference. Its base and lower body are surface treated with cord roulette in a zone bounded by a band of diagonal impressions which create a zigzag design ("/\/\"). The jar is fire-clouded in zones across its surface. The jar was found in the vicinty of a grinding stone (GS 08-10), a partial tuyere (NK 08-284) and a burned feature. Rim diameter at exterior lip: 20 cm. Vessel height: 19 cm. Site Ngre Kataa. 15 July 2008.
The body and base of a large pottery bowl has been exposed by exavation in unit 46N 8W. Surrounding this bowl was a cluster of sherds from other pottery vessels, now removed to expose several iron bangles of different shapes and sizes, seen insitu here. At the base of the photo, center, is an iron bangle (SF NK 08-169) formed from a spiral-twisted rod. Pedestaled to the right of the bowl (east) is an iron bangle (SF NK 08-140) made from a round rod that was coiled. Visible in the wall behind and to the right of the bowl (north; above the photo scale) is a small coiled iron bangle made from a flattened piece of iron (SF NK 08-182). A smaller bangle-like artifact lies directly above the pot, center photo (north; SF 08-139). This area (cluster A) was part of a larger cluster (clusters A-D) of artifacts that archaeologists interpret as a shrine placed in a metallurgical workshop. Rootlets are visible in the wall and floor of the unit. View from above, north at top of photo. Photo scale in cm increments. Site Ngre Kataa. 9 July 2008.
An iron bangle (SF 08-140) made by coiling a round iron rod with thinned pointed ends. The bangle was found in association with pottery, other bangles and artifacts (cluster A). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) that capped a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.8 cm. Weight: 40 g. Site Ngre Kataa. 9 July 2008.
An iron bangle (SF 08-139) made by coiling a flat iron rod. One end is pointed, the other squared. The bangle was found in association with pottery, other bangles and artifacts (cluster A). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) that capped a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 6.1 cm. Weight: 21.3 g. Site Ngre Kataa. 9 July 2008.
An iron bangle (SF 08-169) made from a round iron rod that has been spiral-twisted. The bangle's ends are flattened and overlap slightly. The bangle was found in association with pottery, other bangles and artifacts (cluster A). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) that capped a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 9.1 cm. Weight: 96.8 g. Site Ngre Kataa. 14 July 2008.
A triangular-headed iron projectile point (SF 08-112a) exposed insitu in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The point's long tang (left) is bent in a way that made it unusable. The soil around the point has been moistened by excavators to facilitate excavation. The point was found in the vicinity of burned features and anvil stones. Photo scale in cm. View looking south. Site Ngre Kataa. 7 July 2008.
A triangular-headed iron projectile point (SF 08-112a) with barbs at the head's base (left) and a long tang (right). The tang is bent, making it unusable. To make an arrow (snini in Nafaanra), the long tang would be inserted into a straight shaft made of bamboo, reed or lightweight wood. The point was exposed insitu in an area (mound 6) that archaeologists interpret as a metallurgical workshop. It was found in the vicinity of burned features and anvil stones. The point shows signs of corrosion by rusting. Scale in cm. Length: 9.8 cm. Weight: 10.2 g. Site Ngre Kataa. 7 July 2008.
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the trunk of a small tree is visible, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. Center photo, flanked by photo scales, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
A large grinding stone (GS 08-04) rests insitu along the south edge of unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone's visible surface is concave in profile, a result of use. The surface that is oriented face down exhibited greater wear from grinding. The white marks on the stone's upper surface were created by excavators' tools as they dug. A piece of copper alloy rod (greenish in color, SF 08-53) is visible insitu in soil below the center of the grindstone. Root fragments are seen in the surrounding soil. Photo scale in cm. View looking south. Site Ngre Kataa. 1 July 2008.
A small piece of slag (top) and a copper alloy ( brass) rod fragment (bottom, SF 08-053). The greenish hue of the rod is a product of weathering. These artifacts were found next to one another in unit 48N 4W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. They were found adjacent to and below a large grinding stone (GS 08-04). Site Ngre Kataa. 1 July 2008.
Looking eastward over excavation unit 48N 10W toward unit 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop, a series of anvil/grinding stones have been left in place and a burned feature exposed. Foreground, right, a large anvil stone (GS 09-33) rests atop another stone (GS 09-34). To the right (south), the circular rim of an everted-rim jar has been left in place. To the left (north) is a zone of darker ashy soil flecked with charcoal. Center photo is an anvil stone (GS 09-32), against which a partial elephant tusk--now removed--was found resting. Behind this stone is a tree root and base of a tree stump. The area from this stone (GS 09-32) and extending beyond the stump had been covered with artifacts (clusters B-D, now removed) that archaeologists interpret as a large shrine feature. Some of these artifacts were superimposed directly over the amorphous orange-red burned feature (center photo), which was likely created by high heat associated with forging metals. Other smaller stones have been left in place across the unit. Photo scales marked in 5 cm increments, arrows pointing north. Site Ngre Kataa. 4 July 2009.
