Search

Start Over Date 2009 Format image Time Period ngre phase (late)

1. Excavations at a metal working area, Ngre Kataa, 2009

Description:
Archaeological excavations of Mound 6 at Ngre Kataa in 2009 expose a workshop where blacksmiths produced iron and copper-alloy tools and ornaments. The mound is being excavated in 2 x 2 meter units named for the coordinates of their northeast corner. In unit 50N 0W (foreground), an area of burned soil marks the location where blacksmiths heated metals. A pottery jar sits in place to the right. In surrounding units (50N 2W, 48N 0W, 48N 2W) are large anvil stones where the hot metals would have been hammered and shaped through forging. The mound's stratified deposits suggest that the workshop area was used for many decades, and perhaps centuries, between the years of about 1350 and 1520 CE (Common Era). View across the mound from the northeast looking towards the southwest. Site Ngre Kataa. 27 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6
Location(s) Facet:
Ngre Kataa
Subjects:
Workshop; Mound 6
Subjects Facet:
Handicraft; Metallurgy; Archaeology; Metalworking; Forging; Excavations (Archaeology); Iron; Copper alloys
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-27
Genre:
Digital image
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

2. Copper wire finger ring, Ngre Kataa, 2009

Description:
Finger ring made from twisted copper alloy wire. From Ngre Kataa, Mound 6, Unit 44N 4W, Level 5. Width: 2.3 cm. Weight: 1.6 g. Ngre Kataa, 8 July, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17595
Provenance:
Ngre Kataa, Mound 6, Unit 44N 4W, Level 5. Piece plot: 104 cm S, 153 cm W, 118 cm bd
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Wire; Ornaments; Rings (finger jewelry); Copper alloys; Artifacts (Antiquities)
Identifier:
SF NK 09-403
Creator:
Dr. Ann B. Stahl
Contributors:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2012-07-25
Genre:
Digital Image
Genre Facet:
Digital Image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
People Facet:
Dr. Ann B. Stahl
Geographic Coordinates:
8.11277778, -2.30611111

3. Insitu shrine clusters, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters B and C of what archaeologists interpret as a shrine (clusters A-D) which capped stratified deposits in a metallurgical workshop. Far left in unit 48N 10W, the flat surface of an anvil/grinding stone (GS 09-32) is exposed, to the left (west) of which a poorly preserved portion of an elephant tusk was found (now removed). To the right (east) of the large stone is Cluster B, which includes the group of sherds seen in the vertical exposure in front and left (west) of the tree stump. Behind the tree stump is a large cluster (C) of pottery lids, partial pots and iron objects. Photo scale marked in 5 cm increments. View looking towards northwest. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19192; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19154; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19197; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 3-4
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

4. Insitu shrine clusters, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters B-D of what archaeologists interpret as a shrine (clusters A-D) which capped stratified deposits in a metallurgical workshop. Bottom left, at the base of a balk supporting the unit peg, is cluster D, comprised of two stones flanking an iron disc, laid flat (SF 09-158), and a tri-looped iron bangle (SF 09-159). In front and left (east) of the tree stump is a large cluster (C) of pottery lids, partial pots and iron objects, including an iron bangle (SF 09-148) and a pair of miniature iron manacles (SF 09-171, "B"-shaped object). To the right (west) of the tree stump, another cluster of pottery and iron objects can be seen. Top right of the photo, a yellow notebook rests on top of an anvil/grinding stone (GS 09-32), next to which rested a poorly preserved section of an elephant ivory tusk. North arrow photo scale marked in 5 cm increments, arrow pointing north. View looking towards southwest. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19196; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19194; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 3-4
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron; Shackles
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

5. Iron tool, Ngre Kataa, 2009

Description:
An iron artifact (SF 09-031) recovered from screened soil taken from the southern end of excavation unit 50N 2W where two large boulders used as anvil/grinding stones were located. In the unit's northwest corner was a burned feature interpreted as the remains of a forge in an area where metalworking took place. The flat iron object is pointed on one end and has two rounded lobes at the other, perhaps to facilitate turning (like a key?). Its function is unknown. The object has been corroded by rusting. Scale in cm. Length: 5.7 cm. Weight: 9.3 g. Site Ngre Kataa. 30 May 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 3
Date:
2009-05-30
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Archaeology; Artifacts (Antiquities); Iron
Identifier:
SF 09-031
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-30
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

6. Burned features and insitu stones, Ngre Kataa, 2009

Description:
View across open excavations in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The photo centers on units 46N 8W (foreground) and the southern half of 48N 8W, the north wall of which (at 47N) can be seen behind the sign board. The exposed areas were excavated in 2008 and the photo taken in preparation for 2009 excavations. Traces of circular burned features, red-orange and yellow in color, can be seen in the freshly scraped surface of these units. The uppermost north arrow sits to the right (east) of the circular outline of a still-buried everted-rim jar. Another everted-jar rim can be seen exposed in the north wall at 47N. This rim and associated artifacts formed cluster B, part of a larger shrine feature (clusters A-D) that extended across the northern half of unit 48N 8W (beneath and behind the small tree trunk visible above and left of the sign board). Cluster A (unit 46N 8W) comprised a large pottery bowl surrounded by six iron bangles that was removed in 2008. It was positioned above and slightly west (left) of the burned feature (center photo) that is intersected by a tree root. Cluster B included the artifacts seen here in the north wall at 47N, together with an associated cluster of a pedestal-handled pot lid, dog skull and jaw bones revealed by further excavation beneath and west (left) of the tree stump. In the upper right of the photo (north and east), insitu anvil (GS 09-15, left) and grinding (GS 09-12, right) stones are visible in unit 50N 6W. Photo scales marked in 5 cm increments and measuring tape marks 2 m. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19170; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19143; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19152
Provenance:
Ngre Kataa, Mound 6, Units 46-48N 8W, 100 cm bd
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery; Shrines
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa; 8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

7. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:
Insitu anvil/grinding stones in excavation unit 50N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. A large anvil stone (GS 09-15, foreground, left) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. A large tree root is visible to the west of the stone, behind which is an area of unexcavated soil on top of which pottery sherds had been found (now removed). To the east and flanked by the black-and-white photo scale is the partial rim of an everted-rim jar (NK 09-749). To the north of this, a large flat grinding stone (GS 09-12) has been pedestaled in place. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

8. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:
Insitu anvil/grinding stones in excavation unit 50N 6W in an area (mound 6) that archaeologists interpret as a metallurgical workshop. Left of center photo, a large anvil stone (GS 09-15) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. Behind this stone is an area of unexcavated soil on top of which pottery sherds had been found (now removed). Lower foreground, flanked by the black-and-white photo scale, is the partial rim of an everted-rim jar (NK 09-749). To the north of this (right), a large flat grinding stone with a well-worn upper surface (GS 09-12) has been pedestaled in place. Visible in the southern corner of the west wall of the unit (upper left) in this photo is a flat iron disk (SF 09-159), embedded in the wall above a small stone. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

9. Insitu shrine clusters, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters C and D of what archaeologists interpret as a shrine that capped stratified deposits in a metallurgical workshop. Cluster D appears in the foreground, left, below unexcavated soil remaining around the 48N 8W unit peg. Here two small stones flank a flat iron disc (SF 09-159, left) and a tri-looped iron bangle (SF 09-158, right). Cluster C is a large grouping of pottery and iron objects located north of the tree stump, center photo. Included were several whole pottery lids, a broken but mostly complete jar associated with an iron bangle (SF 09-148) and a pair of miniature iron manacles (SF 09-171). The bangle is visible, resting on a soil pedestal in front of the tree trunk's center. In the photo's upper right, a large anvil stone (GS 09-32), on which sits a yellow notebook, is visible. Flanking this stone on its western edge was a portion of an ivory tusk. Photo scale marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19193; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

10. Insitu shrine cluster, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Center photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. At center photo, bottom, a pot lid with a strap handle (NK 09-382) rests on its side. To the right of the north arrow, portions of an another pedestal-handled pot lid lie with its interior oriented upward. Photo scale at upper right marked in cm. Arrow pointing north. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19194; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19192; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19191
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron; Shackles
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

11. Insitu shrine cluster, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with cluster C of what archaeologists interpret as a shrine (clusters A-D) that capped stratified deposits in a metallurgical workshop. Lower center of the photo are two large pieces of an everted-rim jar, its exterior surface facing outward. Immediately above is a large portion of the same pot, its interior surface facing outward. Found positioned against the jar's interior surface was a pair of miniature iron manacles (SF 09-171, "B"-shaped object). An iron bangle (SF 09-148) was positioned at the jar's mouth, above the manacles. To the left of the bangle is the upper edge of a large grinding stone (GS 09-26), which later excavations revealed to be oriented with its grinding surface down. To the right of the bangle, a pedestal-handled pot lid (NK 09-381) rests with its interior surface oriented upward. Photo scale marked in cm. View looking south. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19080; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19161; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19193
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron; Shackles
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

12. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
Excavation of a shrine cluster, two images. The image on left shows a pottery cluster, first exposed in June 2008, as it appeared on 10 June 2009. At bottom center of this image is a pedestal base, above which is a tight cluster of rim sherds. The curved sherd on the far right in this image is the outer edge of the pedestal-handled lid, which is fully exposed in the photo on the right, taken on 16 June 2009. A dog skull in a highly friable state is visible above and to the right of this lid in both photos. In the imgae on the right, an iron bangle (SF 09-219) can be seen resting in an angled position, below and left of which is a dog mandible. These were uncovered by excavation below and behind the pedestal base seen in the picture on the left. Photo scale marked in 5 cm increments. Site Ngre Kataa. 10 and 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19153; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19154
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 4-5, Cluster 11
Date:
2021-03-19
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Ornaments; Bangles; Dogs; Shrines; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

13. Insitu anvil and grinding stones, Ngre Kataa, 2009

Description:
Two views of insitu anvil/grinding stones in excavation unit 50N 6W, part of an area (mound 6) that archaeologists interpret as a metallurgical workshop. In the photo looking northward (arrows point north), a large anvil stone (GS 09-15, foreground, left) sits next to a small stone, its lower surface worn flat by serving as a hand-held grinder. A large tree root is visible to the west of the stone, behind which is an area of unexcavated soil on top of which pottery sherds had been found (now removed). To the east and flanked by the black-and-white photo scale is the partial rim of an everted-rim jar (NK 09-749). To the north of this, a large flat grinding stone (GS 09-12) has been pedestaled in place. In the view looking west, the well-worn upper surface of this narrow stone can be seen. Visible in the southern corner of the west wall of the unit (upper left) in this photo is a flat iron disc (SF 09-159), embedded in the wall above a small stone. Further excavation showed that this disc was part of an object cluster that included a tri-looped iron bangle and interpreted as part of a shrine. Photo scales marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19118
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 4
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Pottery; Metalworking; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

14. Insitu iron bangle, Ngre Kataa, 2009

Description:
An insitu iron bangle (SF 09-132) made from a flattened iron rod with overlapping ends. The bangle occurred as an isolated find in the upper levels of an area (mound 6) that archaeologists interpret as a metallurgical workshop. Photo scales marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19190
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 2. Piece plot: 12 cm S, 135 cm W, 80 cm bd
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Archaeology; Artifacts (Antiquities); Excavations (Archaeology)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Ditigal image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

15. Iron bangle, Ngre Kataa, 2009

Description:
An iron bangle (SF 09-132) made from a flattened iron rod with overlapping ends. One end of the bangle is bent inward. The bangle occurred as an isolated find in the upper levels of an area (mound 6) that archaeologists interpret as a metallurgical workshop. The bangle has been corroded by rusting. Scale in cm. Width: 7.9 cm. Weight: 25.6 g. Site Ngre Kataa. 6 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19189
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 2. Piece plot: 12 cm S, 135 cm W, 80 cm bd
Date:
2009-06-06
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-132
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-06
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

16. Shrine clusters B-C, mound 6, Ngre Kataa, 2009

Description:
Insitu pottery and iron artifacts associated with clusters B and C of what archaeologists interpret as a shrine that capped stratified deposits in a metallurgical workshop. Cluster B encompassed the objects on the south (right) side of the photo, west of (below) the tree stump. To the right of the black-and-white photo stick (lower right) is an iron spike (SF 09-174), a half bangle (SF 09-173) and a slightly curved iron disc (SF 09-172) in a carefully placed composition. Immediately to the east (above in the photo), an aglomeration of pottery sherds is stacked. Later excavation revealed a pedestal-handled pottery lid, dog skull and jaw bones carefully placed below these sherds in cluster B. Cluster C encompassed the artifacts to the north (left) of the tree stump. These included a series of pottery lids, portions of single pottery jar and sherds from other pots. An iron bangle (SF 09-148) is visible above and slightly left of the top photo scale, sitting adjacent to a pottery lid (NK 09-381) lying with its interior surface up. This wider shrine assemblage overlaid burned features associated with metalworking activities. Black-and-white photo scale in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19164; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19193
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Shrines; Pottery; Bangles; Ornaments; Iron
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

17. Tanged iron blade, Ngre Kataa, 2009

Description:
A curved, tanged iron blade (brɔfiɛn in Nafaanra), slightly shouldered at the base (right), with a short narrow tang for the purpose of hafting to a wood handle. The tool shows signs of corrosion. The artfiact was excavated from a house mound. Scale in cm. Length: 19.1 cm. Weight: 54.7 g. Ngre Kataa, 4 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 28-30E, Level 7
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Blades (tool and equipment components); Cutting tools; Knives; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-113
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

18. Miniature iron shackles from a shrine cluster, Ngre Kataa, 2009

Description:
Miniature iron shackles (manacles). The artifact was excavated from a context that archaeologists interpret as a shrine located in metallurgical workshop. The shrine included many pottery jars and lids, iron bangles and other objects. The miniature shackles were placed inside a pottery jar, which was found lying on its side and broken. The shackles have been corroded by rust. Scale in cm. Width: 7.4 cm. Weight: 16.1 g. Site Ngre Kataa. 9-10 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19161
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3. Piece plot, 41cm S, 75 cm W, 83 cm bd
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects:
Manacles
Subjects Facet:
Shackles; Iron; Leg irons; Handcuffs; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-171
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

19. Iron projectile point, Ngre Kataa, 2009

Description:
Triangular-headed iron projectile point with squared base (left) and long tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was excavated from what archaeologists interpret as a house mound. It shows signs of corrosion by rust. Scale in cm. Length: 9.6 cm. Weight: 12.6 g. Site Ngre Kataa. 3 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 6. Piece plot, 44 cm S, 127 cm W, 76 cmbd
Date:
2009-06-03
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-090
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-03
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

20. Iron projectile point, Ngre Kataa, 2009

Description:
Iron projectile point. The head (left) is asymmetrical, perhaps the result of its base being broken. The intact side of the base is shouldered. Two small barbs protrude from opposite sides of the point's long tang (right). To make an arrow, the tang would have been inserted into a shaft made of bamboo, reed or lightweight wood. This point was found in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The artifact has been corroded by rusting. Scale in cm. Length: 10.1 cm. Weight: 8.9 g. Site Ngre Kataa. 4 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 3
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-110
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