An iron bangle (SF 08-184) made by coiling a flattened iron rod, its ends rounded and overlapping. The bangle was found in association with a concentration of artifacts, including pottery, other iron bangles, a dog skull and jaw bones (cluster B), that archaeologists interpret as part of a larger shrine feature (clusters A-D). This feature capped stratigraphic layers in a metallurgical workshop (mound 6). The bangle shows signs of corrosion by rusting. Scale in cm. Width: 6.9 cm. Weight: 39.2 g. Site Ngre Kataa. 15 July 2008.
An arc of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units (where the trunk of a small tree is visible, above left of the sign board). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. The everted rim of a pottery jar visible in the north wall of the excavation unit (top left) was part of an adjacent cluster (B) that also included iron bangles (SF 08-183 & 184). Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the right (east) of the burned features, two hammerstones rest insitu next to one another. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
View looking northward of early stage excavations at mound 6, Ngre Kataa, an area that archaeologists interpret as a metallurgical workshop. Center view is of units 42-48N 4W. In foreground, excavations in units 42N 4W and 44N 4W ave exposed clusters of pottery, a grinding stones, tuyeres and an area of burned soil associated with metal working. Foreground, bottom right, are a partial pottery jar (NK 08-520) and to its right (east) a small flat grinding stone (GS 08-12; ). To the left (west), framed by photo scales, is a burned feature. Next to it sits a hand-held hammerstone (GS 08-11). Above (to the north), a cluster of pottery and a partial tuyere (NK 08-284) are visible along the boundary between excavation units (marked by stakes). To the right of that cluster (east), a grinding stone (GS 08-10) has been pedestaled where it was found, resting with its working surface face down. A whole pottery vessel sit at a slightly lower level (NK 08-406) a short distance away (south east). Top center of the photo, at the far end of the excavated area, a cluster of anvil stones is visible (GS 08-05 to 08) in excavation unit 46N 4W. Excavations in the adjacent unit (46N 2W) in 2009 revealed a perforated shrine pot resting at a slightly lower level next to these stones. Photo scale adjacent to burned feature marked in 5 cm intervals. View looking north. Site Ngre Kataa. 5 July 2008.
A small round stone (GS 08-11) rests insitu next to an irregularly shaped area of burned fire-hardened sediment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The stone has wear consistent with use as a hammerstone. The burned sediment was next to a circular area of soil that showed signs of oxidation through exposure to high heat. A small piece of copper alloy metal lies at the edge of the fire-hardened sediment, to the right (west) of the hammerstone. The feature is likely associated with forging activities. The narrow dark lines in the soil are traces of animal burrowing activity. Photo scale by sign board in cm increments. View from above, arrow pointing north. Site Ngre Kataa. 7 July 2008.
Excavations on the south edge of unit 44N 4W have exposed a cluster of insitu pottery and a tuyere fragment in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Foreground, broken pieces of a pottery jar lie with their exterior surfaces facing down. Behind them and left rests a tuyere fragment (NK 08-284), its circular cross-section visible in front of the sign board. To the right (west) of this cluster is an area of dark reddened soil, one of many examples of burned soil in this area where metals were worked. This diffuse area of reddened soil extended underneath the sherd cluster, center photo. To the right, embedded in the balk behind the north arrow (to its south), the tip of a partial iron point (SF 08-159) is visible (right of the circular patch of dark soil). Photo scale in front marked in cm. Arrow pointing north. Site Ngre Kataa. 10 July 2008.
An iron"bangle" (SF 09-173) made from a flattened iron rod with rounded ends. The bangle is open on one side (1/2 circle). The bangle was found as part of a carefully laid set of objects that included an iron disc (SF 09-172) and iron spike (SF 09-174) among other artifacts (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 5 cm. Weight: 10 g. Site Ngre Kataa. 10 June 2009.
An iron bangle (SF 09-148) made from a round iron rod that has been spiral-twisted. Its ends overlap and are rounded. The bangle was found placed on the inside surface of a pottery jar resting next to a pair of miniature iron manacles (SF 09-171), around which were other pottery rims and lids (cluster C). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.1 cm. Weight: 89.9 g. Site Ngre Kataa. 9 June 2009.
A tri-looped iron bangle (SF 09-218) made from a continuous round iron rod. A detail of the triple loop is shown, right. The bangle ends are thickened and held together by a wire clasp. The bangle was found beneath a cluster (cluster C) of pottery, which archaeologists interpret as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. It rested in soil about 10 cm below a pedestal-handled pottery lid (NK 09-381) that was part of cluster C. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 10.8 cm. Weight: 26.3 g. Site Ngre Kataa. 16 June 2009.