21. Iron projectile point, Ngre Kataa, 2009

Description:
Asymmetrical barbed iron projectile point with a bent shaft. This artifact was found in an area that archaeologists interpret as a metallurgical workshop. It was found near--and may have been part of--a large cluster of objects interpreted as a shrine. The (partial?) point has been corroded by rusting. Scale in cm. Length: 9.1 cm. Weight: 11.3 g. Site Ngre Kataa, 6 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 6. Piece plot, 5 cm S, 5 cm W, 102 cm bd
Date:
2009-07-06
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF NK 09-384
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-06
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

22. Iron projectile point, Ngre Kataa, 2009

Description:
Triangular-headed iron projectile point (SF 09-033) with a slightly squared base (left ) and a short tang (right). To make an arrow (snini in Nafaanra), the tang was inserted into a straight shaft made of bamboo, reed or lightweight wood to which it was hafted. This artifact was found close to several anvil/grinding stones in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The projectile point shows signs of corrosion by rusting. Scale in cm. Length: 8.1 cm. Weight: 9.3 g. Site Ngre Kataa. 30 May 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19181
Provenance:
Ngre Kataa, Mound 6, Unit 48N 2W, Level 5. Piece plot: 53 cm S, 20 cm W
Date:
2009-05-30
Location(s) Facet:
8.11277778, -2.30611111
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-033
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-30
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

23. Copper alloy (brass) bar, Ngre Kataa, 2009

Description:
A piece of a copper alloy (brass) bar, found in association with burned features that archaeologists interpret as linked to metalworking (left: side view; right, end views). The bar is square in cross-section (right). One end appears finished and has a slight circular depression or dimple (bottom right). The other end (top right) is jagged and appears to be broken from a longer bar. The artifact was recovered from soil associated with an amorphous burned feature, underneath which were a series of burned basins likely created by forging activities. The object is similar in appearance to brass bars known from the Ma'adin Ijafen cache of brass ingots documented by Theodore Monod in eastern Mauritania in the 1960s. As such, this may be the form in which metalworkers got the copper alloys that were worked at the site. Length: 1.7 cm. Weight: 2.8 g. Scale in cm. Site Ngre Kataa. 25 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 5. Piece plot: 198 cm W, 88 cm S, 110 cm bd
Date:
2009-06-25
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Archaeology; Artifacts (Antiquities); Copper alloys; Metalworkinig
Identifier:
SF 09-293
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-25
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Commentary:
Composite photo made using Adobe Photoshop 2020
Geographic Coordinates:
8.11277778, -2.30611111

24. Burned features unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned features is exposed in the northwest corner of excavation unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). Along the unit's west wall (left in photo) is an amorphous zone of fire-hardened red (Munsell color 2.5YR 3/6) matrix. A piece of brass bar (SF NK 09-293) was found in soil associated with this burned feature. Above and to the right (northeast), two circular burned features are visible in outline. These basin-shaped features had a thin lining of fire-hardened sediment, red to dark red (Munsell 2.5 YR 3/6 & 4/8) in color. The basins were filled with loose ashy sediment and small pieces of charcoal. A sample of burned matrix from feature 1 (top right basin) yielded a thermoluminescence (TL) age estimate of 1500 +/- 40 CE (Univ. Wash. 2455). Further excavation revealed additional basin-shaped features beneath the amorphous burned feature. The excavation unit's northwest corner peg is visible, upper left. View looking north. Site Ngre Kataa. 27 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19109; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19111
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-27
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-07
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

25. Excavated burned basins, unit 50N 8W, Ngre Kataa, 2009

Description:
A cluster of burned basin-shaped features is exposed in the northwest corner of unit 50N 8W in an area interpreted by archaeologists as a metallurgical workshop (mound 6). The basins comprised a thin layer of fire-hardened sediment, red to dark red (Munsell colors 2.5 YR 3/6 & 4/8) in color. Basin features 1 (top right) and 2 (left of feature 1) measured about 8-9 cm deep and were filled with ashy soil. Basin feature 5 (far left) was shallower. Its fire-hardened surface showed a pinkish tinge. Samples of burned basin matrix from features 1 and 5 yielded thermoluminescence (TL) age estimates of 1500 +/- 40 CE (feature 1; Univ. Wash. 2455) and 1580 +/- 40 CE (feature 5; Univ. Wash. 2456). Photo bar marked in 5 cm increments. Arrows pointing north. Site Ngre Kataa. 29 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19110
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W,Level 6
Date:
2009-06-29
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-29
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

26. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Two stones showing evidence of use as grinding stones sit nearby, a north arrow placed by one(GS 09-10; center photo) and one in the southwest corner of the excavation unit (GS 09-08; bottom right). Another insitu anvil stone (GS 09-6) sits in the northeast corner of an adjacent excavation unit (48N 0W; top right of photo). The narrow band of loose soil angled across the southwest corner of the excavation was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19119
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

27. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-01) sits insitu in an excavated area interpreted as a metallurgical workshop. This was one of several boulders associated with burned features and other residues of metalworking. The boulder's upper surface showed signs of use wear and its south-facing side is marked by a deep cup-shaped depression that resulted from repeated use. A burned feature interpreted as the remains of a forge is visible behind the anvil stone (upper left) in the northwest corner of excavation unit 50N 2W. Flat photo scale in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