An arc of orange-red burned features is being revealed by excavations in units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. To the left (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster that extended into adjacent units (where the everted jar rim is visible in the north wall, upper left). The base of this cluster was about 20-30 cm above the burned basins exposed in this photo. To the north of the burned features (forward right of the sign board), a zone of white plaster-like sediment is visible. Far right, archaeologist Abass Iddrisu uses a trowel to expose the contours of burned sediment in an adjacent excavation unit. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 16 July 2008.
A boulder used an an anvil stone (GS 09-03) sits insitu, center photo, in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The surface facing the camera is worn flat and smooth from use. Its upper surface shows depressions created by use. Behind this boulder is a flat grinding stone (GS 09-04) with a very worn upper surface. Another boulder (GS 09-02) is visible left (north). Behind it the pedestal base of a pot is visible along the adjacent unit's southern edge. The moistened soil in front of the sign board marked by two orange pin flags marks the find spot of an iron point (SF 09-033). Photo scale along unit edge measures two meters. Arrow pointing north. Site Ngre Kataa. 30 May 2009.
A vertical bank of orange-colored fire-hardened soil abuts a cluster of stones in what archaeologists interpret as a forge feature in a metallurgical workshop. The furnace feature occupied the northwest corner of the excavation unit. In the southern haf of the 2x2 m unit were large boulders used as anvil/grinding stones (GS 09-01 and 09-02). A tree root is visible along the base of the unit's western wall (left). Photo scale by burned feature marked in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (center), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). These objects are surrounded by broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. View looking south. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
A group of insitu artifacts interpreted by archaeologists as a shrine cluster, located in a metallurgical workshop (mound 6). The cluster included a partial everted-jar rim (upper right), in front of which (north) was a carefully placed group of iron objects, including a flattened iron disc (SF 09-172) standing on edge, a long spike (SF 09-174) positioned horizontally, on top of which rested a half bangle (SF 09-173). To the right (west) of the jar rim is another iron bangle (SF 90-170). To the right of this, surrounded by moistened soil, the edge of a large grinding stone (GS 09-32) is visible. Surrounding these objects are broken pieces of pottery. This cluster (B, 8-10) was part of a larger grouping of objects (clusters A-D) that archaeologists interpret as a shrine feature that capped a metallurgical workshop. Arrow pointing north, view from above. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 June 2009.
A slightly curved iron disc (SF 09-172). It was found positioned upright among a carefully placed set of objects in what archaeologists interpret as a shrine feature in a metallurgical workshop. A large iron spike (SF 09-174) and an iron bangle (SF 09-173) sat next to it. The disc shows signs of corrosion by rusting. Its function is unknown, though it may be a tool preform. The disc shows signs of corrosion by rusting. Scale in cm. Width: 10.7 cm. Weight: 89.8 g. Site Ngre Kataa. 10 June 2009.
A photo scale has been placed next to a partial elephant ivory tusk, which rests insitu against an anvil stone (GS 09-32) in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Several smaller stones surround the cluster. This group of objects was found adjacent to and at approximately the same depth as a series of other artifact clusters (A-D) that archaeologists interpret as a large shrine feature which capped stratified deposits associated with metalworking activities. The tusk was friable and poorly preserved, but had visible Schreger Lines diagnostic of elephant ivory. Photo scale marked in 5 cm increments. North is top of photo. Site Ngre Kataa. 10 June 2009.
An area of orange-red burned features has been exposed in excavation units 46N 8W and 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Left, back (west), the body and base of a large pottery bowl (NK 08-522) has been pedestaled insitu. A number of iron bangles surrounded this bowl (cluster A) as part of a large shrine cluster (A-D) that extended into adjacent units. The everted jar rim visible in the north wall of the excavation (upper right) was part of this wider set (cluster B). The base of these clusters was about 20-30 cm above the burned basins exposed in this photo, which were likely associated with metal forging. Center photo, flanked by a photo scale, the round rim of a pottery jar is visible in outline. To the north of the burned features (right, foreground), a zone of white plaster-like sediment is visible. Red and white scale is two meters in length. Arrow pointing north. Site Ngre Kataa. 17 July 2008.
Archaeologist Ben Nutor uses a trowel to scrape soil from around a cluster of objects that archaeologists interpret as a shrine feature (cluster A) in a metallurgical workshop (mound 6). An orange flag marks the location of an iron bangle (SF 08-140), the first of four that were found surrounding the large pottery bowl (NK 08-522) seen partially exposed in front of Nutor. An iron headpan used to carry dirt for screening sits nearby. Site Ngre Kataa. 9 July 2008.