28. Anvil stones in a metallurgical workshop, mound 6, Ngre Kataa, 2009

Description:
Excavations uncovered three insitu boulders placed in a row that were used as anvil stones in an area interpreted as a metallurgical workshop. Multiple surfaces of the boulders show signs of wear caused by hammering and grinding. Repeated use of the anvil stone in the foreground (GS 09-03) has created a clear depression on its upper surface and its left side is flattened by wear. The middle anvil stone (GS 09-02) has multiple depressions created by use on its upper surface. The anvil in the rear of the photo (GS 09-01) shows wear on its top and side surfaces, with dirt still embedded in a deep cup-shaped depression on its south-facing side in this photo. To the east (right) of the boulder in foreground, the flat surface of a grinding stone (GS 09-04) is visible in the east wall of the excavation unit. A broken pedestal base of a pot sits on its side to the east (right) of the middle anvil stone. In the upper left corner of the photo, a burned feature interpreted by archaeologists as the remains of a forge has been exposed. The red-and-white band above the photo sign is a two meter scale, marked in 10 cm increments. View looking north across two exavation units: 50N 2W (top of photo) and 48N 2W (bottom of photo). The 2x2m units have been excavated to slightly different depths. Site Ngre Kataa. 1 June, 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19121; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19181; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19182
Provenance:
Ngre Kataa, Mound 6, Units 48N 2W and 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

29. Iron disc, Ngre Kataa, 2009

Description:
A flat, thin iron disk. The object is corroded by rust. Its function is unknown. The disc was found in close association with a large anvil or grinding stone and adjacent to a distinctive pottery vessel and a smaller, irregularly shaped piece of flat iron (SF 09-171). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 9.4 cm. Thickness: .2 cm. Weight: 49.3 g. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 134-140 cm S, 144-151 cm W, 100-107 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 09-370
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

30. 17-19103

Description:
A flat, irregularly shaped iron with circular depression. The object is corroded by rust and its original form and function are unknown. It was found in close association with a large anvil or grinding stone (GS 09-15), a circular iron disk (SF 09-370) and a distinctive pottery vessel (NK 09-787). This group of objects was located within an area (mound 6) that archaeologists interpret as a metallurgical workshop. Scale in cm. Width: 5.7 cm. Thickness: .2 cm. Weight: 9 g. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19107; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 5. Piece plot: 130-134 cm S, 152-155 cm W, 109-112 cm bd
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 90-371
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

31. Stratified deposits, south wall, unit 50N 0W, Ngre Kataa, 2009

Description:
The south wall of excavation unit 50N 0W in mound 6 shows stratified layers that accumulated in an area interpreted as a metallurgical workshop. An anvil stone (GS 09-06; left of the sign board) is pedestaled insitu in the adjacent excavation unit (48N 0W). Other pedestaled grinding stones are visible to the right and behind the sign board. These stones were found just below the mound's top surface. A smaller grinding/anvil stone is visible in the east wall of unit 50N 0W, at a depth of one meter below the anvil stone. Burned orange-red lenses that archaeologists interpret as features associated with processing metals are visible in the strata between the stones. Ashy lenses are visible in the south and west walls. Evidence suggests that these layers built up through repeated use of this location for metalworking activities. Width of unit: 2 meters. Site Ngre Kataa. 9 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19116
Provenance:
Ngre Kataa, Mound 6, Univ 50N 0W, South Wall
Date:
2009-07-09
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

32. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
View across four excavation units, looking west across an area interpreted as a metallurgical workshop. An anvil stone (GS 09-01) sits insitu in the foreground in unit 50N 2W. In the northwest corner of the same unit (below the roll of red flagging tape, right), the remains of a partially excavated burned feature interpreted as a forge are visible. A pottery jar (NK 09-686), lidded with a broken rounded base of another pot, is visible in the next unit (50N 4W). It sits adjacent to another burned feature in the unit's northwest corner (behind the pot, not visible in this photo). The jar is overlaid by another burned feature (visible as a layer of orange soil). A second pot (NK 09-685), to the left of the first, is covered by a flat stone (GS 09-13) whose lower surface shows evidence of grinding. A larger flat U-shaped grinding stone (GS 09-12) sits insitu atop a soil pedestal in the northeast corner of the next unit (50N 6W). To the south (left) of the stones, a partially exposed jar rim (NK 09-749) is visible close to the eastern edge of unit 50N 6W). Behind it, a large anvil/grinding stone (GS 09-15; faintly visible because it blends into the surrounding soil color) is partially exposed, with a smaller hammer/grinding stone (GS 09-16) sitting in front and left (south) of the large stone. A smaller grinding stone (GS 09-19; upper left of photo) has been pedestaled insitu in the farthest unit (50N 8W). Subsequent excavations in unit 50N 8W revealed a series of burned features in its northwest corner. A two meter yellow tape is extended along the edge of unit 50N 4W (right). Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Units 50N, 2 to 8 W, various levels
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Pottery
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

33. Anvil stone in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used as an anvil stone (GS 09-07) sits insitu in an excavated area interpreted as a metallurgical workshop. A black-and-white photo scale stick stands vertically against it. The boulder's upper surface shows signs of use wear and its north-facing side is marked by a cup-shaped depression that resulted from repeated use. To the north (left; center photo), a fist-sized hammer stone (GS 09-09) rests insitu on a pedestal of soil left in place as the unit was excavated. Another stone that shows evidence of use as a grinding stone sits nearby (GS 09-10; left in photo). The narrow band of loose soil angled across the southwest corner of the excavation unit (right of photo) was created by a burrowing animal. Photo stick and small arrow scale in 5 cm intervals; large arrow in 10 cm intervals. Photo scale arrows pointing north. Site Ngre Kataa. 2 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19120
Provenance:
Ngre Kataa, Mound 6, Unit 50N 0W, Level 2
Date:
2009-06-02
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-02
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

34. Burned features, unit 46N 2W, Ngre Kataa, 2009

Description:
Three burned features are visible at the base of level 6 in unit 46N 2W. Two circular features (F1, right & F2, left) have been cross-sectioned, creating a straight edge. Burned feature 3 is an irregularly shaped (rectangular) area pedestaled on the east (right) side of the excavation unit. Along the unit's west wall (left) is an unexcavated rectangular area. Within this matrix was a perforated pot (NK 09-789) lidded with the pedestal base from another pot. The perforated pot contained cowries and small fragments of iron. In units to the north (behind), a row of insitu anvil stones (GS 09-03, -09-02 and 09-01, near to far) is visible in units 48N 2W and 50N 2W. To the east (right) of these, a flat grinding stone (GS 09-08) and an anvil stone (GS 09-06) can be seen insitu in units 48N 0W and 50N 0W. A pottery jar (NK 09-790) rests insitu in the center of unit 50N 0W. To the left of the archaeologist in the blue shirt (Abass Iddrisu), a flat grinding stone (GS 09-12) and a pot (NK 09-685) lidded with a grinding stone (GS 09-13) are visible on the boundary between units 50N 4-6W. Excavation units measure 2 x 2 meters. Site Ngre Kataa. 24 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-17597; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19115
Provenance:
Ngre Kataa, Mound 6, Unit 46N 2W
Date:
2009-06-24
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-24
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

35. Iron projectile point fragment, Ngre Kataa, 2009

Description:
Partial iron projectile point, the tip of the head (left) broken off. The base of the head forms a right angle barb with the short tang. The tang (right) would have been inserted into a shaft made of bamboo, reed or lightweight wood to form an arrow. This point was found in an area (mound 7) that archaeologists interpret as a house mound. The artifact is corroded by rust. Scale in cm. Length: 9.1 cm. Weight: 13.6 g. Site Ngre Kataa. 4 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 7, Unit 10N 30E, Level 8
Date:
2009-06-04
Location(s) Facet:
Ngre Kataa
Subjects:
Iron tool
Subjects Facet:
Projectile points; Iron; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-114
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

36. Iron disc, Ngre Kataa, 2009

Description:
Flat, thin iron disk (SF 09-159). The object is corroded by rust and its edges notched in two spots. Its function is unknown. The disc was found in a cluster (cluster D) with an iron bangle (SF 09-158) and two stones whose surfaces showed evidence of grinding. The cluster was part of a wider feature (clusters A-D) that archaeologists interpret as a shrine, which overlaid stratified deposits in a metallurgical workshop (mound 6). Scale in cm. Width: 8.1 cm. Thickness: .2 cm. Weight: 29.8 g. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19101
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 194 cm S, 4 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Iron; Artifacts (Antiquities); Archaeology
Identifier:
SF 09-159
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

37. Tri-looped iron bangle, Ngre Kataa, 2009

Description:
A tri-looped iron bangle (SF 09-158). The bangle was formed from a single round iron rod, looped three times at the top (detail, left). The rod is joined with a single twist at the base, with each end of the rod overlaid by a thin iron strap (bottom), causing slight thickening on either side of the twisted base. The bangle was found in close association with a flat iron disc (SF 09-159) and two stones whose surfaces showed evidence of grinding (cluster D). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.5 cm. Weight: 30.2 g. Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19092; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19099
Provenance:
Ngre Kataa, Mound 6, Unit 50N 8W, Level 3. Piece plot: 195 cm S, 22 cm W, 85 cm bd.
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-158
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

38. Insitu artifact cluster, mound 6, Ngre Kataa, 2009

Description:
A large insitu anvil/grinding stone in an area interpreted by archaeologists as a metallurgical workshop (two views). It is associated with several smaller stones that show signs of use as grinding or hammer stones. On the northwest side of the large stone (GS 09-15) is a partial pottery vessel--unusual for its layered construction (NK 09-787). Sitting adjacent to the partial pot are two flat iron discs (larger one, above in photo 1, SF 09-370 and smaller, below in photo 1, SF 90-371). A smaller grinding stone (GS 09-24) sits northeast of the anvil stone, positioned with its grinding surface down. It rested on top of a pottery jar (NK 09-788) which was exposed in the next excavation level. An area of fire-hardened sediment to the southeast of the anvil stone (photo 2) is interpreted as part of a forging feature. Photo scale bar in 5 cm increments. Photo arrow pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19104; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19103; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19102
Provenance:
Ngre Kataa, Mound 6, Unit 50N 6W, Level 7
Date:
2009-07-04
Location(s) Facet:
Ngre Kataa
Subjects:
Grinding stone
Subjects Facet:
Archaeology; Excavations (Archaeology); Iron; Pottery; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

39. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A pottery lid (NK 09-626) is positioned vertically with its interior surface facing south. Above it (slightly right) is a poorly preserved, friable dog skull. A large tree root has been truncated above and left of the pot lid. Beneath the lid is an iron bangle (SF 09-219), angled upward. The bangle is pressed up against a dog mandible, which has been placed at a diagonal angle below the pot lid, its mandibular joint oriented upward. Several teeth remain in the mandible. A burned feature can be seen immediately below this assemblage of objects. This cluster (B, 11) was part of a larger set of clusters (A-D) that archaeologists interpret as a shrine in a metallurgical workshop. Photo scale at top in cm. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 4-5, Cluster 11
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Ornaments; Bangles; Dogs; Shrines; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

40. Shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A fragmented pottery lid (NK 09-626) is positioned vertically with its interior surface facing south. A large tree root is visible behind the lid, below the sign board. A dog cranium positioned above and an iron bangle placed below the lid have been removed. Additional excavation has exposed several pottery rim sherds below a dog mandible, which is positioned diagonally below the pot lid with its mandibular joint oriented upward. Several teeth remain in the mandible. A second less well-preserved dog mandible has been exposed below this. A burned feature can be seen immediately below this assemblage of objects. This cluster (B, 11) was part of a larger set of clusters (A-D) that archaeologists interpret as a shrine in a metallurgical workshop. Photo scale marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 30 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19153;https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19155; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19195
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Levels 4-5, Cluster 11
Date:
2009-06-30
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Dogs; Shrines; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-30
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

41. Iron bangle, Ngre Kataa, 2009

Description:
An iron bangle (SF 09-219) made from a round iron rod, its ends fused to create a continuous circle. The bangle was found beneath a pottery lid in a composition that included a dog cranium and jaw bones (cluster B/11). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 7.6 cm. Weight: 26.8 g. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 5. Piece plot: 108-112 cm S, 137-144 cm W, 108-110 cm bd
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-219
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

42. Base of a shrine cluster, Mound 6, Ngre Kataa, 2009

Description:
A tree that took root atop a shrine cluster has been cut back to a stump (center photo). Most of the objects in the shrine clusters (B-C) have been removed. To the left and below the tree stump, clusters of pottery (10 & 11) can be seen, including a red-colored pottery lid oriented vertically (cluster 11). An iron bangle, a dog cranium and dog mandibles were found associated with that lid. To the right (north) of the stump, a tri-looped iron bangle (SF 09-218) has been pedestaled (left of the black-and-white photo scale stick). The level above this had been covered by a cluster (cluster C) of pottery, including several pot lids, together with an iron bangle and a miniature pair of iron manacles. To the east and west, two large anvil stones are visible, one to the right (east) of the tree stump (GS 09-26) and one to the left (west, GS 09-32). To the left of the stump, a burned feature is visible below the pottery cluster (cluster 11). Photo scale bar marked in 5 cm increments. Arrow pointing north. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19153; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19162
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 4
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Shrines; Ornaments; Bangles; Dogs; Archaeology; Artifacts (Antiquities)
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

43. Iron bangle, Ngre Kataa, 2009

Description:
An iron bangle (SF 09-147) fragment made from a flattened iron rod. The fragment is bent at an acute angle. It was found in association with a pottery lid, other pottery sherds, a dog cranium and jaw bones (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle fragment shows signs of corrosion by rusting. Scale in cm. Width: 7.1 cm. Weight: 9.3 g. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 2. Piece plot: 93 cm S, 144 cm W, 70-80 cm bd
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-147
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

44. Iron bangle, Ngre Kataa, 2009

Description:
An iron bangle (SF 09-170) made from a round iron rod with flattened ends. The bangle is open on one side (3/4 circle). The bangle was found in association with pottery, other bangles and artifacts (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 5 cm. Weight: 8.2 g. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19164; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19165
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 6. Piece plot: 98 cm S, 196 cm W, 79 cm bd
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-170
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

45. Insitu anvil/grinding stones and burned feature, Ngre Kataa, 2009

Description:
Looking eastward over excavation unit 48N 10W toward unit 48N 8W in an area (mound 6) that archaeologists interpret as a metallurgical workshop, a series of anvil/grinding stones have been left in place and a burned feature exposed. Foreground, right, a large anvil stone (GS 09-33) rests atop another stone (GS 09-34). To the right (south), the circular rim of an everted-rim jar has been left in place. To the left (north) is a zone of darker ashy soil flecked with charcoal. Center photo is an anvil stone (GS 09-32), against which a partial elephant tusk--now removed--was found resting. Behind this stone is a tree root and base of a tree stump. The area from this stone (GS 09-32) and extending beyond the stump had been covered with artifacts (clusters B-D, now removed) that archaeologists interpret as a large shrine feature. Some of these artifacts were superimposed directly over the amorphous orange-red burned feature (center photo), which was likely created by high heat associated with forging metals. Other smaller stones have been left in place across the unit. Photo scales marked in 5 cm increments, arrows pointing north. Site Ngre Kataa. 4 July 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19171
Provenance:
Ngre Kataa, Mound 6, Units 48N 10W, 48 N 8W, Level 4
Date:
2009-07-04
Location(s) Facet:
8.11277778, -2.30611111
Subjects:
Anvil stone; Grinding stone; Jar
Subjects Facet:
Excavations (Archaeology); Archaeology; Pottery; Metalworking; Forging
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-07-04
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

46. Iron bangle, Ngre Kataa, 2009

Description:
An iron"bangle" (SF 09-173) made from a flattened iron rod with rounded ends. The bangle is open on one side (1/2 circle). The bangle was found as part of a carefully laid set of objects that included an iron disc (SF 09-172) and iron spike (SF 09-174) among other artifacts (cluster B). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 5 cm. Weight: 10 g. Site Ngre Kataa. 10 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19164; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19163; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19166
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 6. Piece plot: 194 cm S, 178 cm W, 85 cm bd
Date:
2009-06-10
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-173
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-10
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

47. Iron bangle, Ngre Kataa, 2009

Description:
An iron bangle (SF 09-148) made from a round iron rod that has been spiral-twisted. Its ends overlap and are rounded. The bangle was found placed on the inside surface of a pottery jar resting next to a pair of miniature iron manacles (SF 09-171), around which were other pottery rims and lids (cluster C). Archaeologists interpret this context as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 8.1 cm. Weight: 89.9 g. Site Ngre Kataa. 9 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19080
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3. Piece plot: 52 cm S, 80 cm W, 70-80 cm bd
Date:
2009-06-09
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-148
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-09
Genre Facet:
Digtial image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

48. Tri-looped iron bangle, Ngre Kataa, 2009

Description:
A tri-looped iron bangle (SF 09-218) made from a continuous round iron rod. A detail of the triple loop is shown, right. The bangle ends are thickened and held together by a wire clasp. The bangle was found beneath a cluster (cluster C) of pottery, which archaeologists interpret as part of a larger shrine feature (clusters A-D) in a metallurgical workshop. It rested in soil about 10 cm below a pedestal-handled pottery lid (NK 09-381) that was part of cluster C. The bangle shows signs of corrosion by rusting. Scale in cm. Width: 10.8 cm. Weight: 26.3 g. Site Ngre Kataa. 16 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19156
Provenance:
Ngre Kataa, Mound 6, Unit 48N 8W, Level 3. Piece plot: 39-47 cm S, 112-122 cm W, 90 cm bd
Date:
2009-06-16
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Ornaments; Bangles; Iron; Shrines; Archaeology; Artifacts (Antiquities)
Identifier:
SF 09-218
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-16
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

49. Anvil and grinding stones in a metallurgical workshop, Ngre Kataa, 2009

Description:
A boulder used an an anvil stone (GS 09-03) sits insitu, center photo, in an area (mound 6) that archaeologists interpret as a metallurgical workshop. The surface facing the camera is worn flat and smooth from use. Its upper surface shows depressions created by use. Behind this boulder is a flat grinding stone (GS 09-04) with a very worn upper surface. Another boulder (GS 09-02) is visible left (north). Behind it the pedestal base of a pot is visible along the adjacent unit's southern edge. The moistened soil in front of the sign board marked by two orange pin flags marks the find spot of an iron point (SF 09-033). Photo scale along unit edge measures two meters. Arrow pointing north. Site Ngre Kataa. 30 May 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122; https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19089
Provenance:
Ngre Kataa, Mound 6, Unit 48N 2W, Level 4-5
Date:
2009-05-30
Location(s) Facet:
Ngre Kataa
Subjects:
Anvil stone; Grinding stone
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-05-30
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111

50. Burned feature, unit 50N 2W, Ngre Kataa, 2009

Description:
A vertical bank of orange-colored fire-hardened soil abuts a cluster of stones in what archaeologists interpret as a forge feature in a metallurgical workshop. The furnace feature occupied the northwest corner of the excavation unit. In the southern haf of the 2x2 m unit were large boulders used as anvil/grinding stones (GS 09-01 and 09-02). A tree root is visible along the base of the unit's western wall (left). Photo scale by burned feature marked in cm. Arrow pointing north. Site Ngre Kataa. 1 June 2009.
Rights:
Creative Commons Attribution-NonCommercial
Publisher:
University of Victoria Libraries
Relation:
https://exhibits.library.uvic.ca/spotlight/iaff/catalog/17-19122
Provenance:
Ngre Kataa, Mound 6, Unit 50N 2W, Level 4
Date:
2009-06-01
Location(s) Facet:
Ngre Kataa
Subjects Facet:
Excavations (Archaeology); Archaeology; Metalworking; Furnaces
Creator:
Dr. Ann B. Stahl
Date searchable:
2009
Date searchable:
2009-06-01
Genre Facet:
Digital image
Format:
Image
Source:
Dr. Ann B. Stahl
Location(s):
Ngre Kataa;8.11277778, -2.30611111
Sketchfab Uid:
Geographic Coordinates:
8.11277778, -2.30611111